Can an electric lawnmower mow wet grass?

Can I mow wet grass with an electric lawnmower?

and more often, the garden plots become not only an area where you can grow fruits and vegetables, but also a place to relax. Allocate zones, on which arbors with a barbecue are placed and flowerbeds and lawns are broken up. To have such a lawn not so much effort is needed: to water it in time and mow it.

As soon as the grass seed is sown, one must wonder what tools are needed to cut the lawn. You can’t make a straight cut with a simple scythe. A large number of different tools are available for this purpose:

Grass trimmer

It consists of a rod with handles, a special spool and a motor, which can be electric or gasoline. The reel has a bobbin, on which a special line for the trimmer is wound or a knife is put on.

Note! An electric grass trimmer simply plugs in and it’s ready to go. It is lightweight, handy, but it requires a long wire and the presence of a socket, which is not always convenient. It will be difficult to mow a large area.

  • Low-power. Handy, lightweight, but cannot mow hard, wet grass or weeds.
  • Powerful. Top-mounted and bottom-mounted models are available. You can install a special knife, which allows you to mow coarser grass. Lower-mounted models can’t cut wet grass.
  • Cordless. lightweight, mobile. Disadvantages include only one hour of battery life.

the grass trimmer with a gasoline engine is heavier than an electric mower, but it differs from it in mobility. It has a forged shaft, has shoulder straps and a powerful power drive. Gear design allows you to use not only a line for trimmer, but also a knife and toothed disc, which greatly improves the quality of treatment of the site. With the gasoline mower you can mow very large areas.

The trimmer can mow grass in hard-to-reach places (under benches, near posts), as well as mow paths, regardless of their location.

Lawn mower

You can see why it’s called a lawn mower. Looks like a cart on wheels with special blades and a device for collecting clippings. Lawn mowers come in different models:

As in the case of trimmers, gasoline lawn mowers are mobile, can work away from home. But they weigh a lot, are more difficult to use and make a lot of noise.

Lawn mowers with electric motors are lightweight, do not make much noise, are well cleaned, are absolutely harmless to the environment. The disadvantages include the need for electricity nearby.

Cordless are all good: little noise, smooth lawn, easy to work, but the battery only lasts a certain amount of time.

Spindle mowers are such mowers, where there is no motor. The device is designed as if the lawn is cut with scissors. It is very pretty and neat, but the process is very time-consuming.

Lawn shears

This tool is used in places where it is impossible to work with a lawnmower or trimmer.

Can I mow in the rain?

Gardeners often do not understand whether it is possible to mow wet grass with an electric lawnmower. Unlike a hand lawn mower, it is not a good idea to mow wet grass with a petrol lawn mower, and certainly not with an electric one. At work though electrotrimmer though analogical lawnmower the moisture can get in the electric drive or wires, the short circuit will appear, and at best the tool will burn out, and at worst the operator will suffer.

It is not worth working after a downpour and gasoline-powered machinery. The grass gets heavier, which leads to premature tool failure. First of all, because of overheating will break the piston pair and other moving parts.

Important! If you can not postpone the work, you must make breaks at intervals of 10-15 minutes and let the tool to work at idle speed.

The lawn can also be damaged. The ground will be wet, you will get furrows and the grass will be cut in ugly stripes. Young plants may be pulled out with their roots, while older grass may be cut unevenly, torn, and this may lead to various diseases. Grass after the grass trimmer will also be scattered unevenly, which can lead to bald spots on the even surface of the lawn. It turns out that you can mow damp grass with a gasoline mower, but it is better to mow at a different time.

electric, lawnmower, grass

How to mow with a gasoline trimmer, instruction for beginners

There are some indirect reasons why you can not mow grass wet from the dew or rain on the lawn. It is possible to refer to such:

The most to break a brushcutter by mowing wet vegetation? That’s easy. It is also removed because of the short circuit if water enters the power compartment. In addition, even if what remains to do our customer terrific sealed, there is a high probability that the engine will not withstand a large load created by the flexible shaft trimmer for grass. And the shaft itself can turn. Such loads in most cases come from the buildup of wet grass on the blades on the spindle where they are attached.

Trimmers with gasoline engine, mowing grass in wet weather, because of the enormous loads increases the degree of wear of the main components and assemblies. Here we should mention an early breakdown of a piston pair, and in addition other moving parts. Most piston parts burn out because the engine runs too hot. In our case, the engine will overheat from the load created by the wet grass when mowing.

If you mow damp grass with a gasoline trimmer, let the engine idle for 30 seconds without load to avoid overheating. That way you remove excessive heat and save the piston pair.

