Trimmer for the grass there is no idle course of the cause of the malfunction. Similar notes

Why does a trimmer for grass stall at idle

In order to more accurately find the cause of the trimmer malfunction for the grass at least any brand (for example, echo) and find out the possibility of eliminating it, it is necessary to establish, when performing what kind of act the device stalls. The engine can turn off both at idle and at high speeds, heated under load or immediately after starting, etc.D.

If you stalled after gas supply

The owners of gasoline cos are quite often mentioned that the lawn mower stall when the gas is pressed. Usually such a breakdown appears due to problems in the carburetor. A failure in his work can occur due to long-term storage, implementation in complex criteria, significant overload of the motor. The symptom of such breakdown will be the vibrating movements of the device during operation.

From time to time, a trimmer for grass stalls when you give gas, since the fuel valve is closed. This interferes with the supply of gasoline. To remove the case, quite loosen the valve. Such a makar will be restored the usual supply of the fuel of the carburetor.

Another probable reason why the lawn mower stalls when gas supply is the pollution of the saapun (revolutionary valve). This detail prevents the occurrence of a vacuum in a gas tank. If it is clogged, the air does not enter, but it means that fuel does not go to the carburetor. To eliminate the task, you need to clean this element.

If stalled under load

From time to time, a trimmer for grass stalls under load, because it cannot gain momentum. This means that the cable stretched in the carburetor is weakened and sagging. If there is experience in repairing this node, the cable should be pulled.

Another cause of the malfunction. the fuel fuel hose is stretched extremely. With a load, it is even more stretched, as a result of which cracks form, ultimately the part deteriorates. To eliminate the breakdown, this element will need to be changed.

The gasoline trimmer for grass stalls at idle

Often, when reducing the speed, the motor motorcycles stalls and does not support idle speed when re.starting. The main reasons for the occurrence of such a breakdown include pollution or the dumping of the carburetor, as well as clogging of the air filter.

Gasoline trimmer for grass stalls at idle

In case of violation of the optimal settings of the carburetor, it is necessary to clean it and repeated adjustment. You can cope with clogging the air filter of a trimmer for grass by placing it for several hours in a solution with a conventional domestic detergent. If independent cleaning has not helped to cope with the blockage, it is better to purchase a new filter element in accordance with the operating manual.

After the measures, the user will not encounter a situation for a long time when a trimmer for grass stalls in idle and functions only when gas supplies.

They brought a Chinese benzotrimmer for repairs (they said it turned in the back, we are undergoing to start like.

Apart from time to time, from time to time, gasoline trimmers for grass can stall due to the fact that the valve located in the gas tank cover just clogged or stick. To find out, try to use the braid by loosening the gas tank cover. If in this mode the device is working on a dull way, clean the valve.

over, the lawn mower can stall due to the disgusting receipt of fuel in the carburetor. Nevertheless, repair t.e. It works normally at low speeds. Why then the device starts up, ask you? The reason for this is that at first, the fuel gradually runs into the carburetor and is enough to work at high power. The lawn mower does not work at idle. But then it is produced and at huge turns the engine begins to stall. As for the carburetor, here the problem may also consist in the fact that its body is very pulled.

In addition to everything else, do not forget to check the fuel intake hose. The inconsistent may be that it holds weakly or in general cracked.

These are the main prerequisites why the lawn mower can stall.

Air filter

On the pages of the global network, you can find information that the chainsaw of the Stihl 180 can stall due to severe air filter pollution. I would like to refute this not absolutely true information, and say that the STIHL carburetor MS 180 is equipped with a compensator, which is designed and installed in order to make an air focus necessary for the usual operation of the Stihl 180 chainsaw, bypassing the dirty filter. Of course, the power with a clogged air filter will fall a little, but it will definitely not stall. Another capacity may fall due to the wear of the piston, here the repair of the piston chainsaw of the Stihl MS 180 will already be required.

Forbidbenzokos when clicking on gas: causes of their solution.Glumpnbenzokos (trimmer for grass):. Fighting.

