How to clean a muffler of a trimmer for grass from a carbon. How to clean a muffler of a lawn mower

Cleaning a muffler of a trimmer for Echo grass

The same symptoms on Khusk 128th. It was decided by replacing the candle. There was a wild nagar on his native.

The same symptoms on Khusk 128th. It was decided by replacing the candle. There was a wild nagar on his native.

And there is a motorized run at times less. Therefore, at least 20 years can be a candle, but no more than a thousand hours of developing there for a refusal, you take Beng, you lower the candle in it without soaking the insulator. The next morning, rinse under the tap and in your hands a new candle. We look at the lambs on ceramics and the integrity of the electrode. If everything is normal, we adjust the gap and the sagging further to operate

STIHL trimmer for 12 years and during all this time only gasoline was poured and air filter was washed. Even a candle is a native. But here recently, literally within fifteen minutes, the power began to drop sharply and the engine began to work only on idle. I thought the carburetor, but having splashed the cleaner into the air, nothing has changed. I figured out the engine, and everything is perfect there. the oil seals are tightly sitting on the shaft and the cylinder mirror is ideal and there is not even a noticeable to the eye (12 years, the intensity of two houses with large areas plus shabashki near the grannies). Okay, I think let me start without a gulshik, herak takes a frantic momentum. It became clear here that the muffler was fired. I soaked it for the night in White Spick, but this did not give the results, then I burned it at the stake and the Dvig began to work well, but not great like this harsh rash before. Mows well, but before it was better. I understand that the best is the enemy of good, but there may be a radical way to clean the silencer to a state of almost new?

There is a radical way to clean the muffler

Cleaner of drains, pipes, Mr. Tyrette or how it is there, fill it with tuda and he burns everything

Here, not long ago, the anti.polyiman recipe advised that the oil should be interfered with 1k25

I dilute 1:50 by my native oil stihl. During the season, a liter bottle and 50 liters of benzs are spent. There are no grids in Glushak, but it is heavy, then the Nagar there is wow there.Karapuz is, and what to change it, the small, the lung works flawlessly, does not ask for spare parts. I’ll look, if you do not clean it, then I will buy him a new Glushak, I have earned it in 12 years.

The neighbor was the same, bought at the same time, mows smaller and more often, but also not a little and also still only Benz pours. Non.precious thing. You can mow with one hand, you can mow how much it will fit in a day and do not get tired. Model FS 45.

Here, not long ago, the anti.polyiman recipe advised that the oil should be interfered with 1k25

I dilute 1:50 by my native oil stihl. During the season, a liter bottle and 50 liters of benzs are spent. There are no grids in Glushak, but it is heavy, then the Nagar there is wow there.Karapuz is, and what to change it, the small, the lung works flawlessly, does not ask for spare parts. I’ll look, if you do not clean it, then I will buy him a new Glushak, I have earned it in 12 years.

The neighbor was the same, bought at the same time, mows smaller and more often, but also not a little and also still only Benz pours. Non.precious thing. You can mow with one hand, you can mow how much it will fit in a day and do not get tired. Model FS 45.

T.e. You are one of those alena who are not familiar with arithmetic and believe that 1:50 is 1l 50ml oil? And where did you get there, it’s not clear at all.

REPAIR of the chainsaw. The muffler cleaning

Sooner or later with a malfunction of this node, almost every chainsaw owner may collide. Units will be exceptions. As you know, two.stroke internal combustion engines are installed on most gasoline chain saws. Accordingly, the muffler is intended for the removal of exhaust gases, reducing noise from engine operation, as well as to protect against ignition. Not only the condition of the engine, but also the effectiveness of its operation depends on how quickly and unhindered the muffler depends on the muffler. At the same time, in the process of combustion of the fuel mixture, a large number of particles in the exhaust are formed, which settled on the muffler, clogging it over time. Below. about what to do with this, and what the appearance of a large number of soil is talking about.

Most manufacturers recommend cleaning the muffler outside without removing it, once every 150 hours of saw. Nevertheless, depending on the state of the saw and compliance with operating conditions, the need for such a procedure may arise both before and much later than this period. What symptoms will tell us that it’s time to clean the muffler?

• The engine is poorly started (given that the properly prepared fuel mixture is flooded, the spark plug and the air filter are working), one of the reasons is the clogged muffler.
• The chainsaws are normally starting, but “zabulak” with an increase in speed.
• The presence of a visible soot on the exhaust opening.
• If you removed the silencer, try to blow it, the air must pass through and through, if not, cleaning is necessary.