You’ve probably noticed that if you mow damp grass with a trimmer, the cut comes out jagged. It dries out, and the grass begins to turn yellow. There are several reasons for this:

You should first wait until the vegetation dries out. Grass always gets tougher as it dries. In the second case, you should change your trimmer line to a narrower one with a different profile. Practice shows that a smooth cut on damp grass can be achieved by using a profiled line with a square or, in other words, a star-shaped cross section.

Aspects of working with a fishing line. practice

Those who have ever tried to mow grass in the dew or in drizzling rain have noticed that vegetation stuck on the knife on the spindle is scattered in piles on the lawn. If they are not removed in time, in the fall of wet grass on the lawn arise laceration. Mowed piles start to rot and the lawn starts to hurt. That’s how unsightly sagging occurs.

So decide for yourself, dear readers, whether you can mow wet grass trimmer and lawn mower, if not in spite of this hunting to bring the lawn in order before the coming of the cold.

Improvement of a country site (and even adjacent territory in the city). a very complicated case. Especially because you have to take care of the economy all the time. Many people also have questions about how to do a particular job, for example, can you mow wet grass with a trimmer.

Aspects of working with a fishing line. The practice

Those who have ever tried to mow grass in the dew or in drizzling rain have noticed that the vegetation stuck on the blade of grass on the spindle is scattered in piles on the lawn. If they are not tidied up in good time, lawn sagging will occur where wet grass falls. Mowed clumps begin to rot, and the lawn begins to hurt. This is how unsightly sagging occurs.

So decide for yourself, dear readers, whether you can mow wet grass trimmer and lawn mower, if not in spite of the hunting to bring the lawn in order before the coming of the cold weather.

The arrangement of the country site (and even the adjoining territory in the city). a very complex matter. Especially because you have to take care of the farm all the time. Many people have questions about how to do this or that job, for example, can you mow wet grass with a trimmer.

Features of the situation

Of course, such a question will not arise for those who live in close proximity to the lawn. Then you can wait a while and work when the grass dries out. But the need to mow wet grass immediately arises if you can only visit the site occasionally. What to do if you have to mow the lawn at the weekend, on a rainy day, that’s the trick. Opinions of the dacha owners themselves differ, so it makes little sense to focus on their position. You need to understand the nuances yourself.

What trimmers can mow wet grass

To understand what trimmers can mow wet grass, and what do not, you should understand their structure. To date, two main types of brushcuts are available to the consumer:

Electric trimmers, depending on the location of the engine can be:

From a safety standpoint, wet grass can only be mowed with a petrol trimmer or a “litovka”. But using an electric brushcutter is highly undesirable. Especially when it comes to devices with the lower location of the engine, as they are in the zone of water. As a result, it can cause a short circuit.

Grass cutting during rain and with top mounted electric trimmers is not recommended. In case of water penetration to the power unit can not only short circuit, but also electrocute the mower.

Wet grass must not be mowed with a lawnmower with a power cable either. The reason is the same as with the electric grass trimmers with bottom-mounted power unit. there is a high probability of a short circuit. There is also a danger that you can accidentally cut the power cable which supplies the machine.

If there is still a need to cut the grass in wet weather or in the dew, it is better to use carbureted brushcutters and lawnmowers. It is much safer for life and health.

Block: 2/3 | Number of characters: 1485

Can I mow grass in the rain?

Gardeners are often confused about whether they should mow wet grass with an electric lawnmower. Contrary to a hand lawn mower, it is not a good idea to mow wet grass with a petrol lawn mower, and an electric lawn mower should not be used at all. When working with an electric trimmer or a similar lawn mower, moisture can get into the electric drive or wires, you will get a short circuit, and at best the tool will burn out, and at worst the operator will suffer.

Block: 3/5 | Number of characters: 455

How to properly mow grass on a property and avoid mistakes

Here are a few rules to be sure to keep in mind when mowing the lawn:

  • First of all, make sure that the height is the same on both sides of the mower drum, otherwise you risk simply ruining the lawn;
  • Clean the area of stones, sticks, wires and other debris that can harm the mower;
  • Sweep the lawn surface with a broom or rake to even out piles of earth after rain worms and lift the grass towards the blades;
  • Mentor the direction of cut. the neighboring strips should be at a certain angle to each other;
  • Change the direction of the stripes to perpendicular each time you mow, then you won’t get ribbed stripes on the lawn;
  • the last autumn mowing should not be done in cold winds, otherwise the tips of the grass will frost, which will negatively affect the quality of the lawn next year.

Mowing with a lawn mower is not as easy as it sounds. Of course, you should first learn how to operate the mower before you start mowing your lawn. But you can still make mistakes that can seriously compromise the appearance of your lawn. The most common mistakes:

Grass on hummocks is shaved clean

If your lawn has many bumps it is worth increasing the cutting height and adding mulch to even out the surface of the lawn. Avoid pushing or pulling the handle as much as possible when mowing.