• idle sensor failure;
• clogging of the throttle;
• work of the sensor of the position of the trissellain;
• Injector or carburetor pollution

The grounds for breakdown can be completely different, therefore, when eliminating them, it will be necessary to operate with all kinds of actions and techniques. If your shoulders are considerable driver’s experience, and you know the features of the car’s work as your five fingers, regardless of the model, then the elimination of this kind of malfunctions will not cause you any problems. And all because such breakdowns are not complex or serious. It follows that you can establish the operation of the car without outside help. Well, if the level of awareness or lack of free time will not give you the opportunity to eliminate all defects yourself, it is better to seek help from knowledgeable people who can save you from unpleasant moments in the shortest possible time.

The reasons

Trammers for grass are reliable and durable (of course, subject to proper care). Most often, malfunctions arise due to contamination of structural elements.

If the engine of your lawn mower does not start, does not gain momentum, does not reach the power you need or suddenly stalls, it may be a reason:

• low.quality fuel (fuel mixture), it can be in long.term storage or in non.compliance with the recipe for the preparation of the mixture;
• The grass was wound on the shaft of the fishing/knife head;
• clogging of the air filter/muffler;
• Balance of the carburetor.

Ways to eliminate problems

The first three reasons are quite simple to eliminate. If the matter is the mixture, it is necessary to pour old fuel from the tank, prepare a new emulsion from high.quality gasoline and engine oil (if your motor requires a mixture) and pour it into a fuel tank. If a trimmer for grass works on clean gasoline, it’s still easier.

In the second case, it is necessary to carefully release the details of the trimmer for grass from the wound grass.

If the filter is clogged, you can try to rinse it. If this procedure has not brought the effect, replace it with a new.

The last reason why the lawn mower does not work properly will require you a little more knowledge and skills.

In order to properly adjust the carburetor of the lawn mower, it is necessary to observe a certain procedure. First of all, carefully clean the air filter. The easiest way to rinse it (it is advisable to carry out the filter with water regularly after 9-10 hours of operation).

After that, in the diagram of your trimmer for grass, which is in the instructions for the operation of the device, find the adjustment screws. Usually there are three of them: the first is responsible for the supply of fuel, the second. for idle, but the third is designed to limit the number of maximum engine speeds.

Next, you should turn on the unit and wait for the engine to warm up.

Slowly twist the first adjusting screw (fuel mixture). Catch the moment when the motor begins to stall, and turn the screw in the opposite direction 45 degrees. If you did not have time and the motor stalled, the screw should be turned 90 degrees. Open the throttle and see how the speed is going. Next, you should slowly unscrew the screw (each turn. the same 45 degrees) until the moment when, with full gas, the motor begins to firmly issue maximum revolutions.

The second screw, as mentioned above, controls the engine speed at idle. Weakening it, you reduce the number of revolutions, tighten. increase. The screw must be adjusted so as to ensure confident operation of the motor at small speeds. Accelerate the engine for better starting a little. At the same time, make sure that before the movement of the knives/coil with the fishing line, the motor makes several dozen revolutions. With poor starting the engine, screw the screw slightly.

After you have adjusted the first two screws, test the operation of the device at the maximum engine speed. If necessary, you can limit it (maximum). this will serve as protecting the motor from “boiling”. To do this, you need to do the third screw. Unscrew the fixation nut until the moment when the control screw can be calmly turned. To increase the maximum speed, the screw must be loosened to reduce. on the contrary, tighten. Fix the screw position with a nut. Test the work of the motor again.

Spend the position of the screws regularly. a high level of vibration characteristic of benzocoses can cause their involuntary shift.

Remember that carburetor adjustment is not the final procedure. During operation, Motokos, most likely, you will have to mess with it more than once, because an unbalanced carburetor is both an increased fuel consumption and a quick failure of the candles, not to mention reducing the power and productivity of the device.

Ways to eliminate breakdowns

Subsequent work is likely on the carburetor:

• cleaning and adjustment of the fuel supply valve;
• similar work with a valve producing redesigned gases and pairs (after burning fuel);
• replacement of the spring more weak on the entrance valve;
• restoration of the tension of the carburetor cable;
• replacement of the fuel leaks hose, verification and strengthening of a weakened connection;
• changing the rotor damper disk;.
• Change of faulty wire or ignition coil.

Immediately after the start

Smelting Motokos or a trimmer for the grass after starting is justified by subsequent reasons:

• impressive of previously adjusted valves;
• first the wrong settings of the valve mechanism;
• clogging with deposits of the fuel supply valve;
• the hose is worn or poorly annexed.

Due to the violated method of injection of a fuel, a lawn mower or a trimmer for grass is very vibrated in work.