How to clean a silencer on a scooter: get acquainted with different methods

Cleaning the exhaust pipe on a scooter will not take much time, because, compared to the car, the fuel muffler is not so big. If you do not know how to clean a finger of a scooter, these are a few main cleaning methods.

You already know how to clean the muffler on a scooter, and you are sure that this task does not require much time and effort. But in any case, this cannot be neglected, since untimely cleaner cleaning can lead to very unpleasant consequences.

Firstly, cleaning. This is a way to increase the engine power, which will constantly fall with an increase in the layer of soot. Not only does your scooter go very slowly with a dirty muffler, it will also consume a lot of fuel.

Secondly, non-surgical removal of exhaust gases from the combustion chamber is also dangerous, as it leads to excessive heating of the scooter, parts of which begin to wear out quickly. Of course, sooner or later you will not be able to start a scooter with a clogged muffler, and when you finally decide to start cleaning the exhaust pipe, it turns out that in addition to this you need to start repairing the engine.

Therefore, the procedure for cleaning the exhaust of the scooter should be a regular procedure for each owner of such a simple car. How can you be sure that this will not take much time, but thus you can protect yourself from unforeseen engine repair costs.

Mechanical

The most radical and at the same time the most time.consuming method that gives the best results is the cutting and removal of carbon deposits using various scrapers and tools and subsequent welding. In this case, you need to know the internal structure of the system.

Carbon deposits are easier to remove. You need to take a piece of the cable of the desired length, squeeze one end into the pipe of the electric drill, and then drive it and gradually move inside, turning the cable with a drill at low speed. In some cases, a positive result is obtained.

Ignition

So, if there are problems with the fact that the tool does not start or stalls immediately after the start of work, first you need to pay attention to the state of the ignition system. Try to turn out the candle and inspect it. In the case when the device is completely dry, something probably happened with the supply of the fuel mixture.

How to clean the muffler on the trimmer Husqvarna 128 r. very often the problem of power loss lies on the surface.

Muffler Motokos Dnipro-M BT-430

Determining the cause of oil leakage under the silencer Motokos Dnipro-M BT-430.

The candle is wet? Fully “thrown” with gasoline-oil mixture? Your gasoline trimmer for the grass, the repair of which we are trying to describe, has problems with carburetor adjustments. This often happens when non.specialists tried. If you have no experience, we strongly advise you to contact the service center, since you can well burn the entire piston system with your actions.

However, not everything is so bad: if you violate the rules of cold launch, trying to pump up the fuel mixture all the time, then this can easily lead to throwing.

It is another matter when the candle is covered with a thick layer of black car. In this case, the gasoline trimmer for the grass, the repair of which we describe, exposed to poor.quality fuel mixture. Maybe the matter is again in the wrong adjustment of the carburetor, which gives out too rich the fuel mixture. Just replace the candle.

Muffler Motokos Dnipro-M BT-430

Determining the cause of oil leakage under the silencer Motokos Dnipro-M BT-430.

The candle is wet? Fully “thrown” with gasoline-oil mixture? Your gasoline trimmer for the grass, the repair of which we are trying to describe, has problems with carburetor adjustments. This often happens when non.specialists tried. If you have no experience, we strongly advise you to contact the service center, since you can well burn the entire piston system with your actions.

However, not everything is so bad: if you violate the rules of cold launch, trying to pump up the fuel mixture all the time, then this can easily lead to throwing.

It is another matter when the candle is covered with a thick layer of black car. In this case, the gasoline trimmer for the grass, the repair of which we describe, exposed to poor.quality fuel mixture. Maybe the matter is again in the wrong adjustment of the carburetor, which gives out too rich the fuel mixture. Just replace the candle.

Fuel supply

Often, the absence of gasoline entry into the combustion chamber is explained by the fact that a lot of dirt has accumulated in the gas tank, which simply clogged the feed hose. Why are there a moment. Clean the muffler and mesh on how to. Disconnect the fuel hose. If fuel does not flow from it, then the clogged fuel filter or a saopan is to blame. The latter can be cleaned with a needle, and the first is advisable to completely change every three months.

