How to put a fishing line for a trimmer on a trimmer for grass without a coil.

Learning to correctly wrap the fishing line for a trimmer to the coil of a trimmer for grass and lawn mowing instructions for installation

Owners of private houses know how necessary the type of tool is such as a trimmer for grass. It can be gasoline and electric, and they differ in the design of power units. For injection of grass in areas where there are stones, trees and other obstructing objects, a fishing line for a trimmer is used as a cutting device. This consumable in the process of use wears out, so how to wind the coil of a trimmer for grass, we will consider in detail in the material.

Fishing lines is called consumable, which consists of nylon, and serves as a cutting device. Through this equipment, the grass grows, which is ensured due to rotation of the instrument head with a high frequency. This material has a different thickness, which depends on its use on the corresponding tools of low-power (from 1 to 1.6 mm), electric from 500 W (2-2.4 mm) and gasoline trimmers for grass with motorcycles (from 2.4 up to 3.2 mm).

The more powerful the tool, the accordingly there should be a cutting equipment. This affects not only the quality of the injection of grass, but also on the life of the material. If you ask the question of how to wind the coil of a trimmer for grass, then it’s time to change the reload of the tool. With the onset of spring, this issue is becoming more and more in demand, so it’s time to understand the instructions for replacing the fishing line in the coil of the trimmer for grass.

How to remove a coil from a trimmer for grass and extract a fishing line for a trimmer

Initially, before filling the fishing line for the trimmer to the coil of the trimmer for the grass, it is necessary to extract it from there. Coil or tip is a device that is located inside the braid, bobbin or drum. The heads are of different types (depending on the manufacturers), however, the principle of replacing the fishing line on the coil has the same. First of all, we will figure out how to remove the head from the tool, as well as how to get a drum with a fishing line from it.

It is interesting! The replacement of equipment can be done directly on the tool, but if you do it for the first time, it is still recommended to remove the head, and study the detailed process of winding. After the technology is mastered, you can perform work on replacement on a trimmer of a motorcycle or a gas station.

Instructions on how to promote a hand head on a trimmer, has the following look:

This process is not difficult, and as you know, it is not necessary to dismantle the entire head if you know how replacement is performed. When dismantling, consider the following nuances:

  • It is recommended to remove the head periodically to prevent the corrosion of the threaded connection. If you never unscrew the screw, then if necessary to do it will be difficult and even sometimes impossible
  • If the screw has a tetrahedral boring of the head, then for twisting you should select a screwdriver or bit of a suitable size to eliminate the licking of the faces on the head
  • When assembling the installation, a threaded seat should be treated with lubricants, for example, solidol or machine oil
  • If the edges on the screw are licked, then for its unscruptions you can use special clamping forceps
  • There are drums that do not require preliminary disassembly. To dismantle them, you should take up it, and rotate in the opposite direction of the direction of the clockwise

Knowing how to disassemble the drum, you should continue to clarify the process of replacing a trimmer fishing line for grass. Below the video shows a detailed process how to open a trimmer coil for grass and disassemble it.

Types of heads for trimmers

A trimmer is a tool that is used to combat vegetation in a summer cottage or household territory. Grassing and hay harvesting for cattle implies the use of benzo or motorcycle. The heads of different types are installed on trimmers for the grass, through which the grass and other vegetation occurs.

The heads are classified into three main types that differ not only in design, but even in price, the method of operation and service life. Consider all types of heads for trimmers, as well as their technical features.

Manual or mechanical coils their purpose and application

The first trimmers for grass were produced with manual types of coils that have a primitive design. They consist of a plastic or metal disk in which there are holes for fixing the fishing line. The holes have the corresponding size, which allows the cord (fishing line for a trimmer) of a certain diameter. However, this is not the only drawback of equipment, since another minus is the need for frequent fishing line refueling. Below is a variant of the simplest coil with a fishing line for a trimmer for grass.