When pressing gas

If the lawn mower stops when pressing the gas, then the reasons may be the following.

• The most common option is a fuss of adjusting the carburetor, which occurs with significant loads on the drive, after a prolonged inaction of the mechanism or when it is used in severe conditions.
• The clogging of the fuel valve, which eliminates it with the message, as a result of which gasoline according to the system begins to flow normally.
• The weakening and hanging of the cable in the carburetor. Also, a tensile of the fuel hose can occur up to its rupture, caused by the action of a significant load.
• Clogging of the saapun (check valve), as a result of which fuel does not enter the tank.

If the problem is associated with the carburetor node, then it can be recognized by the appearance of vibrations of the lawn mower. Когда лопается шланг или растягивается трос — выполняют замену данных комплектующих.

Ways to eliminate breakdowns

The following works are possible by carburetor:

• cleaning and adjustment of the fuel supply valve;
• similar work with a valve producing spent gases and pairs (after fuel burning);
• replacement of the spring weaker on the entrance valve;
• restoration of the tension of the carburetor cable;
• replacement of the fuel leaks hose, verification and strengthening of a weakened connection;
• changing the rotor damper disk;.
• Change of faulty wire or ignition coil.

The list of work on the work may also include the cleaning of the nozzles (in a 4-stroke engine), replacement of the valve washer, gaskets in tanks and so on.

Operating advice

It is worth paying attention to several recommendations for working with a benzoca or a trimmer, extending the service life of the device to several times.

• As soon as you notice that the lawn mower or trimmer vibrates for the grass. immediately stop working and check the serviceability, performance of specific parts.
• Valves adjustment and checking the work of pistons and cylinders, cleaning and changing the nozzles perform, starting from the requirements set forth in the user guide and the recommendations of the masters of service centers.
• When air bubbles enter the system due to impaired fuel hose-give in to gas. With the combustion of gasoline with higher speeds of the gas bubbles motor will be less. But this is a temporary measure. As soon as possible, disassemble the unit and eliminate the cause of the suction of excess air.
• Do not work as a unit in cold weather, not heating the engine. under load it can often stall. The effect here is the same as in the case when the driver in.40 started the car and immediately drove off, without waiting for the engine heating.
• Do not leave the unit on the roadway. During the accident, the hit will immediately break, and this will make the purchase of a new unit for a forced measure. A car that has crashed into it at best will receive damage to the body and bumper.
• Avoid working with a motorcycle or a trimmer in a downpour. Water getting along with air in the worst case can lead to engine explosion. Similar situations arose with cars.
• Do not use unverified vehicles and lubricants. The mower warms up the engine more than it would do the car itself. when overheating, it will automatically lose its lubricants. It will turn into a burned out reagent. sticky, too viscous and viscous, like fuel oil. He will immediately stall (and drown out) the motor.
• If the oil is old, previously merged from the tank of the machine or other (or the same) lawn mower (on a 4-stroke engine)-defend it, filter to clean from dirt and metal. But at the first opportunity, purchase fresh motor oil.
• If the engine is two.stroke. observe the ratio of gasoline and oil. For compositions with mineral oils, this is approximately 34: 1, for semi.synthetics. 42: 1, for purely synthetic. 50: 1. Do not violate these proportions: “rewinded” gasoline will not burn out and quickly clog the engine, “under.appropriate”. will accelerate the wear of its mobile parts.
• In terms of viscosity to winter classes, they include marking oils: SAE-0W/5W/10W/15W/20W/25W. To the summer-SAE-20/30/40/50/60. For example, SAE 10W-40 is already all-season oil (when working mowers from spring to autumn inclusive). Be sure to check with the manufacturer exactly what oil is needed.
• Always use high.quality gasoline that has passed the manufacturer all stages of cleaning.
• Recommended octane number of gasoline-AI-92/95/98. The use of the 76th can lead to a non-power of the engine by frequent stalling if you are poured, for example, the 76th or 80th gasoline.
• If you are not sure of the independent solution of problems with a gas station (which does not gain move and often stalls)- call the master or contact the service center for repairing motor and garden equipment. Specialists do not get used to doing this work for you.

Observing all these precautions, you will give your mower for many years of fruitful work, and yourself. the luxury of well.groomed lawns, comfort and convenience when mowing unnecessary vegetation in your site.