Among other things, the repair of gasoline trimmers “Patriot” often requires replacement and air filter. How to clean the muffler on the Husqvarna 128 r trimmer, very often the problem of power loss lies on the surface and people without knowing it are trying to change the carburetor. Being clogged, it prevents the formation of a normally enriched fuel mixture.

And one more thing: often a muffler clogged by a carbon monoxide is to blame for everything. It needs to be dismantled, washed in kerosene or burned on a burner. This is especially often done by those for whom the repair of gasoline trimmers “Husqvarna” is everyday work.

Why does not rotate the chainsaw and does not stagger

If the saw cannot rotate or delayed when pressing gas, this is most likely not caused by a leakage of a carburetor or crankcase. This is solved by checking for tightness and adjusting the carburetor.

In addition, this malfunction can be associated with a fuel tank fan malfunction. Due to the formation of a vacuum in the fuel tank during the operation of the chainsaw, the necessary volume of the fuel mixture does not enter the engine, which makes it incapable of acceleration or stagnation.

Another possible reason that the chainsaws are not capable of gaining momentum, there may be an excess of soot in the muffler, which complicates the exhaust, which reduces the power and speed of the engine.

The main causes of the gasopyle damage

Despite the fact that chainsaws are a simple device, from time to time problems arise in its work, which can only be eliminated by disassembly. The following malfunctions can be given as an example:

• the chainsaw does not rotate;
• a chainsaw ceases to function in the context;
• the chainsaw is launched and stopped;
• Basopile loses its strength;
• clicking on a chainsaw when pressed.

Most often, malfunctions are associated with engine malfunctions, as well as with malfunctions of other systems and nodes. Proper processing of this technique is important. Subject to all the rules for using the problem with high probability are the most obvious. It is advisable to start a search for the causes of malfunctions by checking the simplest part of the chainsaw and ending with the most difficult.

The main causes of the gasopyle damage

Despite the fact that chainsaws are a simple device, from time to time problems arise in its work, which can only be eliminated by disassembly. The following malfunctions can be given as an example:

• the chainsaw does not rotate;
• a chainsaw ceases to function in the context;
• the chainsaw is launched and stopped;
• Basopile loses its strength;
• clicking on a chainsaw when pressed.

Most often, malfunctions are associated with engine malfunctions, as well as with malfunctions of other systems and nodes. Proper processing of this technique is important. Subject to all the rules for using the problem with high probability are the most obvious. It is advisable to start a search for the causes of malfunctions by checking the simplest part of the chainsaw and ending with the most difficult.

Why the chainsaw is poorly started and forgotten

Poor launch of equipment in the cold can lead to insufficient compression, that is, the rings wear out for a long service life and require replacement. Sometimes the reason for the poor starting of the engine in the absence of heating is a muffler problem and poor contact between the spark plug and the wire.

Bad launch can also be caused by wear or damage to the rubber cuff laying in an accelerator carburetor pump, which causes an additional air flow, which leads to an increase in the rotation of the saw.

Shina care

This crap is always forgotten to lubricate every few hours of work, it is necessary to rearrange the bus at 180 ° so that both sides are produced, and approximately the same.

Also, every time when refueling the tank, it is necessary to lubricate the tire award so that it serves for a long time and normal, for which special syringes are sold in almost all stores to lubricate the stars. The only manufacturer who solved this issue is Stihl with his EMATIC system

It is often possible to hear advice that when forming the guides of the “dented groove”, align it with a file, however, if the normal tire does not rush. over, if you can’t withstand the perfect right angle between the file and the tire, then the “corrected” tire will last even less, since during operation the chain will stagger in the runners and break them even stronger.

How to clean a muffler of a lawn mower

During the operation of such an instrument as a chainsaw, its owner often encounters a number of troubles, one of which is a clogging of a carburetor. This can happen if the chainsaw is seasoned with low gasoline or a third.party garbage falls into the fuel tank. In order to clean the carburetor of the chainsaw, you must first disassemble it.

We clean correctly

• Cross,
• Wrenches with heads of various sizes,
• Special cleaning composition, cleaning fabric,
• Ultrasonic cleaner.

A set of tools can be seen in the photo.

