The agricultural sector is no less popular throughout the world than other industries. Even in our country, although it has lost its position a little lately, agriculture has attracted increased attention of enthusiasts and everyone who wants to be engaged in this field.
Investors also consider the agricultural sector a rather attractive financial enterprise.
It is not surprising that in this area there are a huge number of companies specializing in the manufacture of special equipment for the garden and kitchen garden, as well as related equipment.
In our country there are a sufficient number of official dealers of many such organizations, for example, Crosser, a manufacturer of killers and other equipment.
About company
The Crosser company was founded in England, where it carried out all its activities, from production to the implementation of the final product. In the process of expanding the enterprise itself, it became possible to increase its representation not only in the Kingdom, but also in other European countries.
Therefore, it was decided to open several plants in Europe, which significantly increased the pace of equipment production.
For more information on the Crosser trimmer, see the video:
- attachments;
- electric and chainsaws;
- motor pumps;
- various engines;
- sprayers;
- pressure washers, etc.
The video shows the Crosser high pressure washer.
Crosser equipment is a combination of European quality and reliability in the operation of any category of equipment. As for the tillers, the widest assortment of the model range is presented here, which is able to satisfy even the most picky customer.
Technical specifications and prices
The lineup of Crosser tillers is very extensive, therefore, to evaluate the quality of equipment, it is best to provide some technical data on the units. This will help not only compare them with each other, but also with Russian counterparts, but also greatly simplify the issue of choosing the right tiller.
the Crosser CRM1 tiller is capable of processing land holdings of up to 70 acres. The cost of this unit is about 39 thousand rubles, which is quite democratic for our country.
Specifications Crosser CRM1:
- type of motor used. 4-stroke, on gasoline;
- maximum power. 6.5 hp;
- engine displacement. 196 cm3;
- transfers. two forward and two back;
- digging depth. 145 mm;
- total weight. 82 kg;
- fuel tank capacity. 5 l;
- width of the processed strip. up to 900 mm;
- unit length. 140 cm;
- unit width. 68 cm;
- unit height. 107 cm.
CRM11
Specifications Crosser CRM11:
- type of motor used. 4-stroke, on gasoline;
- maximum power. 6.5 hp;
- engine displacement. 270 cm3;
- transfers. two forward and one back;
- digging depth. 300 mm;
- total weight. 125 kg;
- fuel tank capacity. 5 l;
- width of the processed strip. up to 1250 mm;
- unit length. 139 cm;
- unit width. 80 cm;
- unit height. 107 cm.
CRM12e
Specifications and full review of the Crosser CRM12e:
- type of motor used. 4-stroke, diesel;
- diesel tiller crossover has a capacity of 12 l with
- engine displacement. 820 cm3;
- gears. six forward and two back;
- digging depth. 190 mm;
- total weight. 300 kg;
- fuel tank capacity. 5 l;
- width of the processed strip. up to 800 mm;
- unit length. 218 cm;
- unit width. 89 cm;
- unit height. 125 cm.
The price of the tiller Crossover M12e will be in the price range from 93 to 97 thousand rubles.
Specifications Crosser CRM2:
- type of motor used. 4-stroke, on gasoline;
- maximum power. 6.5 hp;
- engine displacement. 196 cm3;
- transfers. two forward and one back;
- digging depth. 250 mm;
- total weight. 82 kg;
- fuel tank capacity. 5 l;
- width of the processed strip. up to 730 mm;
- unit length. 150 cm;
- unit width. 40 cm;
- unit height. 90 cm.
Specifications Crosser CRM5:
- type of motor used. 4-stroke, on gasoline;
- maximum power. 6.5 hp;
- engine displacement. 198 cm3;
- transfers. two forward and one back;
- digging depth. 300 mm;
- total weight. 84 kg;
- fuel tank capacity. 3.6 l;
- width of the processed strip. up to 1050 mm;
- unit length. 174 cm;
- unit width. 105 cm;
- unit height. 98 cm.
The price of the tiller Crossover M5 reaches, on average, up to 30 thousand rubles for a new model.
Specifications Crosser CRM6:
- type of motor used. 4-stroke, on gasoline;
- maximum power. 6 hp.;
- engine displacement. 296 cm3;
- transfers. two forward and one back;
- digging depth. 300 mm;
- total weight. 100 kg;
- fuel tank capacity. 3.6 l;
- width of the processed strip. up to 1050 mm;
- unit length. 174 cm;
- unit width. 65 cm;
- unit height. 130 cm.
This tiller will cost about 46 thousand rubles. As for the Killer m6 diesel engine tiller, its price will be slightly lower and will amount to 42 thousand rubles.
Video: How To Adjust Ignition Trimmer Huter Video
Specifications Crosser CRM8:
- type of motor used. 4-stroke, diesel;
- maximum power. 8 hp.;
- engine displacement. 573 cm3;
- gears. six forward and two back;
- digging depth. 180 mm;
- total weight. 230 kg;
- fuel tank capacity. 5.5 l;
- width of the processed strip. up to 750 mm;
- unit length. 217 cm;
- unit width. 84.5 cm;
- unit height. 115 cm.
On average, the price of such a unit reaches 70 thousand rubles, depending on the region of sale.
The Crosser CRM9 diesel tiller has very good cross-country performance, which makes it possible to work even on the most difficult areas of the earth.
