Replacement instructions. How to insert fishing line
It should be noted that the reels in mowers can be different:
- For functioning with one tendril;
- For functioning with two tendrils;
- The line must be threaded through a through hole located inside the element.
B do not confuse this part with an extension cord for a lawn mower on a reel, because despite the similar name, these are two completely different elements.
This article will tell you about how much the ZIL 130 dump truck weighs and what this transport is capable of.
Read here //machinspec.com/lesozagotovitelnaya/benzopila/stanok-dlya-zatochki.html how to assemble a machine for sharpening chainsaws with your own hands quickly and easily.
In the first option, winding the cutting element is very simple:
- There is a locking tab on the inside of the spool element.
- One whining tendril is inserted into it.
- It is necessary to thread the nylon thread in the direction opposite to the rotation of the spool element.
- You will need only 2 to 4 meters of fishing line. When the winding process is completed, put the small end of this cutting element outward and fix it in the groove, which is necessary for fixing the fishing line so that it does not unwind during the operation of the mower.
- If there is a special groove, then the end should be held by hand so that the cutting element does NOT unwind during further assembly of the element.
- At the last stage, it is necessary to thread the outer end of the thread into a special hole located on the outer part of the element. The spool can then be inserted into the mower.
When the roller is working with both ends of the plastic filament, then the following steps must be taken to thread the line into the mower:
- Inside, on the spool, you will see how many recesses there are for winding (two or one). If the groove is equal, then both ends of the thread will be guided through this groove. If there are two of them, then the antennae are laid out separately. Each in its own notch.
- It is necessary to unwind from 2 to 4 meters of polyethylene thread and thread its two ends into the hole.
- Wind both threads in the same direction, opposite the rotation of the drum.
- When all the line is wound, the ends should be fixed in the grooves or held by hand.
- Both ends are threaded into the eyelet from the outside of the roller housing.
- The drum is then collected and inserted into the mower.
Tips and steps for replacing the line with.
The spool element or roller may have a completely different design from the previous two options. The line can be threaded through the eyelet, which is through and located inside the spool. In this case, it is not necessary to disassemble the roller drum and manually wind the polyethylene thread.
The polyethylene thread is threaded through the hole and rotated by pressing a special button. This button is located on the body and is intended for the operation of the equipment so that it is possible to release the line as it wears out.
Mower line device
The device of the element on which the nylon thread is wound is very simple. This element is called a coil. It has two “track”. Top and bottom. There is a special partition with a recess between these tracks. A fishing line is wound on these tracks. It must first be pulled through the recesses.
Features of replacing the fishing line with.
Safety engineering
To quickly and safely change the line on the reel of the mower, you must observe safety precautions. Before removing the reel to rewind the line on the mower, the technician must be disconnected from the power supply (if the mower is powered by electricity). Here I would like to mention the rating of electric lawn mowers in terms of reliability, which will help you choose a safe helper.
Another important safety rule that must be observed. This is pressing the lock button. You can find out its location on the vehicle body using the operating manual. For example, you can find the operating instructions for the manual petrol lawn mower here.
Do not forget that the cutting element needs to be adjusted. There is an adjustment button on the body of the unit. If the process does NOT start automatically and the thread tension has been released, then the button is clamped and the fishing line is pulled out of the spool with force.
See instructions.
Which line to choose to refuel lawn mowers
The thickness of the polyethylene thread depends on the model of equipment and varies from 1.2 to 4 mm. She may be:
- With a round section. It is the most durable material for mowing grassy plants;
- With a curly section. Used for mowing soft plants;
- Twisted. Suitable for thin grass;
- Professional type, not suitable for all vehicle models.
To change the line for lawn mowers, you need to purchase a cutting thread that will be ideal for one or another type of mower.
