Electric Grass Trimmer Tuck Line

How to tuck the line into the trimmer?

Any machine for mowing vegetation is necessarily equipped with a spool, which, in turn, may differ in different models by the filament feed system (automatic, semi-automatic and manual). It is from this parameter that it is worth starting from before deciding how to fill the line into the trimmer.

In order to tuck the line into the trimmer, you need to take at least 5 meters of material, which is then folded in half. The center of the cutting element should be inserted into a specially designated place, and then the cutting attachment should be wound on the spool showing the direction using visual cues. At the end of all the work, the lid, of course, will need to be tightened.

How do I fit the line into the trimmer? Operating tips

The trimmer is an excellent modern device designed for mowing unnecessary grass, and its main advantage is that this technique can be used in places where an ordinary lawn mower will simply not be able to reach due to its massiveness. It is necessary to understand in more detail what trimmers are, and how to choose the best option for a particular suburban area.

What is a trimmer?

This equipment is based on the following elements:

  • A motor whose main function is to rotate the cutting head at the end of the rod;
  • Directly the head, consisting of a reel on which either a fishing line or a knife can be wound;
  • High-speed rotating knives or fishing line, which are the main cutting part of the device, how to load the fishing line into the trimmer, it will go a little further.

An electric device is inferior in its power to a gasoline one, so it is ideal for working on a standard plot of land, which is adjacent to a house with source of electrical energy. The main positive aspects of this technique are the absence of noise during operation, light weight, ease of use and, of course, environmental friendliness.

Read more:  How To Assemble A Stihl Fs 38 Petrol Trimmer

As for gasoline trimmers, such equipment, of course, is more mobile, so it can be safely transported from place to place and get rid of annoying vegetation in any area. It is not necessary to use electricity here at all, which has a positive effect on the functionality of such an apparatus. the cutting attachments can be changed, working with weeds of various types.

One of the most common attachments is the fishing line, so you should dwell on this element in more detail.

Types of trimmer line

As a rule, line separation is based on different sample diameters, which can vary from 1.2 to 4 mm. The most commonly used material is a material with a thickness of 2 mm, but in no case should we forget that the choice should depend primarily on the trimmer model.

There is one main rule here: the more power the apparatus has, the thicker the line should be.

This element can also differ in the type of its section. So, it can be round (suitable for cutting plain grass) or square (for mowing soft green cover), sharp edges (tall grass) or be equipped with notches ideal for thin grass.

Do not forget that with the help of a fishing line it is allowed to mow only grass, and for other, coarser vegetation, it is imperative to use knives.

Next, you should consider in more detail the process of how to insert the line into the trimmer correctly. Indeed, it is with this procedure that many consumers often have difficulties.

Line adjustment

One of the main rules when replacing and adjusting equipment is any manipulations with the mechanism Should be carried out exclusively with the engine off and the device plug disconnected from the mains.

Electric Grass Trimmer Tuck Line

Perhaps these tips will tell you how to tuck the line into the trimmer as correctly as possible and, accordingly, give your site a neat and aesthetic appearance. All that is required is to correctly select the cutting material required by the type and, of course, to determine the category of the most used trimmer.

Read more:  The trimmer stalls when the shutter is closed

How to tuck the line into the trimmer?

In order for the area near the house to always look well-groomed and neat, it must be cut regularly. Fortunately, modern technology allows you to solve this problem without excessive physical effort. Electric trimmers are so easy to use and maintain that even a teenager can mow with them. The main thing is to figure out in advance how to fill the line in the trimmer.

How to load the line into the trimmer?

So, we are faced with the task of correctly loading the line into the trimmer. Let’s take a closer look at what it will start with and what pitfalls can await us in the process.

Step 1. choosing the line

Step 2. remove the coil from the trimmer

To perform this operation, the trimmer must be disconnected from the mains and turned over with the working head up. The further course of action depends on the trimmer model and the design of the coil itself:

  • In small trimmers with a lower engine location, press on the keys located on the sides of the coil and remove its upper part from the head;
  • On a trimmer with a curved bar, clamp the coil body with one hand, while turning counterclockwise the winged on the body;
  • In trimmers with a straight bar and a gearbox, insert a screwdriver into the hole under the coil, and then turn the coil body counterclockwise.

Step 3. disassemble the coil

After the coil is removed from the head, it must be carefully disassembled. It is better to do this on an already mown area, since there may be a spring inside the coil, which will be quite difficult to find in tall grass. After disassembly, we will have three parts on our hands: the body (top cover), the protective casing and the coil itself.

Step 4. measuring the amount of line you need

Read more:  Choosing a Garden Trimmer

Newbie mowers are usually interested in how many meters of line to wind on the trimmer reel? There are two ways to resolve this issue:

  • Unwind a skein of line on a flat, dry place and separate half of it.
  • Measure 3-4 meters of line from the skein.

In any case, after the end of the winding, the turns of the line should be on the body of the reel, and not sliding off it. You don’t need to try to wind as much as possible, as the line will unwind poorly and break more often.

Step 5. wind the line onto the reel

How to attach the line to the trimmer depends on the coil design. Consider the option when there is one outlet for the line in the coil body. In this case, the end of the line is clamped in the crevice of the reel, and then we wind the line, trying to lay the turns as tightly as possible. The direction of laying the turns should be opposite to the direction of rotation of the coil and is usually indicated on its inner part. After the end of winding on the spool, you must put on a protective casing and bring the end of the line into it

If the reel is designed to work with two tails, then the line must be folded in half and laid in the groove in the center of the reel. Further winding will be carried out along one or two slots, depending on the coil design. The direction of winding must also be opposite to the direction of rotation of the coil. At the end of the ponytail, the line will also need to be led out into the holes on the top of the reel.