Cleaning the carburetor of the chainsaw should be created according to the subsequent method:

• First you need to drain the remaining fuel from the fuel tank. Remove the chainsaw lid, unscrewing the fasteners. We take out the filter and disassemble the case by removing the nuts and the latches as needed.
• Remove the fuel consistency supply hose from its latch, unscrew the fasteners of the upper carburetor cover. Then we remove the top cover and blue gasket. this is a membrane of the fuel pump. Spring brackets are placed to the left of the body, remove them, and then the screws. It is better to sign the details and schematically fix the places from which they were removed so as not to confuse anything at the time of assembly.
• Remove the bottom cover of the carburetor, unscrew the screw and remove the needle valve and a spring under it. Then with longitudinal effort we remove the air damper and its axis.
• Remove the throttle shutter, drive lever and throttle axis.
• We lay out all the removed parts of the carburetor on an even surface and conduct an inspection for maintaining integrity. Parts with the highest degree of wear should be changed with new.
• With the help of a special cleaning agent, wash the parts and dry with a smoker rag. Tubes need to be blown under pressure using a pump.
• For the merit of the greatest effect, clean the carburetor on the stihl-so-can chainsaw with a special bath bath, in the base of which lies the cavitation effect. The bath is filled with diesel fuel, the parts of the carburetor are plunged into it for a couple of minutes. At the end we dry the details with the pump.

Muffler Motokos Dnipro-M BT-430

Determining the premise of oil leakage under the silencer Motokos Dnipro-M BT-430.

Husqvarna 128r Cleaner Cleaner.

on the trimmer Husqvarna 128 r. Very often a non.disorder of power lies on the surface

A detailed video with the cleaning process will help to correctly perform work.

After all the products are dried, you need to assemble a carburetor. Usually a detergent one hundred percent evaporates per day. It is better to wait a day after cleaning, since the remnants of detergents on the details can get into the fuel compartment, and when combustible they will allocate toxic gases.

Another fundamental aspect associated with disassembling the chainsaw is that you need to very accurately install and configure the needle valve petal, the chainsaw may not start on the other. To check the correctness of the installation of the petal, you can use the blade. Having installed it from above, we watch how the petal spins freely. If the trouble does not appear, it means everything is in order. you can continue the assembly. If the obstacles of the stroke still appear, then the petal must either press or bend the edge on it.

How to clean a chainsaw filter

To clean the filter of the chainsaw of Husqvarna is necessary after each implementation. The process of cleaning itself depends on how the filter is polluted can be made with 2 methods:

• Mechanical cleaning method, which is a blowing of the filter.
• With a higher degree of pollution, the filter is washed in soapy water.

Fundamentally! It is forbidden to rinse the filter in brutal mixtures: gasoline, diesel fuel, acetone.

How to clean a muffler on a chainsaw

Timely measures to clean the muffler of the chainsaw can seriously extend the life of the tool. There are several circumstances of pollutant pollution:

To check the condition of the muffler, it is necessary to dismantle it and look inside. If you need to remove the muffler on the stihl chainsaw

, It is necessary to remove the muffler fastener, the muffler itself, the plate and the reflector.

If you find a carrier inside the silencer, then this problem is solved in two ways:

• Mechanical method (cleaning is carried out using brushes, sandpaper and special tools). This path is possible if the muffler understands.
• In the case of a non.devastated muffler, special cleaning compositions are used, in which the muffler is soaked for several hours.

Correctly performing all the actions, you can easily clean the chainsaw, extend the life of the tool and protect yourself during operation.

Cleaning the exhaust system from soils

The device of two.stroke engines compared to four.stroke is much easier. But you need to pay for simplicity, and part of this board goes to the exhaust system 🙂 since the oil in 2-stroke engines is mixed with gasoline, the fuel mixture burns after it leaves the soil in the combustion chamber and the exhaust system. High.quality oil leaves a minimum of such soils, but not quite high quality quite a lot. An even increased deposition of the carbon felts is facilitated not by the tightness of the inventor, the air filter, which leads to dust and dirt in the cylinder. over, this is how all this dirt accelerates the wear of the piston system. Therefore, if you have found a lot of deposits in the exhaust system, then after cleaning it, check the air filter and connect it to the carburetor.