When mowing, try not to push or jerk the mower handle back and forth

The grass tips turn brown after cutting

blunt blades in a rotary mower can cause such an effect (grass is crushed instead of being cut), damage on the lower plate of the cylinder plate or improper adjustment. Grass can also turn brown if it was wet when mowing.

The lawn looks ribbed

If narrow stripes of long and short grass appear during mowing and are perpendicular to the movement of the mower, the cylinder mower blades rotate slowly. Dew on the blades of grass can cause resistance (the lawn should therefore be swept before mowing), or the cutting height is too low or too high.

The mowed strips are crossed over the entire length with wide waves

A similar “washboard effect” occurs if the grass is cut in the same direction every time. Repeated vibrations while mowing the lawn result in waves on the ground, which is why it is so important to change the direction of the stripes with each cut. To even out the topography of the lawn, mulch may be added in the autumn.

Block: 3/4 | Number of characters: 2652

Lawn mowing basic rules

Owners of neglected lawns wonder if it is right to mow tall grass with a lawnmower. Judging by the reviews, with such a task in a few runs can cope with a quality gasoline wheeled unit with a large hopper for collecting mowed greenery. But the work is not pleasant: a lot of noise and harmful emissions.

Trimmers mow lawns in a neglected state much faster, but after completing this work it is necessary to collect the cut greenery with a rake.

Hence the conclusion: the owners of lawn mowers should not allow high growth of grass.

The question is also often raised as to whether one can mow wet grass with a petrol lawnmower. The rules state: it is not recommended to work with a lawnmower in the rain or after watering, as such mowing is of poor quality, and there is a risk of getting ugly stripes on the muddy ground

There are also other rules that must be observed when mowing the lawn.

  • A hot summer day is not a good time to cut the grass. Fresh cuts quickly dry out, their yellowing spoils the appearance of the lawn.
  • It is recommended to mow the lawn in the morning or in the evening, when it is dry and the soil and grass are dry after a day of rain or watering.
  • Always check that the mower blade is sharpened. Working with blunt blade blades causes trouble in the form of crushed leaves and uprooting grass.
  • Before you start mowing, rake to collect fallen leaves, tree branches and other debris, level the occurrence of earth mounds resulting from the life of earthworms, ants and other insects.
  • Decide on the direction of mowing so it’s at an angle to the previous one. Otherwise, the appearance of the lawn will be associated with a washboard.
  • When mowing, it is necessary to observe the parallelism of the trail and not to leave narrow strips, paying attention to the grass under the wheels.

Block: 4/6 | characters: 1876

electric, lawnmower, grass

The basic rules of mowing the lawn

Owners of neglected lawns are wondering whether it is right to mow tall grass with a lawnmower. Judging by the reviews, a quality gasoline wheeled machine with a large hopper for collecting mowed greenery can cope with such a task in a few steps. But the work is not pleasant: there is a lot of noise and harmful emissions.

It is much quicker to mow neglected lawns with a trimmer, but after finishing this work it is necessary to collect the cuttings with a rake.

Hence the conclusion: lawn mower owners should not allow the grass to grow too tall.

The question is also often raised whether one can mow wet grass with a gasoline lawnmower. The rules are: it is not recommended to work with a mower in the rain or after watering, because such mowing is of poor quality, and there is a risk to get on the muddy soil ugly stripes

In addition, there are other rules to follow when mowing the lawn.

  • A hot summer day is not the best time to cut the grass. Fresh cuts dry out quickly and their yellowing spoils the appearance of the lawn.
  • It is recommended to mow lawns in the morning or evening in dry weather, a day after rain or watering, when the soil and grass are dry.
  • Make sure the mower blade is sharpened. Mowing with blunt blade blades causes trouble by crushing the leaves and uprooting the grass.
  • Before you start mowing you need to rake to pick up fallen leaves, tree branches and other debris, rake out any earth mounds resulting from earthworms, ants and other insects.
  • Decide on the direction of cut so it’s at an angle to the previous one. Otherwise, the lawn will look like a washboard.
  • When mowing, you need to keep parallelism and not leave narrow strips, paying attention to the grass under the wheels.

Block: 4/6 | Characters galore: 1876

The care of a cut lawn

The question is what to do with the grass cuttings. leave them on the lawn or clear them away? On the one hand, a cut plant can be a great fertiliser for the lawn, it recycles the nutrients back into the soil and stops moss from spreading. so you don’t have to spend time mowing the grass off the lawn.

But there is a downside to mowing lawns: Mowing the grass leads to more weeds and earthworms, the surface of the lawn is porous and prone to disease and the lawn is less aired. So, it is better to remove the cut grass after mowing, it is recommended to leave it only in dry weather, so that the necessary moisture evaporates less from the lawn.