Nylon Trimmer wire Changing Process || Cordless Grass Trimmer ||

Following the simplest coils, mechanical head heads appeared, inside which a bob is installed with a fishing rod. Such devices are excluded deficiency of the fast consumption of the cord, however, to serve a new fishing line, you should interrupt the work on the injection of grass. To supply the cord, the head is equipped with a manual regulator, through which the fishing line stretches. Today, the manual type models are rarely used, which is associated with their great drawback. the need to interrupt the work and drown out the engine in order to lengthen the cord.

Installation of a new fishing line on the coil of a trimmer for grass

Equipping the coil with a new fishing line is performed in the reverse order. The procedure looks like it is described below, regardless of the model of the lawn mower:

Step one: fixing and styling

Fold the end of the fishing line in half. Place the workpiece above the coil on each side of each half of the winding area. Wrap both halves completely around the winding drum. Stretch the fishing line for the trimmer through the loop.

The procedure for preparing fishing line in the field of both wound sections of the drum. The loops are laid in specially made cutouts, after which the winding of the fishing line is performed in each area

Pull the fishing line for the trimmer enough and put the knot in the groove made on each side of the winding drum.

Step two: winding cutting material according to sections

The next step is to turn the fishing line in a circle of coil, observing caution. It is necessary that each half be filled with “its own” winding, exactly, without intersections. Usually on the hull of the winding drum you can see the arrows indicating the direction of winding. This moment should be borne in mind, filling the reel with a fishing line.

Step Three: The Club of the Head Noner

Stretch the ends of the fishing line through a pair of oval cuts of coil. Replace both goals and a spring (if any in the design) with new elements included in the package. Bend both ends of the fishing line at right angles.

The last technical stroke of the process of replacing the fishing line on the trimmer is to put the cover on the head with subsequent fixation by pressure and slight turnover.

Let each end into the hole, which is at the base of the winding drum. Install the coil in the inner area of ​​the head with an emphasis on the spring. Put the lid, leve on the base and light pressure down with a small rotation counterclockwise, put the cover on the tongues of the latch. This is where the replacement procedure is completed.

Typically, the process of replacing fishing line on a trimmer of a particular model is popularly described by accompanying documentation. Another question is that this documentation is often supplied in a foreign language, since the notorious lawn mowers for the most part are imported products.

Meanwhile, there is a much simpler, more economical and healthy way for human health and nature. putting the lawns of an ordinary peasant oblique in order. Blory of braids for grass:

which is subsequently accompanied by abundantly growing greens, and not by the formation of dryness as a result of the work of a trimmer for grass.

Brief briefing

Z-Zila-publications of materials interesting for society. News of technologies, research, world.class experiments. Social Multi-Tematic Information-Media.

Installation of a sleeve with antennae kanates on a trimmer for grass

Remove the plastic coil with a fishing line from motorcycles and instead of it, install a trimmer’s working body assembled by ourselves with our own hands. Relibly tighten it with a nut with left.sided thread with a end key with a side handle, stagging the drive from the back of the screw through a special hole.

We are convinced that none of the ends of the ropes hurt the protective casing, which is one of the conditions of safe operation of this tool. To do this, one “Usik” alternately opposite the casing with an effort we pull on the hand and fix the presence of a completely noticeable clearance between the ends of the antennae and the protective casing.

Home.making test in the case

We go out with the instrument to the place where the wood of grass and bushes grow, and turn on the trimmer for the grass, having previously closed the face with a transparent shot or at least with protective glasses.

We are convinced that the work of a trimmer for grass with a home.made working body based on a steel rope has become much more efficient and more productive.

Features of the use of trimmers

A trimmer for grass, mowing grass with a fishing line, can be used near: houses and other buildings, fences and hedges, trees and shrubs, beds and flower beds, a row in a garden plot.

Such a convenient, and most importantly, effective device, like a trimmer for grass, exists in several variations:

As the names understands, the types of trimmer for grass are noticeably different from one another. But regardless of the type of this tool, its cutting element can be a fishing line for a trimmer. Of course, a trimmer tilted for the grass for a trimmer is not infinite. And sooner or later it will need to be replaced by a new.