About the reasons why the lawn mower stall when you press gas, watch in the next video.

Immediately after you started

The unit can stall immediately after the launch, if the carburetor is cesspool or was incorrectly configured. this causes Uneven fuel supply

The result is that the device begins to vibrate clearly. To eliminate problems, the carburetor is reconfigured, acting according to the instructions for the mechanism.

The engine also stops when Clotting of the valve

, supplying fuel. In such cases, it is enough just to clean it. If the lawn mower at first earned, but then immediately stalled, then possible fuel to the carburetor unit enters some difficulty. The weakening of the valve helps to solve the issue, which provides free circulation of the mixture in the system.

The stop may also be called Air suction

In the presence of mechanical damage to the hose (holes, cracks) that fuel fuel fuel. In this case, the drive should be added to the drive to quickly drive air bubbles from the system.

When opening an air damper

It happens that the unit stalls when opening an air damper, working normally at idle. This is due to the air leaks of the system caused by the presence Cracks of the fuel hose

or problems with seals. The carburetor dosing system can also work malfunctioning, while the lawn mower will stop after the opening of the damper.

All possible reasons that the lawn mower stalls, and the methods of eliminating them are contained in the next video

There are many reasons for stopping Motokos, but the most commonly occur in work related to its carburetor. They can arise in any case. The most problematic option is when there is a serious breakdown, and you will need to purchase new parts or change the lawn mower.

So that the trimmer for the grass works normally for a long time, you should strictly comply with the requirements of the operating instructions. It is necessary to refuel the unit suitable for it in the composition with a fuel mixture, the device should work with a moderate load.

What is the resource of Chinese motorcycles?

Chinese or lawn mower is able to work about 500 mothers. But this is with the correct mixture, good oil, a good factory assembly. If a person fills gasoline with one good refueling, accurately measures the same oil along the Menzurka, the carburetor regulates the same mixture, the fuel burns correctly, then the coveted half a hundred hours of motor resources is a very affordable bar.

But here you can’t also forget about Chinese marriage. They even balance the shafts on their knee, put the cheapest bearings, carburetors stamp with clogged channels. If a person understands the principle of operation of a two.stroke engine and carburetor, understands how to sort it out, then he can eventually collect an almost perfect trimmer for grass.

In general, if we consider the Chinese motorcycle foam as a space for creativity, then even its breakdown is an occasion to study something new, this is a designer for a man.

If you need a tool, then it is worth finding a Japanese analogue, or switch to an electrical model.

Methods of elimination

Repair of a lawn mower is best started with a phased check of the main components. The first thing to check is fuel in the tank, as well as the presence of lubricants on the main nodes of the tool

It is also important to know what quality and what is the proportion of the fuel and oil used. If something is wrong, then the piston system may fail, and its replacement is expensive

Next, it is worth evaluating the serviceability and performance of the spark plugs. The result is evaluated by the presence of a spark when there is contact with the tool body. If the malfunction in the candle, then you need to remove the voltage wire from it.

In case of contamination, it is recommended to replace with a new one and drying the candle canal. This is also done if there are cracks or chips on the candle housing. The gap between the electrodes is set 0.6 millimeters. Squeezing a new candle is also produced by a special key. At the end, the voltage wire must be connected to it.

The inspection of filters, both fuel and air. If the blockages are strong, then the best solution will be their replacement. You can try the air filter with water with the addition of a detergent, and then dry. It is also sometimes soaked in gasoline

After drying and installation, it is important to moisten the filter with oil, which is used in the mixture with fuel

It is very easy to eliminate the problem in the form of a stalling lawn mowed immediately after starting. it is enough to adjust the carburetor according to the scheme given in the documentation. Sometimes you have to send the valves of the carburetor to facilitate the supply of the mixture in it.

Sometimes the lawn mower stalls due to the receipt of a large amount of air. In this case, it is necessary to increase engine speed to release it. It is also necessary to check the fuel hose for possible damage. If necessary, it is changed to a new.

It is important to maintain a gearbox clean, and its gears should always be treated with a special lubricant. It is worth noting that it is not always possible to repair a gearbox and starter on your own, therefore it is more advisable when breaking down these nodes to replace them with new

When reducing the engine power, it is worth paying attention to the exhaust muffler, or rather, to the net in it. She can clog because of soot from burned oil

This malfunction is solved cleaning the grid. You can do this using a small brush with wire or nylon bristles, as well as compressed air.