If you feel that the power and maximum turns of your scooter began to fall, the carburetor began to rich, it is not necessary to change the piston and twist the carb, check the exhaust system. To get started, remove the exhaust pipe. With the fastening, figure out in place, since different scooters have different things. Try to get without a silencer and drive, if you are not afraid :)) If the power has increased markedly, then the muffler is clogged. Although it is not a fact that with a shot by a motorller’s scored muffler it will immediately go well. He may not have enough fuel and he will not go normally at all. In two.stroke engines, any changes in the intake and release system can greatly affect the engine operation. Look into that hole of the exhaust pipe where the exhaust from the cylinder enters. If there is a fog there, remove it, you can use a sharp large screwdriver. Then blow in this hole (yes, yes, blow! Only wipe everything with a rag, and preferably through gauze). The muffler must be blown up without much effort. If you are redder from the tenses of the lungs or is quite difficult. The muffler is clogged and you are very unlucky: o) Clean his business difficult. You can try to open (the most effective method, but also the most difficult), clean and burn everything with a soldering lamp. But in this case, you will ruin a little appearance, not everyone will go for it. Yes, and the muffler will have to be re.painted. Do not try to remove any partitions in the disassembled muffler and do modifications. It is unlikely that the engine will give out great power, rather, on the contrary, and the volume of the exhaust in this case will increase. The entire system from the formation and supply of the fuel mixture to the combustion chamber and before the release of the exhaust gases through the exhaust pipe is strongly tied with each other. Any spontaneous and rash changes in it lead to power loss. As an option, try the removed silencer well spread it with a soldering lamp, almost to red, then carefully skip it with a rather heavy wooden hammer and gradually wipe all the dirt out of it. But this is not a very effective way. Disassembling mufflers after such an operation showed. Foreths often remains defamed in the tubes between partitions and that fell into large pieces of ash in intermediate chambers. And the carpet in the tubes and creates resistance. After such an operation, in order to bring the muffler into the “presentation”, it will also have to be painted again.

You can try a chemical cleaning method. The muffler first is well torn well with a soldering lamp until all the remnants of oil and gasoline are burned out of it. In a word, smoke and fire should stop from the holes. Then we run around with a hammer, wipe everything that fell inside. We buy chemical for cleaning deposits in teapots (and larger). You can try to use citric acid. Dilute with hot water. Twine one of the two holes of the muffler and fill it out and fill in the prepared solution. Put so that the water does not flow and grant the muffler with a soldering lamp. Water in it will boil. It is necessary to boil longer. Then cool, shake well and drain everything that was flooded. Repeat again first. A long process, but can bring a good result without cutting the exhaust pipe.

The next step. We check for the presence of soils the exhaust window in the cylinder. In this case, the cylinder must be removed. Unscrew the protective casing from the cylinder, unscrew the candle and close the remaining hole with a clean rag. Unscrew four bolts, take them out and remove the cylinder head and aluminum gasket. Check the presence of deposits on the head and on the piston. If there is something and there, then you need to clean them and preferably polish them. Then carefully remove the cylinder and close the cavity of the shaft with a clean rag. We look at the exhaust window. If it is clogged, carefully clean it with a screwdriver or something suitable, while performing this operation, do not scratch the cylinder mirror! When the cleaning is finished, wash the cylinder in gasoline and wipe with a dry rag. We collect in the reverse sequence lubricating the abundantly cylinder, rings and piston oil. If the gasket between the cylinder and the crankcase was spoiled, cut out a new one of paranite or paper of the same thickness, lubricate with a very thin layer of sealant or solidol and install. Cylinder, piston and rings when installed, grease with oil. In some cases, after such operations, the owners cannot recognize their scout, it starts to work so well and much less to eat fuel! Perhaps after cleaning, you will have to adjust the carburetor.

On the features of the care of a benzotrimer

Since the gasoline braid for grass is usually simple in the device, the care process is not difficult. Using the further recommendations, you can avoid serious breakdowns of the mechanism and the failure of the motorcycle.

Proper filling and fuel composition for benzotrimer

For gasoline models (for example, Krüger benzotrimmer, the Patriot Pt benzotrimer are especially sensitive to the point in question) must be poured out the correctly composed mixture. Gasoline 92 (for more expensive options for the 95th gasoline) and oil for a two-stroke engine-such a mixture must be prepared for filling a trimmer for grass in a tank.

The ratio of oil and fuel is 1:50. Such parts provide better lubrication of internal mechanisms and complete combustion of gasoline in the engine of braids for grass.

Experts consider the preparation of the fuel mixture an important recommendation immediately before starting work. It is not recommended to store a pre.prepared composition

And if he remained in the tank of the benzotrimmer after the end of the mowing, then it is better to drain it into a polymer tightly closed container.