The lawn should be regularly mowed so that the plants are dwarfed

As for watering and feeding. they are necessary for the formation of a thick, high-quality cover, even if you have to mow the lawn more often because of the rapid growth of the grass. You would rather cut the grass more often and end up with a nice green surface without bare spots.

Lawns should be mowed regularly; then the plants will dwarf them and, instead of increasing leaf mass, will produce more and more shoots forming a dense turf. If you mow very infrequently and very short at once the grass will weaken and fall out, and instead there will be individual patches of weeds, yarrow, moss or bluegrass.

Block: 4/4 | Number of characters: 1470

Lawn mowers that run on electricity are not safe

We all know not to swim in a river, pond or sea during a thunderstorm. But then why use an electric lawnmower on a wet lawn?? You run the risk of getting an electric shock as well. When you mow with an electric mower on wet grass, there is a risk that the mower will be damaged by the moisture. It can also potentially cause injury to the person working with the mower.

Did you know that wet lawns are more difficult to mow??

You’re looking at a flat, mowed lawn? But did you know that if you mow a wet lawn with a petrol or electric lawnmower, you are unlikely to get such a perfect result? The fact is that wet blades have more difficulty cutting the grass evenly. This results in an uneven lawn. Especially with ride-on mowers. So if you really care about your lawn, it’s worth waiting until it is completely dry.

Grass trimmer for lawn mowing

The weed trimmer is essentially an electric lawn mower. It looks like a long pole with a cutting mechanism on one end and a handle on the other end. The motor can be at the top or at the bottom of the pole. it depends on whether the grass trimmer is gasoline or electric.

These grass-cutting tools come in:

Did you know? The grass trimmer was invented by a businessman from Texas. He was far from technical and had been in show business all his life.

The effectiveness of the device described depends on:

The grass trimmer works on a simple principle. the drive, gasoline or electric, spins a reel that holds the trimmer line and spool. The line ends protrude outward and act like blades when swiveling. The line can vary in thickness from 1 mm for regular, weekly mowing to 4 mm for overgrown areas.

Electric tool has a number of advantages and disadvantages.

  • Its advantages can be called:
  • practically noiseless operation;
  • the lightness of the tool;
  • easy operation;
  • the only consumable material is a line for the trimmer.
  • The minuses of such tools are considered:
  • dependence on the length of the cord and the electrical outlet;
  • Low power
  • Wet grass is forbidden.

Also, during mowing, you have to keep an eye on the cable, which can get under the cutting part of the tool. If the terrain is very overgrown, you won’t be able to cut the grass in one go. You should go over the area several times, removing 10-15 cm.

Important! For very overgrown and grassy areas you should choose trimmer models which are fitted with sharp-toothed discs.

Cordless grass trimmers are relatives of electric trimmers. They differ in that it is not necessary to connect them to the network. you only need to charge the battery. But this kind of tool can work for 25-30 min.

During this time you can mow an area of 100 m². Then you have to recharge the device, and it takes 5 to 10 hours. You can buy some extra batteries and extend the mowing time by 1-2 hours.

Gasoline grass trimmers use today’s expensive fuel. If the petrol purchase is not a problem for the landowner, then you can opt for this option. It is more powerful than an electric and is not limited by battery abilities.

With such a tool, you can mow until you run out of fuel or run out of trimmer line. In addition, similar grass trimmers that run on a mixture of gasoline and oil are much more powerful than electric ones. You can mow up to 1,000 m² of grass with a machine like this.

The disadvantages of gasoline grass trimmers are two. a lot of noise and exhaust fumes. In addition, if you do not respect the correct mixture, the device can have problems starting. Wheeled gasoline grass trimmers are almost lawnmowers. It has two large wheels for easy steering and maneuverability in particularly difficult terrain.

Mowing rules

Mowing the lawn with the device described is not difficult. Hold it by the handle and make circular movements. There are grass trimmers equipped with shoulder straps and curved handles that make work easier.

Did you know? The first grass trimmer consisted of an empty can with holes, a drill and thick fishing line. It was invented in the 1970s.

When mowing, a number of mandatory rules should be followed:

  • Do not cut the grass after rain or in high temperatures. In the first case the lawn will not be cut evenly because of the water-soaked soil, in the second case the grass cover will not be evenly restored.
  • First trim the area around the edges, and then remove the excess grass in the center. This helps to ensure the grass is the same length when cutting.
  • After cutting you should water and feed the plants, as cutting is stressful for them. These measures will help maintain the normal appearance of the lawn.
  • The removed grass tops should always be collected and removed from the area.

Do the first mowing of the new lawn after 7 to 10 days. Thereafter, this work should be done from April through October. The frequency of cutting depends on the variety of plants and the weather, but in any case it should be done once a week, and in early summer once every 3-4 days. The height of the cover should not exceed 6 cm.