Clutch in benzocoses can break due to wear of the pads or a bursting spring. In both cases, the failed spare parts are replaced. Sometimes the clutch coupl is unusable, it can also be replaced with a new. over, on sale there are both couplings in full assembly and individual elements to them (washer, drum, etc. D.).

The lawn mower stalls in other words suffocates when pressing the gas

If the inconsistent is associated with the carburetor node, then it can be recognized when the lawn mowing appears when the vibrations appear. When a hose bursts or a cable stretches, a change of data data is made.

When a braid for grass stalls at large speeds, this is due to the following problems:

• clogging or clutching the valve placed on the gas tank lid;
• The carburetor was drained under the influence of vibrations that occur during the operation of the mechanism;
• obstacles with the circulation of fuel consistency;
• atmospheric air
• The hose created to fuel fuel cracked or slightly connected.

The carburetor is regulated by focusing on the operational annotation to the trimmer. For the option, it is often enough to weaken the tightness of its body. If there are problematic issues with the circulation of the fuel consistency, then it can gradually enter the carburetor. After its production, the engine stalls at huge speeds.

At single speeds, all.fought trimmer stopping the grass are subsequent:

• pollution, drainage in another incorrectly configured adjustment of the carburetor;
• clogging of the air filter;
• reducing the speed of the gearbox when heating it, which is a consequence of the use of inappropriate fuel consistency;
• clogging of the throttle;
• air entering the system;
• insufficiently fuel at the work of a lawn mower.

If a carburetor is a problem place, then the technique will stop at the “cold” and with a “hot” launch.

The unit can stall immediately after starting, if the carburetor is resolved as it was also called incorrectly configured. this causes an uneven supply of fuel. The result will be that the device begins to vibrate clearly. To eliminate problems, the carburetor is reconfigured, acting by annotation to the mechanism.

Filters

Blocking air filter ─ another reason for the unreliable operation of the device. To check the involvement of this element in the malfunction, you need to start the lawn mower without it. The contaminated filter can be washed in gasoline, dried or replaced with new.

The clogged fuel filter does not let the fuel into the cylinder, and the engine with full gas stalls due to elementary lack of gasoline. This element is located inside the tank on a fence hose. To eliminate the problem, instead of the old filter, put on the new hose or rinse carefully the one that was removed.

Advice! When trying to pull out a cork in the tank, the hose along with the filter can fall into the tank. You can get them with tweezers.

What to do if the lawn mower starts and stalls?

Now we will consider all the above problems described in more detail.

In principle, the reasons why the engine of motorcycles stops working when pressing gas can be a huge number. Here we will consider only the most common.

Perhaps the air damper just clogged. And to eliminate the problem, it will be enough to simply clean the air damper. The engine also stalls due to the clogged air filter. To clean it, the filter should first be washed in the solvent, and then blow the stream of compressed air.

A similar procedure should be carried out with the clogged fuel filter, which prevents the intake of the fuel in the proper volume with an increase in engine speed.

The engine can stall for other reasons. Firstly, the spacer is worn between the cylinder and the carburetor, and secondly, the crankshaft oil seals began to suck in air.

We have already indicated that in this case the problem is in the carburetor. In it, due to increased temperatures, gasoline begins to boil, which is why the air-fuel mixture ceases to form or its quality is critically reduced.

In addition, this problem may arise due to the fact that the carburetor is equipped with a rotary rather than a disk damper. If the problem has acquired a chronic character, then it should be solved radically. by buying a new carburetor with a disk barrier.

Most likely, access to the fuel tank is difficult or completely absent, which is why a reduced pressure zone is formed in it, due to which the engine stops receiving fuel in the required amount and because of this you stop working.

The engine at idle can stall for the following reasons:

News ONENEN ONENEN ONENY ONENY ONE ONE ONE

LSI and began to prepare not quite normal gasoline solution, which is why they began to fall on the drum;

You will need spare parts to eliminate most problems, and the Well Part will be ready to provide them with the best cost to you.

Why is a trimmer for grass does not work at idiral revolutions.Ru

When purchasing a lawn mower, you must be prepared for the fact that, as in all other similar tools, breakdowns may also appear in it that will require repairs.

But do not immediately run to the service center and pay big funds to the craftsmen who convince you of the presence of severe malfunctions in the device.