How to fill a line in a lawn mower: how to change and load into a reel, how to change and how much to wind into a trimmer
When spring comes, people often spend their free time at their summer cottage. They try to rid their area of problems such as weeds and grass with the onset of warm days. It is difficult to do this manually, especially if the area is very large, so a lawn mower will help. Thanks to this technique, you can trim the grass and remove weeds. This is a suitable device for mowing unnecessary plants near a fence, at home, between rows in a garden on a flower bed, and so on. Read how to choose the right mower for your needs here. The cutting element in this device is a fishing line (strong polyethylene thread), which is wound on a special element. Coil. But over time, the line wears out and it becomes necessary to replace it. The article will talk about how to fill the line in a lawn mower.
Outcome
If you have a summer cottage or a large plot of land near your individual house or cottage, then for the convenience of cleaning grass and weeds, you must use a lawn mower. In case you are thinking of choosing an electric or gasoline lawn mower, then click here and you will find comparative characteristics of different models.
Over time, the line on the mower wears out and needs to be replaced. You can do this yourself. The choice of this polyethylene thread is necessary depending on the model of the mower. It is also worth keeping an eye on the rest of the unit’s details, here, for example, you will find information about Craftsman lawn mower blades, which also wear out and can lead to irreversible consequences.
The device of the reel into which the fishing line is inserted is very simple. But it differs depending on whether the coil works with one or two whine tendrils. It is important to observe safety precautions when changing the line in the reel.
Line selection
In order for the threading of the line into the trimmer head to be successful, it is important NOT to select the consumables. The thicker the cord you tuck in, the thicker and tougher the grass it can cut. Often a universal line is used, the diameter of which is 2 mm. You can choose a diameter suitable for the mower in the following ways:
- Refer to the instructions that came with the trimmers for line thickness information.
- Pay attention to the bobbin itself. Sometimes information about the possible diameters of the fishing line is applied on it.
- Another option. This is to try to insert the cord into the exit hole. If it easily goes through it, then the selected line diameter is suitable for use.
Trimmer reel
You can choose a cord thread according to the type of engine. If the line is too thick, rotation resistance will increase. In this case, the engine will overheat and will soon fail. Helpful hints:
- For an electrical device with a motor less than 500 V, a 1.3 mm thread is suitable. If one is not found, then you can use a 1.6 mm line. If the power is more than 1 kW, then select a cord with a diameter of 2 mm.
- In a gasoline trimmer, the mower shaft matters. For the folded version, a 2 mm cord is often used. If the shaft is straight, then install the thread 2.4-2.5 or 3 mm. The thickest line is installed on powerful devices. From 1.3 kW.
Pay attention to the type of section of the cord thread. Some popular options:
- The most common lines are round. They mow fresh grasses well, but cope worse with shrubs, dead wood.
- Twisted (spiral) cord is NOT very strong, but is good for thin young grass.
- Serrated thread with sharp edges ideal for large weeds in neglected areas.
- You can mow the lawn more evenly with rectangular, star or square trimmer lines, but they are not very durable.
- The most durable. Two-component cord with inner core and round section.
Types of trimmer line
Please note that you cannot use wire, metal strings and cables, as well as ordinary fishing thread instead of fishing line. The device will be dangerous to both the user and others. So the cable or similar products will gradually begin to work, as a result, their ends will unravel, and small pieces will scatter at high speed.
How to fill a line in a lawn mower: how to change and load into a reel, how to change and how much to wind into a trimmer
When spring comes, people often spend their free time at their summer cottage. They try to rid their area of problems such as weeds and grass with the onset of warm days. It is difficult to do this manually, especially if the area is very large, so a lawn mower will help. Thanks to this technique, you can trim the grass and remove weeds. This is a suitable device for mowing unnecessary plants near a fence, at home, between rows in a garden on a flower bed, and so on. Read how to choose the right mower for your needs here. The cutting element in this device is a fishing line (strong polyethylene thread), which is wound on a special element. Coil. But over time, the line wears out and it becomes necessary to replace it. The article will talk about how to fill the line in a lawn mower.
Replacement instructions. How to insert fishing line
It should be noted that the reels in mowers can be different:
- For functioning with one tendril;
- For functioning with two tendrils;
- The line must be threaded through a through hole located inside the element.