Fishing consumption directly depends on the frequency of using the device and the scale of the work performed. The more herbs are brazen and the more often it is trimmed with a trimmer for grass, the more actively a fishing line for a trimmer is consumed in it. And, accordingly, the faster it will end. In this regard, the question arises: how to refuel a fishing line for a trimmer to a trimmer coil for grass?

Not everyone knows the answer to this question. But the winding of the fishing line on the coil plays an important role in the work of a trimmer for the grass. To make the device normally, it is very important to correctly wind a new fishing line for a trimmer to the reel. About how to change a fishing line for a trimmer on a trimmer, and will be discussed in this article.

Which line for a trimmer to choose

Before you stock up on this material for refueling in a trimmer for grass, you need to decide on the choice. After all, the usual so.called round fishing line for a trimmer is far from the only existing look. How to choose the most suitable? First you need to determine the working conditions.

How to replace the gut/line on your edge trimmer or weed eater

Type choice. a line for a trimmer with a round section is the most common. It will suit any reels with the rarest exceptions. This type of consumable is suitable in order to mow fresh, juicy grass. But with the mowing of the so.called dryness, this kind may not cope anymore. It is pointless to mention attempts to mow shrubs and mention.

In addition to the usual type, there are others with sharp faces. Usually they are made by a “star” or “square”. The presence of sharp faces is the main feature and key difference between these threads.

It is thanks to this feature, the threads of such species are able to mow dry weeds. But the spicy threads are not devoid of disadvantages, the main of which can be called rapid wear and strength, markedly inferior to the round type.

In addition to the already mentioned types of forests, there are still interesting and often encountered varieties. Especially among them can be noted fishing lines, inside which a metal wire is stretched. Threads of this type are often used in tools working on gasoline and having an engine more powerful than one and a half horsepower.

Threads with a metal core are both with a round section and with sharp faces. Regardless of the type of cross section, such threads are the best suited to overcome plants. Threads related to this type easily mow not only dry grass, but even small shrubs.

The threads with wire inside are favorably different from other types of consumables for their incredible wear resistance. But unfortunately, this feature has a more than noticeable effect on the price of this type. The cost of threads with a core significantly exceeds the cost of threads of other types.

Choice in thickness

In addition, special attention should be paid to the thickness of the consumption material. For mowing young grass, a thread is suitable with a diameter of one and a half millimeters. The larger the diameter of the thread, the more dry and rude weeds it can overpower.

When choosing a fishing line in thickness, there is one “but”. It is important not only to evaluate the capabilities of the material, but also to take into account the features of the trimmer for the grass. You must definitely look into the user’s management, which is attached to the tool, and find information about the requirements for the cutting element.

The use of inappropriate thread can lead to the failure of the tool. The use of too thick thread will entail the overload of the device engine. And the use of too thin thread will significantly increase the wear of the torque.

That is why it is necessary to approach the choice of consumables no less responsibly than to refuel in a trimmer for grass. When a suitable fishing line for a trimmer is found and purchased, you can begin to consider the ways to wind it on the coil.

fishing, line, trimmer, grass, coil

The choice of fishing line

In order for the dressing of the fishing line to the trimmer head to be successful, it is important not to fail to choose the consumer material. The thicker the cord you refuel, the more thick and hard grass it can cut. A universal fishing line for a trimmer is often used, the diameter of which is 2 mm. You can choose the diameter suitable for the mower in the following ways:

  • See the information about the thickness of the fishing line in the instructions attached to the trimmer.
  • Pay attention to the squash itself. Sometimes information is applied on it about possible fishing line diameters.
  • Another option is to try to insert the cord into the output. If it easily passes into it, then the selected fishing diameter is suitable for use.

You can choose a cord thread by type of engine. If the fishing line for the trimmer is too thick, then the resistance to rotation will increase. the engine in this case will overheat and will soon fail. Useful recommendations:

  • For an electric device with an engine of less than 500 in, a thread of 1.3 mm thick is suitable. If this was not found, then you can use a fishing line for a trimmer by 1.6 mm. If the power is more than 1 kW, then select a cord with a diameter of 2 mm.
  • The gasoline trimmer for grass has a shaft mower. For the bent version, the cord for 2 mm is often used. If the shaft is straight, then set the thread 2.4–2.5 or 3 mm. The thickest fishing line for a trimmer is installed on powerful devices. from 1.3 kW.