Specifications Crosser CRM9:
- type of motor used. 4-stroke, diesel;
- maximum power. 8.9 hp.;
- engine displacement. 406 cm3;
- transfers. two forward and one back;
- digging depth. 300 mm;
- total weight. 140 kg;
- fuel tank capacity. 5.5 l;
- width of the processed strip. up to 1050 mm;
- unit length. 180 cm;
- unit width. 135 cm;
- unit height. 110 cm.
The cost of this unit is about 67 thousand rubles in various regions of Russia.
CRM10e
The Crosser CRM10e heavy diesel tiller can carry out almost the entire range of agricultural and transportation work.
Specifications Crosser CRM10e:
- type of motor used. 4-stroke, diesel;
- maximum power. 9.5 hp.;
- engine displacement. 573 cm3;
- gears. six forward and two back;
- digging depth. 180 mm;
- total weight. 230 kg;
- fuel tank capacity. 5.5 l;
- width of the processed strip. up to 800 mm;
- unit length. 217 cm;
- unit width. 84.5 cm;
- unit height. 115 cm.
The price of the tiller Crossover M10 can reach 124 thousand rubles.
Assembly instruction
The assembly instruction for the Crosser tiller, regardless of their specificity and technical characteristics, is almost identical. Therefore, we will describe the assembly process on the basis of one model. the Tiller Crosser M8. Like other units, it is supplied disassembled.
The whole algorithm of actions can be described thesisally:
- At the initial stage, it is necessary to fix a frame equipped with a special footrest. This will be the basis for installing the complete engine on it.
- Screw the mounting studs into the corresponding holes.
- After all the connections are fixed, we install a pair of wheels on the pins located on the sides of the frame. It is worth noting that the assembly is best done together, because the weight of the unit is quite large.
- The diesel engine itself is equipped with water cooling, and its weight reaches 80 kg. There are special fastenings for the crane on it, so that it is convenient to move it. In principle, you can not use the means of small-scale mechanization.
- We install the engine in an appropriate place on the frame, as shown in the instructions. Tighten all bolts tightly so that during operation avoid unnecessary vibration.
- We check the controls. Install and tighten the transmission belts.
- We adjust the gas cable.
- After the unit has been assembled, you can pour oil for diesel engines. It must be poured into the crankcase of the fuel tank. We fill the rear tank with coolant, and pour diesel into the front tank.
- We turn out the pain of the fuel supply hose, and then open the fuel valve to release excess air from the fuel system.
- Set the throttle to the "Start" position.
- We squeeze the decompression lever and rotate the engine start lever until the pressure sensor rises.
- Release the lever and remove the handle. If the lever does not start, then you need to repeat these steps.
In principle, this will be the answer to the question. how to assemble a Crosser tiller? It is also worth noting that the assembly process must be carried out in the room where the unit itself will be stored. The fact is that the assembled tiller is quite large, so rolling it out will be quite problematic.
Spare parts
On the Internet you can find enough sites offering certain spare parts for the Cayman, Patriot, Texas, Foreman, Viking, Forza tillers, including spare parts and equipment for the Crosser tiller.
Among them you can meet:
- camshaft;
- fuel pump;
- radiator;
- fuel tank mounting bracket;
- cylinder head for tiller Crosser M8;
- generator;
- air filter;
- wheels for tiller Crosser, etc.
As we can see, the offer is quite wide, so there is simply no problem of searching for a part or component.
For violators of car parking, penalties are provided, one of which is the evacuation of a vehicle. By following the link you will find out what to do if your car has been picked up by a tow truck.
Traditionally, one of the most time-consuming and long tasks is the process of sowing various crops. The garlic seeder for your site is simple, convenient and effective.
Snowmobile is a very functional and practical means of transportation on winter terrain. It’s all about the Polaris snowmobile.
In addition, you can purchase spare parts for Crosser tillers, the official website of which is located at www.crosser-tools.ru, in the company CROSSER Instrument, which is the official dealer of the company.
Separately, it is worth mentioning the attachment for Crosser tillers. Their use together with this unit allows you to significantly expand the scope of work that the tiller is capable of. In particular, the attachment for Tiller Crossers M5 includes several devices:
- potato diggers;
- dumps;
- snow blowers;
- trailers, trolleys, etc.
By the way, many are interested in the question. how to make a trailer for the Crosser tiller with your own hands? This is a doable business, because there are enough drawings on the Internet indicating the exact parameters and sizes. In general, the trailer consists of several components. wheels, carrier, frame and the body itself.
Consider the sample process of the entire assembly:
- At the initial stage, we make a frame. To do this, we need steel pipes with a rectangular and circular cross-section, as well as corners and a bar. You can weld the structure in the form of a rectangle with 8 ribs, in the middle of each face you also need to weld the tube so that the structure is more stable.
- The wheels should be located on the wheel axis, which will also be played by a steel pipe, the diameter of which will be about 3 cm. The length of the future wheel axis should be 107 cm.
This assembly process is quite sketchy, because the parameters are indicated quite approximately. In any case, finding video assemblies and drawings is pretty straightforward.
Conclusion
Crosser tillers show pretty good performance, even those models that belong to the budget category. Of course, there are semi-professional units, but they are intended mainly for large farm kits and farms.
As you can see, the prices for Crosser tilleries are very diverse, so everyone can make their choice. Have you heard that the Tiller Crossover is only pretty heavy at work? Nothing like this. This is the best type of working device that will fully satisfy your expectations. financial and working.
Of course, budget models can not be compared with the heavy diesel tiller Zubr and Dobrynya. But given that the average price range starts at 25 thousand for a new model of a budget tiller, we can say that for Russia this is a rather optimal agricultural machinery.