B do not confuse this part with an extension cord for a lawn mower on a reel, because despite the similar name, these are two completely different elements.
This article will tell you about how much the ZIL 130 dump truck weighs and what this transport is capable of.
Read here //machinspec.com/lesozagotovitelnaya/benzopila/stanok-dlya-zatochki.html how to assemble a machine for sharpening chainsaws with your own hands quickly and easily.
In the first option, winding the cutting element is very simple:
- There is a locking tab on the inside of the spool element.
- One whining tendril is inserted into it.
- It is necessary to thread the nylon thread in the direction opposite to the rotation of the spool element.
- You will need only 2 to 4 meters of fishing line. When the winding process is completed, put the small end of this cutting element outward and fix it in the groove, which is necessary for fixing the fishing line so that it does not unwind during the operation of the mower.
- If there is a special groove, then the end should be held by hand so that the cutting element does NOT unwind during further assembly of the element.
- At the last stage, it is necessary to thread the outer end of the thread into a special hole located on the outer part of the element. The spool can then be inserted into the mower.
When the roller is working with both ends of the plastic filament, then the following steps must be taken to thread the line into the mower:
- Inside, on the spool, you will see how many recesses there are for winding (two or one). If the groove is equal, then both ends of the thread will be guided through this groove. If there are two of them, then the antennae are laid out separately. Each in its own notch.
- It is necessary to unwind from 2 to 4 meters of polyethylene thread and thread its two ends into the hole.
- Wind both threads in the same direction, opposite the rotation of the drum.
- When all the line is wound, the ends should be fixed in the grooves or held by hand.
- Both ends are threaded into the eyelet from the outside of the roller housing.
- The drum is then collected and inserted into the mower.
Tips and steps for replacing the line with.
The spool element or roller may have a completely different design from the previous two options. The line can be threaded through the eyelet, which is through and located inside the spool. In this case, it is not necessary to disassemble the roller drum and manually wind the polyethylene thread.
The polyethylene thread is threaded through the hole and rotated by pressing a special button. This button is located on the body and is intended for the operation of the equipment so that it is possible to release the line as it wears out.
Removing and disassembling the coil
The mowing trimmer head consists of a cover, a spring (not available in every model), a spool with a cord, a cover. Before proceeding to disassemble the coil of the electrical unit, be sure to disconnect the trimmer from the mains. The disassembly method depends on the attachment of the mowing head. First option:
- To remove the cover that covers the inside of the head, press on the latches (latches) that are located on both sides of the head.
- Remove the cover, under which you will see the spool. Remove it from the case. Some trimmer spools have a spring under the bobbin, which must also be carefully pulled out.
- Soaked in the bobbin, you will see a screw in the center of the case. Unscrew it with a screwdriver.
- After removing the fasteners, take the body of the part and, swing it in different directions, Remove the gearbox from the shaft.
In the second version, the trimmer head is screwed onto the gearbox shaft. To remove it, you need to fix the shaft. For this, such devices have a hole through which a thin screwdriver or metal rod is inserted. Brief instruction:
- Insert a screwdriver into the special hole, then lock the shaft.
- Grasp the body of the head and start twisting it. This should be done clockwise, because the thread on the shaft is left.
Winding the line to the reel
How to wind the line onto the trimmer spool
At first glance, threading a line into the reel of a tool is not easy. But it is enough to study this process carefully. And in the future, all the necessary actions will be performed without any difficulties.
It is worth reading this guide to find out how to tuck the line into the trimmer. The step-by-step instructions given below take into account the peculiarities of the coils of different types of trimmers, therefore, it is applicable to any tool.
So, the procedure is as follows.
- The line spool is the bottom end of the trimmer. First of all, of course, you need to remove this head from the device. To do this, you need to fix the rod (or, in other words, the shaft) on which the coil is attached. It is required to fix it in such a way that it does not scroll. The easiest way to do this is by placing a kind of stupor (preferably metal) between the shaft threads through a special hole. When the shaft is fixed, the spool can be unscrewed.