Gearal care

Checking the level of lithola in the gearbox is also an important moment in the balanced work of motorcycles. The moment will save the engine and quality of the mowing.

It will also be necessary to periodically clean the angular gearbox itself.

Correct choice: a fishing line for a trimmer or a disk?

Almost everyone who has the experience of mowing grass using any model of a trimmer for grass understands that the fishing line for a trimmer is used for mowing low and not too hard herbs. And the iron disk is for higher, hard grass and even young shrubs. Compliance with that rule will prevent engine overheating. And also allow you to get high quality mowing.

Sharpening of the disk and knife

Since all cutting tools need regular sharpening, and the knives in the benzotrimer will need to sharpen. Such a simple action will make it possible to get high quality mowing.

For sharpening, a file or rashpil is used. It is necessary to clearly observe the corners of the cutting parts of the knife or disk. This angle depends on the brand of the trimmer for the grass. Bilateral options for knives should be turned over 180 ° when sharpening. And in the process of work it is necessary to try to wear a disk or knife as evenly as possible.

Lack of sharpening of knives or irregularity will lead to the rapid wear of the tool. This is due to the overload of the engine. After all, the knife will not be able to “defeat” complex grass or shrubs, and for their mowing a large engine power will be required. And this largely reduces the Benzotrommer motorcycle resource.

Spool for fishing line: What you should know

Prerequisite: use only fishing line for nobility. The use of metal cables and wires is strictly prohibited. This spoils the mechanism and can ruin the engine.

The diameter of the fishing line should be in strict accordance with the instructions that are prescribed by the manufacturer. Excessively thick fishing line for a trimmer is more effective. However, it overloads the engine largely, increasing the load on it. Especially if such a diameter is not provided by the manufacturer. The process of winding on the bobbin of the fishing line is carried out as tightly as possible, in the direction indicated in the instructions.

Cleaning from garbage and dirt

The mowing head in the process is polluted in the most. It should be regularly cleaned of grass and garbage. Ideally, clean all motorcycles after each time for the mowing. This will retain its appearance and the working part.

To cleanse, you can use a stream from a hose. Sufficient pressure will allow you to bring down most of the contaminants, make it possible when the subsequent use of the benzotrimer does not get dirty during preparatory work. After the washing work of the body, the motorcycles are recommended to dry. Such actions are important to preserve the engine, the full operation of the candles and the carburetor. And also warn the risk of rust on the metal parts of a trimmer for grass.

Trimmer fishing line also has its secrets

A fishing line for a trimmer is wound on a spool inside the coil, and its ends are exhibited out. When the spool is spent, and the fishing line for the trimmer, while rotation, cuts the grass. To release the ends, you need to lightly hit the ground on the ground (system-semiautomatic device), there are coils-machines that have a fishing line for a trimmer itself produced. When working with fishing line, there are also several rules:

So as not to damage the fishing line for the trimmer and the coil. Try not to touch the reel and fishing line of various solid materials. paths, borders, fences. From this fishing line for a trimmer is prematurely shortened, a coil may be damaged or even jam the engine. Spool with a fishing line should also not touch the ground.

Mow with ends. this is more efficient. If you download the entire length of the fishing line, you can overload the engine. In addition, this reduces the efficiency of the mowing. The tool must be kept so that it mowed only the tips of the fishing line. To do this, tilt it forward. towards the mowing.

High grass requires several mowing. If the grass is above 20 centimeters, then one mowing will not cost here. Need to mow two or three times, from top to bottom. This is done so that the grass is not wound on the coil. Winnered grass is secured engine overheating. If the grass is still wound, you need to stop the tool and clean it.

The fishing line for the trimmer ran away and hid in the reel. This option happens when you work if you did not release a fishing line for a trimmer from a coil in time. After all, a fishing line for a trimmer when running is erased and shortened. If you did not have time to release it, then stop the engine, turn off the tool from the network, and then disassemble the rogue and pass the ends of the fishing line into the right holes.

What depends on the consumption of the fishing line? It must be remembered that the fishing line for a trimmer wear out faster if the grass is hard. Therefore, it is necessary to let it out more often when weeds and dry hard herbs are spent. Around the foundation of the house, near the wall and border, the fishing line will also be larger than directly on the lawn or near the trees. It is worth considering: if you work carefully and accurately, then the consumption of a trimmer fishing line will be optimal and economical.