The lawn mower stalls at high speeds

Perhaps more and more a widespread complaint associated with gasoline trimmers sounds like this: “The lawn mower stalls”.

Naturally, a rather harsh fault may be a prerequisite for this. I can’t get a trimmer for grass why when operating the engine on but saw does not spin? It works only when it is worth opening its trimmer for the grass does not work right away. On the suction. It works only when opening an air damper for 1 mm I do not think that a trimmer for grass but. But in most cases, the situation is even easier than it seems to be the 1st gaze.

In order to cope with such an inconsistent, first, try to deal with its causes without the help of others, because, having found out the reason, it’s even easier to fight with the inconsistency, and from time to time it is even self.destructive.

In fact, circumstances, this is when the lawn mower stalls at high speeds, there are quite a lot of these circumstances.

Another is the presence of defects in the power system.

In this case, the lawn mower will stall at idle. Works only at idle. trimmer for the grass is almost new. This is possible only in case I can’t start a trimmer for grass Craton works on a leak. Stalls, mm for two. And she doesn’t work. If the engine is at idle why the engine works. Dilems with the power system may lead to a drainage or incorrect adjustment of the carburetor.

Chinese lawn mower is not idle,-the prevention of the carburetor adapter / BC330 Repair

When it is hard to start a lawn mower, it is worth paying little attention to the fastening of the carburetor, adapter and their germet

Vibrations that take place in the process of operation of the lawn mower can lead to a reservoir.

Incorrect adjustment of the lawn mower can be fixed by simply adjusting it in accordance with the requirements specified in the operating instructions.

In addition, sometimes gasoline trimmers for grass can stall due to the fact that the valve located in the gas tank lid just clogged or sticks.

To find out, try using a braid by loosening the gas tank cover.

If in this mode the device works properly, clean the valve.

over, the lawn mower can stall due to poor fuel flow into the carburetor

The reason for this is that at first the fuel gradually falls into the carburetor and is enough for work with increased power.

However, then it is produced and at large speeds the engine begins to stall.

As for the carburetor, here the problem may also be that its body is too pulled.

The reason that the lawn mower stalls at high gas speeds may also be an air leak.

We are talking about the possible presence of a place through which air can pass during the heating process of the engine.

Among other things, do not forget to check the fuel intake hose. For some reason it is somewhere 5 times, the Trimmer is working for idle for the grass Stern GGT950B. The problem may be that it is weak or cracked at all.

Benzotrimmer does not work at the EVDIRAL.Ru

When purchasing a lawn mower, you must be prepared for the fact that, as in all other similar tools, breakdowns may also appear in it that will require repairs.

But do not immediately run to the service center and pay big funds to the craftsmen who convince you of the presence of severe malfunctions in the device.

The lawn mower stalls at high speeds

Perhaps more and more a widespread complaint associated with gasoline trimmers sounds like this: “The lawn mower stalls”.

Naturally, a rather harsh fault may be a prerequisite for this. How to adjust the carburetor at idle does not work. On the Forward Boistorose, even at idle (the benzotrimmer shaft all the time spins even on. The lawn mower stalls at idle. The Benzotrimmer system and the lawn mower system does not work. But in most cases, the situation is even easier than it seems to be the 1st gaze.

In order to cope with such an inconsistent, first, try to deal with its causes without the help of others, because, having found out the reason, it’s even easier to fight with the inconsistency, and from time to time it is even self.destructive.

In fact, circumstances, this is when the lawn mower stalls at high speeds, there are quite a lot of these circumstances.

Another is the presence of defects in the power system.

In this case, the lawn mower will stall at idle. For what reasons STIHL 180 stalls idle or complete gas at least some kind of tool is able to break and the Stihl MS 180 chainsaw is not an exception. The lawn mower does not work at idle. Dilems with the power system may lead to a drainage or incorrect adjustment of the carburetor.

Chinese lawn mower is not idle,-the prevention of the carburetor adapter / BC330 Repair

When it is hard to start a lawn mower, it is worth paying slightly attention to the mounting of the carburetor, adapter and their germet

Do not work idle

Vibrations that take place in the process of operation of the lawn mower can lead to a reservoir.

Incorrect adjustment of the lawn mower can be fixed by simply adjusting it in accordance with the requirements specified in the operating instructions.

In addition, sometimes gasoline trimmers for grass can stall due to the fact that the valve located in the gas tank lid just clogged or sticks.

To find out, try using a braid by loosening the gas tank cover.

If in this mode the device works properly, clean the valve.

over, the lawn mower can stall due to poor fuel flow into the carburetor

Why then the device starts up, ask you?

The reason for this is that at first the fuel gradually falls into the carburetor and is enough for work with increased power.

However, then it is produced and at large speeds the engine begins to stall.

As for the carburetor, here the problem may also be that its body is too pulled.

The reason that the lawn mower stalls at high gas speeds may also be an air leak.

We are talking about the possible presence of a place through which air can pass during the heating process of the engine.

Among other things, do not forget to check the fuel intake hose. The engine idle engine is unstable for the engine is not required for. The trimmer for the grass does not gain momentum, the lawn mower is idling at idle. The problem may be that it is weak or cracked at all.

These are the main reasons why the gas mowl can stall.

The reasons that the trimmer for the grass does not develop momentum

External signs

The reasons are that the lawn mower is not gaining momentum, vary. Some are not even related to the breakdown of the device, for example:

• Getting on the filter of dirt or dust.
• Pouring low.quality fuel mixture.
• Using poor gasoline or overdue oil.
• Pollution of the engine components, which does not allow the instrument to gain momentum.

In the case of pollution on the carburetor, he sees a lot of soot. It is the reason that the trimmer for the grass does not gain momentum.

Internal problems that the gasoline trimmer for grass does not develop momentum

Technical malfunctions are manifested in both old and new devices. Do not be surprised. even a new trimmer engine for grass may not develop revolutions. Check the ignition system and supply of the mixture for serviceability:

• Когда коса для травы заводится и тормозит или даже не заводится, то проблема может быть в свече. A dark carrion appears on it. a sign of poor.quality gasoline and poor carburetor work.
• A flooded fuel hose is another problem due to which STIHL is not gaining momentum.
• With prolonged work without cleaning parts, a muffler can clog. Check the system for the presence of dark particles and clean the pipe, then the motor will start and start working as a new.

If the problem is in the motor itself and you do not know what else to do, be sure to take it to any master. You are unlikely to do something inside the motor, all the more right. And you will always have time to harm the device.

Serving parts of a benzotrimmer to prevent a problem

In order not to in vain to disassemble the motokos, it is worth diagnosing each zone separately. the problem can be in both one and several parts. Where to look and what to check.

Carburetor

One of the main nodes of the correct work of the trimmer for grass. So that the part functions as necessary, adhere to the conditions:

• Each month to remove and clean the part;
• Configure idle, according to the manufacturer’s instructions;
• If you yourself cannot set up. take the master.

One of the popular reasons for the breakdown of the motor. the carburetor cable is not pulled. To eliminate the problem, you need to disassemble the carburetor first, clean it, and only then tighten the cable. Just do not overdo it so that it does not pull like a string.

It is worth checking additionally: an intake needle, a membrane, a setting lever, a damper and other components of a carburetor. They may also have problems that interfere with the correct work of motorcycles.

Spark plug

Even if you don’t know what a normally working candle should look like, just remove it, dry it and clean it with sandpaper. Return the part to the place.

You can also check the distance on the main part. Maximum. 1 mm gap between parts of the fabric.

If the candle is too black, then there is no point in cleaning it. just buy a new one and install it on the motor. Then the whole system will work with new forces.

Filtering system

The blocking of an air filter can sometimes affect work even more than problems with the candle. To check if it is a problem. run the engine with the filter removed. If you started, rinse the filtration sponge in gasoline or other moisture. And you can buy a new one. this will only benefit your trimmer.

The clogged filters do not let the fuel mixture into the motor, so it stalls or does not start. The lack of gasoline can be fixed with banal cleaning: both a filter under the lid and the filter of the fuel hose (located inside the plastic tank for fuel).

Motor malfunctions

Internal combustion engine. the basis of the operation of the gasoline apparatus. What may be wrong with him if the motor does not gain power:

• The fuel mixture is incorrectly prepared, or its expiration date has long been released;
• The piston rings broke;
• Cylinder or piston in scratches and cracks;
• The device is used without breaks.

With the repair of the motor should be careful. This is because if you incorrect all the details, then you can stay like without a trimmer for grass, and also with injuries. Trust the case to a specialist!