Pay attention to the type of cross section of the cordry thread. Some popular options:

  • The most common fishing lines with a round section. They mow fresh herbs well, but they cope worse with shrubs, drows.
  • Twisted (spiral) cord does not differ in high strength, but well suitable for thin young grass.
  • The jagged thread with sharp edges is ideal for a large weeds in a neglected area.
  • You can mow the lawn in a rectangular, starry or square fishing line for a trimmer for grass, but they are not very durable.
  • The most durable is a two.component cord with an internal core and a round section.

Keep in mind that it is impossible to use wire, metal strings and cables, as well as an ordinary fishing thread. The device will be dangerous for both the user and for others. So the cable or similar products will gradually begin to shut down, as a result, their ends will be reacted, and small pieces will scatter at high speed.

Removing and disassembling the coil

The braid trimmer head consists of a casing, a spring (not in every model), bobbins with a cord, cover. Before proceeding to disassemble the coil of the electric unit, be sure to turn off the trimmer for the grass from the network. The disassembly method depends on the mounting of the mowing head. First option:

  • To remove the lid covering the inside of the head, click on the latches (latches), which are located on its two sides.
  • Remove the lid under which you will see the spool. remove it from the body. Some trimmers have a spring under the bobbin coils, which should also be carefully pulled out.
  • Removing the bobbin, you will see the screw in the center of the case. Unscrew it with a screwdriver.
  • After extracting the fasteners, take the case body and, shaking it in different directions, remove the gearbox from the shaft.

In the second version, the head of the trimmer for the grass is twisted onto the shaft of the gearbox. To remove it, you need to fix the shaft. To do this, in such devices there is a hole through which a thin screwdriver or metal rod is inserted. Brief Instruction:

  • Insert a screwdriver into a special hole, then stall the shaft.
  • Get the body of the head and start twist it. This should be done clockwise, t. to. Larva shaft thread.

How to insert a fishing line for a trimmer into a trimmer for grass?

Refueling a mowing coil of cutting thread for a trimmer for grass is not a complicated occupation, however, novice gardeners will have to practice a little to be able to quickly insert the cord into the existing household trimmer for the grass.

There are several ways to refuel a mowing head of a trimmer for grass. The first method is the simplest and is well suited for beginner gardeners.

In this case, the cord is inserted into the coil in the following sequence:

  • First, you will need to reinforce from a common spray of about 6 m fishing line for a trimmer for grass, and then cut the resulting segment in half. As a result, 2 threads should be obtained, 3 m long;
  • Then, at one of the ends of the first segment, you need to make a peculiar hook, and insert it into one of the through holes located in the upper part of the spool;
  • Next, you need to start wrapping the fishing line on the spool in the direction indicated by the arrow. During winding, it is necessary to ensure that the fishing line for the trimmer evenly lays on the surface of the spool, and does not go beyond its upper section. It is not necessary to wind the segment until the end, about 15 cm of thread should remain in the hands;
  • The remaining free end of the wound cord will need to be inserted into one of the recesses located in the upper part of the spool;
  • Further, the same procedure will need to be done with the second piece of fishing line. It will need to be wound on the lower section of the spool;
  • As in the first case, you do not need to wind a fishing line for a trimmer to the lower section. The remaining piece of thread will need to be inserted into the second groove of the spray.

After the operation performed, the coil will need to be installed on a trimmer for the grass and start it. To check the reliability of fastening the thread, you will need to press the gas lever to the end so that the engine reaches maximum speed. If the fishing line for a trimmer does not fly out of the head, then the fishing line for the trimmer is held reliably, and during the mowing of the grass it will not fly out of a braid coil.

How to wind a fishing line for a trimmer to a trimmer to grass?

The second method is a little more complicated in independent execution.

You need to wrap the cord for a trimmer for grass in the following order:

  • First you need to cut off the total amount of approximately 6 m of the cord, and bend it. In this case, one of the parts should be slightly larger than the second;
  • Then the thread of the place where it was bent will need to be inserted into a recess located on the dividing line between the two sections of the spool. As a result, the first part of the segment should be in the upper, and the second. in the lower section of the spool;
  • After that, you need to start wrapping the fishing line. You need to do this in the direction of the arrow indicated on the corn. During winding, the cord should not be interpreted. The upper part of the segment should be neatly wound on the upper, and the lower. on the lower section of the spray. After that, two 15-centimeter segments of the cord should remain free;
  • Further, the remaining ends will need to be inserted into the recesses located in the upper part of the spool;
  • Then the fixed ends must be stuck into the through holes of the braid head of the trimmer for grass.

At the end, you will need to connect all parts of the mowing head, and pull each end of the fishing line a little. The finished coil will need to be installed on a trimmer for the grass and continue to work on the site.

Types of semi.automatic heads

Semiautomatic.type mowing head. As a rule, it consists of a case, inside which several springs and a spool are located. Shpuli, in their execution, are divided into:

Many owners of household trimmers remake single.sectioned spills for two.section. To do this, you need to find a strong metal plate, and apply a circuit with a spool diameter on it. After that, the plate is cut along the contour so that the thickness is located near the cord winding area. As a result, the resulting circle must move freely around its axis. Further on the resulting ring you will need to make a cut and put the spool inside the ring. Both parts must be interconnected using a tape or fast.drying glue. As a result, the manufacturer gets a spool, a fishing line for a trimmer in which can be wrapped in two sections.

Classification according to the charging method

Another important factor is the principle of charging fishing line into a mowing head. On this factor, coils of the following types are found on the market:

  • Fast. to charging devices of this type that uses them the operator does not need to remove the headset from its base. At the same time, it is enough to carefully stick the cord to the center of the coil and wrap it around the base several times. It is convenient and, moreover, saves a lot of time;
  • collapsible. to replace the cord of the coils of this type, you need to disassemble. Beginning gardeners may have problems with this procedure, however, having received the necessary experience, in the future, the head of the head will occur much faster.

As practice shows, for a novice gardener, a quick coil for a trimmer for grass is best suited. It is distinguished by strength and can be actively used in areas with a large number of solid barriers.

Is it possible to use a cable instead of a fishing line on a trimmer

Of course, you can. However, at the same time, it is worth understanding all the insecurity of this venture, and the ultra.suffering exit of the transmission of the benzotimmer out of order. Indeed, a steel cable is a hundred times stronger than a fishing line, even a special, trimmer. It will not be so often torn from grass, branches and stones, so it will last much longer.

fishing, line, trimmer, grass, coil

At the same time, you need to understand that the fishing line for a trimmer is torn when the trimmer for the grass is not just like that, but from a strong load. As a result, the engine does not stall, while dynamic blows to the transmission of the lawn mower are extinguished. In the case of a steel cable, the entire load will fall precisely for the transmission, as a result of which it will quickly fail.

fishing, line, trimmer, grass, coil

If you really want to try to use a cable on a gas station, then at least it needs to be correctly installed. Firstly, you can not wrap a long cable to the coil. Make its length so that it does not hurt the protective casing of a trimmer for grass when rotating the coil.

Be sure to clamp the cable with washers in the middle part and put one drop of welding at its ends, so that it does not bloom. As a result, the cable should not have any issue, and welding at the ends will protect it from blooming. However, even in this way, using a cable on a benzoca or a trimmer is very unsafe. Much easier to use ready.made factory nozzles.

Factory nozzles for a trimmer for grass and motorcycle

Today on sale you can find ready.made nozzles for motorcycles and a trimmer for grass, which make it possible to increase the efficiency of this tool several times. Nozzles can be made in the form of knives, with a chain or a steel cable.

Of course, the use of the finished nozzle on the trimmer allows you to protect yourself and others when working with this tool, and also not to be afraid for its premature failure. It is easy to find such nozzles in online stores, although you can try to find them in ordinary.