- At this stage, you have to remove the bobbin from the head, on which the fishing line is attached. To do this, you need to disassemble the head into elements. To do this, you must first find a retainer on its body. It is located on the circumference of the product and is like a button. When the latch is found, you need to press it firmly. Keeping the latch pressed, you must return the head cover clockwise. Then you need to remove the cover and remove the bobbin.
- A tight spring is placed between the bobbin and the head. It needs to be put aside for a while so that it does not interfere with the winding process. Before proceeding with the step of winding the line, it is necessary to inspect the bobbin. If there are remnants of old fishing line on it, they must be removed. When the bobbin is cleaned, you can start preparing a new bobbin.
- Here is a previously prepared skein of new fishing line must be measured and cut off six (maximum. Seven) meters. Keep the bobbin close at hand.
At this point, the key stage actually begins, which this article is devoted to.
Outcome
If you have a summer cottage or a large plot of land near your individual house or cottage, then for the convenience of cleaning grass and weeds, you must use a lawn mower. In case you are thinking of choosing an electric or gasoline lawn mower, then click here and you will find comparative characteristics of different models.
Over time, the line on the mower wears out and needs to be replaced. You can do this yourself. The choice of this polyethylene thread is necessary depending on the model of the mower. It is also worth keeping an eye on the rest of the unit’s details, here, for example, you will find information about Craftsman lawn mower blades, which also wear out and can lead to irreversible consequences.
The device of the reel into which the fishing line is inserted is very simple. But it differs depending on whether the coil works with one or two whine tendrils. It is important to observe safety precautions when changing the line in the reel.
Training. Removing and disassembling the spool
On most electric and petrol trims, you will need to remove the spool to replace the line. The FUBAG tool lets you skip this step. To make the instruction universal, we will still consider it in detail:
1. Secure the shaft. Insert the locking element into the corresponding hole. It can be a thin screwdriver or a metal rod.
2. Unscrew the bobbin case. In our example. Strictly clockwise direction.
3. Unscrew the cover in accordance with the direction indicated on the body.
4. Take out the winding spool.
The preparatory stage has been passed. You can go to winding the fishing line.
How to wind the line correctly on the trimmer spool. Step by step guide. How to wind the line onto the trimmer spool
Winding Algorithm
2. Insert the resulting loop into the groove.
3. Lay the line in accordance with the indicated direction on the element body.
4. Insert the short end into the slot on the side of the spool.
5. Fasten the long end in the opposite groove.
6. Place the spool with the wound line in the spool body.
7. Pull the line out of the locking slots.
8. Put on the cover and fix.
9. Trim the ends of the line, leaving 10 to 15 centimeters.
The replacement of the line is completed and now all that remains is to screw the bobbin onto the trimmer and you can work.
How to choose a fishing line. Length, diameter, limitations
As for the length, you should count on the estimated frequency of use of the trimmer. The more often, the more it costs to stock up the expense.
Information about the possible line diameter can be found on the body trimmer spools. Most likely, the range will be indicated there. The thickness varies from 1.2 to 4 mm. Choose the appropriate option, taking into account the peculiarities of the cultivated area. The larger the diameter, the easier it is to mow tough grass.
ATTENTION! Typical line problems
It is not for nothing that they say: “Warned. Means armed“. Knowing about possible problems and the causes of their occurrence, you can prevent them in time. We recommend to remember or leave a memo.
| Problem | Cause | decision |
| line break | Stones, twigs and solid objects in the grass | Avoid collision |
| Poor cord quality | Replace with a quality analog | |
| Wear of outlet holes in the head | Complete replacement of part required | |
| the line is unwound | Loose spring in the coil | Check spring and replace if damaged |
| the line sticks together | Poor line quality, due to which it can melt under the influence of temperature from a heating head | Reel in less line or replace with a better line |
For a better understanding of the mechanism of changing the line into a spool, we recommend that you familiarize yourself with the manual prepared by FUBAG specialists: