Kutaisi Unoa tractor replacement of the engine with Lifan. general information

Kutaisi Super 610 Unoa Tractor: Technical Descriptions, Operating Instructions

The first launch of the walk.behind tractor should be carried out subject to the following requirements:

For a full.fledged engine running.in and all units of the machine requires at least 25 hours of operation. During this period, it is strictly forbidden to use the uniform tractor at full capacity. Also, after running in, you must replace the oil in the engine crankcase. During the operation of the unit, it is necessary to regularly maintain its maintenance, and during storage in the winter, observe all measures and requirements of conservation.

Kutaisi Unoa Super 610 engine replacement

Many farmers and gardeners are interested in the Unoa tractor Kutaisi Super 610, an annotation for the operation of this unit. Kutaisi motor cultivator began to be released in the 80s of the past century. They were received by the owners of small summer cottages. At the moment, the release of Kutaisi cultivators is carried out with the permission of the Italian campaign and is called Kutaisi Super 610.

The operation of the device explains that the myth of the motor.cultivator is a universal mechanism that produces any type of agricultural work. Included with the device, equipment of various types is sold, which allows the use of the unit for:

With the help of a segment mower, a motor.cultivator can mow grass. If you attach the trailer to the device, then it will be able to transport goods. The wheels, as needed, can be changed to more massive, which will ensure good passage of the unit in any type of soil.

The cultivator is adapted to at least any loads thanks to the worm gearbox and the special design of the mechanism. When plowing the earth, the cultivator can move in a short time.

If you set the goal of suspending the cultivator, a clutch lever is provided, which must be brought to a non.working position. When hilling potatoes, when the cultivator reaches the end of the bed, the leverage is performed by the mechanism to be 180º, and the unit will move in the revolutionary direction.

Kutaisi Super 610 is a device with a huge number of additional functions. Having fixed the proper nozzles, it can be adapted for cleaning the site from snow, trimming bushes, leaving the earth after digging.

Kutaisi Unoa Tractor Super 610

Preventive work and bringing the machine to working condition are exclusively in the correct centering of parts.

Technical properties of the motor cultivator Kutaisi Super 610:

• Type of transport: Unoic tractor Kutaisi Super, model 610.
• Fuel consumption 6.5 l/s.
• The rear and front checks are installed.
• cylindrical crankshaft, steel fuel tank.
• The unit is equipped with hinged equipment: a plow, a mill and a trailer.
• The cost is 60,000

Years old 30 as a motor for this common rumor, the uniform tractor installed the engine. Nowadays, there was a change of engine to the Kaluga production engine, which has:

• improved output shaft;
• metal fuel tank;
• standard muffler;
• elongated cylindrical crankshaft with a pulley.

The back cover is equipped with a ring that makes it possible to install an adapter in the center. The landing dimensions of the Alt motor and other structures differ, therefore an additional transition plate was made, which is mounted between the gearbox and the engine in addition to the already installed.

The shaft of the motor for the motor block Kutaisi Super has an oblong shape, therefore 4 flanges were installed and they have a plot of pipe welded. The unit has improved adhesion. A metal pulley is installed on the shaft of the motor. A clutch card is attached to this pulley using the washer.

We will see the assembly of the motor and its components on the example of the motor compartment of the Kutaisi Super 610 unit with the ACME Italian carburetor engine ALN-330U.

The air for cooling the cylinder flows through the air intake and is supplied with a fan-butter recorded at the front end of the elongated crankshaft and a covered casing. The rear end of the shaft is connected to the unit box. In one of the region there is a safety fence, immediately.

Kutaisi Super 610 Motor La 300

On the right side of the motor is a Magneto breaker, a horizontal carburetor and an air filter in which filter component is a mesh of kapron. The muffler is mounted behind the air filter. The engine is covered with a hood, under it is a fuel tank. The fuel line coming from the tank to the carburetor is equipped with a crane.

Which engine is suitable for the one.axic tractor Kutaisi 610?

Kutaisi Super 610 Unoa-based tractor must be equipped with an Aln-330V engine that has a conical clutch ramp. Most of the models of modern engines have straight shanks (slotted or keywords), which very limits the choice of a specific engine model for this walk.behind tractor. There are two options for resolving the issue. The first is to search for an engine with a conical clutch shaft. Among the manufacturers producing such engines, for example, you can see engines from Weima, Honda, domestic knight, bulat (and other manufacturers of the 168FB model under the cone), Kohler, and other options. A feature of all these engines is a fairly high price. On average, the price is 300-600 at.e. The least cost of domestic and Chinese engines. And of course, the price depends on the power. In your case, it is better to buy an engine at least 6.5. 7 horsepower. You can find a suitable engine from companies engaged in the sale of components for motor blocks whose offers you will find on our website.

The second option is the alteration of the existing regular clutch for the type of shaft of the selected engine. In this case, you are practically not limited by the choice, and therefore you can choose the optimal engine model, as based on the price (comparison of models and their cost can be carried out on our portal), and in suitable technical parameters (power, type of fuel, so on). There are Chinese manufacturers (for example, Lifan), under the engines of which a transition kit is provided (bought separately). In this case, it may be necessary to install an additional plate in the seat (if the engine shank is longer than the original). If you do not use the adapter, you will have to melt the clutch hole for the shaft of the selected engine. Find masters who can install any necessary engine on the Kutaisi Super 610 unoic tractor, you can from ads posted in the corresponding category of our site.

All about the motoblocks “Kutaisi

Kutaisi’s uno.ears tractor has been present in the domestic market of agricultural machinery for 30 years. The unquenchable popularity and stable demand for the unit is due to its high operational characteristics and wide consumer availability.

Peculiarities

Kutaisi motor blocks began to be produced at the machine.building plant of the Georgian city of the same name and were produced under the license of the Italian company Akme. This enterprise was well known all over the world and was engaged in the production of Goldoni garden and small agricultural technology.

After the production capacities of the plant in Georgia, local experts finalized the one.axle tractor and adapted it to difficult natural conditions inherent in most of the country. In particular, the engine ignition system was changed, the camshaft was improved and the clutch was finalized, after which the prefix “Super” was added to the name of the brand. Engineers developed a whole line of units represented by the Kutaisi Super models of modifications 600, 608, 610 and 612. However, the most perfect of all listed was the tenth model, which incorporated the best characteristics of both the Italian prototype itself and its modifications.

The scope of use of the Kutaisi Super 610 motornote is quite wide.

With its help, many agrotechnical measures can be carried out:

• plowing land;
• sowing cereals;
• harvest and snow cleaning;
• loosening;
• watering;
• transportation of goods;
• hilling;
• The mowing of the grass.

The unit can be used at temperatures from.20 to 35 degrees, which allows us to operate not only in warm times, but also in winter. Thanks to powerful rubber wheels with a deep tread, the same-based tractor is distinguished by high patency, which is why it is able to work on any type of soil. A special design and the presence of a worm reducer allow the unit to withstand any loads and move quickly enough. The advantages of motoblocks of this brand are the high reliability of the engine, transmission and chassis, strong frame and complete compatibility with all types of attachments. The pluses also include low cost and simplicity of design. In addition, the device was produced in accordance with the state standard and established itself as one of the most reliable means of small mechanization. The disadvantages include the low availability of many spare parts and the difficulty to find the operating instructions.

Specifications

The Kutaisi Unoa tractor is considered almost reliable equipment and with timely maintenance is able to work for a very long time. High operational characteristics of the equipment are due to a combination of three powerful and reliable systems: engine, transmission and chassis.

• Engine. The Kutaisi Super 610 unit is equipped with an ALN-330 gasoline four-stroke engine, 327 cm3 and a capacity of 5.4 liters. With. In equivalent, this is 4.8 kW, which is a good enough indicator for the technique of this class. The engine has an air cooling system, which is why it is recommended to take regular breaks when working in hot times and let the motor cool. Otherwise, the equipment will work for wear and quickly fail. The engine is performed using a hand starter.
• Transmission. A gearbox that has three front and one rear gear is installed on a one.axle tractor. This favorably distinguishes “kutaisi” from most analogues with only 3 speeds. 2 front and rear. The maximum speed of the motoblock movement is 10 km/h, which allows you to use the unit as a full.fledged small.class tractor for transporting various agricultural goods weighing up to 0.5 tons. Gear shift, as well as turning on the reverse using the lever system.
• The chassis is represented by a powerful steel frame that can withstand heavy loads and adapted for all types of additional equipment. The uniform tractor is equipped with high wide.profile wheels of 4×10 size, which provide the ability to work on complex soils and prevent the car with bogging or steer in the ground. Special chain rims with the plates located on them are installed as soil.bends on the native wheels of the unit. Thanks to such devices, there is no need for a complete replacement of native wheels with metal, which greatly simplifies work with the walk.behind tractor.

The unit has a dependent type of drive and bar control, which allows adjusting up to 180 degrees in vertical and horizontal planes. The capacity of the working tank of the walk.behind tractor is 0.75 liters, the capture width during soil processing varies from 56 to 61 cm, and the weight is 105 kg. The power of power selection has lever control, which allows you to attach any attachments to the unit. A powerful plate of cast iron, weighing 20 kg and located under the engine block, acts as a weighting agent.

Review of attached equipment

Cutters

Kutaisi’s uno.based tractor comes complete with 4 cutters of saber.shaped, which are able to process the soil in a width of 1 m and at a depth of 12 cm.

The cultivation of soil is carried out with the aim of enriching it with oxygen, giving uniformity and loosening.

This attachment equipment is used in situations where soil milling does not help due to the hardness of the breed. The plow allows even the virgin lands to cultivate. Mills in such situations will simply jump the soil and will not be able to plunge into the ground.

If we compare the plow and mills, the former have much less capture width and they have to work longer, but the one.axic tractor Kutaisi 610 will behave much more stable.

Braids

Kutaisi motoblocks will help their owners in cleaning the territory and maintaining it in order with the help of mowers.

These devices support the work with both rotary and segmented options for this attachment equipment.

Rotary mowers allow cleaning rough grass and small shrubs. Segment options are used if necessary to cut medium.sized shrubs and young shoots of plants.

Potato.cutter, potato.aditch and cun

Automation of work with potatoes occurs using potato.coats and potatoes. They allow you to sow and collect cultures.

The hip is used to care for potatoes during its maturation.

Snowman and dumplings

Motoblocks of the Kutaisi brand will help in snow cleaning with snowpocking equipment: snowbrushes and dumps-lobes.

Wheels, soil.bearing and caterpillars

High.quality tires are installed on Kutaisi motor blocks that can provide patency during work.

If necessary, you can install soil.spaces on top of the tires, thereby providing additional adhesion to the surface.

When working or moving in a swampy area, the Kutaisi motornote can be installed, which improve adhesion by increasing the clutch area with the surface.

Tears

The mass of the Kutaisi motor unit super is 105 kg. If the weight of the device is not enough, then two weights of 15 kg are included in the delivery kit, and cast.iron engine protection from below 20 kg, which can easily be removed.

Trailer

Kutaisi brand motoblocks can transport goods using trailers. The choice of their configuration should depend on the cargo that will be transported:

• Self.sewing (used in the transportation of bulk cargo);
• With high sides (used for transportation of volumetric goods);
• Long trolleys (carry logs of trees and pipes).

Adapter

This trolley is a rigid frame with a seat that allows you to control a machine from a sedentary position.

User manual

This is the main document that allows you to study the design of the brand of Kutaisi, the safe use, maintenance and repair of this equipment. The electronic version of the user’s management is presented here:

First launch, running.in and conservation

Now it is problematic to find a new one.based Kutaisi tractor, in connection with which used model is more in demand. But if you are lucky enough to become the first owner, then you need to correctly begin its operation:

• Collect the device in accordance with the instructions for use;
• Pour oil and fuel into the corresponding compartments;
• Run.in (use a single tractor with a minimum load for 8 hours);
• Replace the engine oil.

Service

Kutaisi motor blocks were released in the USSR, and to maintain them in working condition, it is necessary to carry out regular maintenance in accordance with the operation instructions.

Before each exit, you should inspect the car for an unnatural position of parts, lack of oil leaks and engine performance.

Replacement of motor oil should occur every 25 hours of operation. It is recommended to pour any lubricants for four.stroke engines of small garden equipment with 4T marking.

In the transmission node you should change the oil after 100 hours of operation. Tap-15V must be poured into this knot.

GPP switching levers should be lubricated with waterproof lithium or calcium grease.

After completion of work with the Kutaisi motornote, it is necessary to remove the remaining dirt and dust from the device and attachment equipment in order to prevent the start of rusting the machine.

Repair of the main malfunctions

Kutaisi motoblocks come from the USSR and are distinguished by excellent maintainability. Spare parts for these machines can always be found in any specialized market, or find an ad on special forums.

If the machine engine starts with difficulty or during operation stalls:

• Check the amount of oil and fuel, share if necessary;
• Inspect the spark plug, remove the carbon from it or replace it with a new one;
• Check the connection of terminals to the spark plugs and whether there is a spark;
• Clean air and fuel filters, they must be cleaned every 50 hours of operation;
• Adjust the fuel mixture in the carburetor;
• If more complex breakdowns occur, it is recommended to contact the service center.

If during operation the one.axic tractor Kutaisi vibrates too much:

• Check the aggregation of attaching equipment;
• Make sure of the protracted of the bolt compounds on all nodes;
• Check the quality of the fuel, and whether there is water in it;
• Clean air and fuel filters.

User manual

This is the main document that allows you to study the design of the brand of Kutaisi, the safe use, maintenance and repair of this equipment. The electronic version of the user’s management is presented here:

First launch, running.in and conservation

Now it is problematic to find a new one.based Kutaisi tractor, in connection with which used model is more in demand. But if you are lucky enough to become the first owner, then you need to correctly begin its operation:

• Collect the device in accordance with the instructions for use;
• Pour oil and fuel into the corresponding compartments;
• Run.in (use a single tractor with a minimum load for 8 hours);
• Replace the engine oil.

Service

Kutaisi motor blocks were released in the USSR, and to maintain them in working condition, it is necessary to carry out regular maintenance in accordance with the operation instructions.

Before each exit, you should inspect the car for an unnatural position of parts, lack of oil leaks and engine performance.

Replacement of motor oil should occur every 25 hours of operation. It is recommended to pour any lubricants for four.stroke engines of small garden equipment with 4T marking.

In the transmission node you should change the oil after 100 hours of operation. Tap-15V must be poured into this knot.

GPP switching levers should be lubricated with waterproof lithium or calcium grease.

After completion of work with the Kutaisi motornote, it is necessary to remove the remaining dirt and dust from the device and attachment equipment in order to prevent the start of rusting the machine.

Repair of the main malfunctions

Kutaisi motoblocks come from the USSR and are distinguished by excellent maintainability. Spare parts for these machines can always be found in any specialized market, or find an ad on special forums.

If the machine engine starts with difficulty or during operation stalls:

• Check the amount of oil and fuel, share if necessary;
• Inspect the spark plug, remove the carbon from it or replace it with a new one;
• Check the connection of terminals to the spark plugs and whether there is a spark;
• Clean air and fuel filters, they must be cleaned every 50 hours of operation;
• Adjust the fuel mixture in the carburetor;
• If more complex breakdowns occur, it is recommended to contact the service center.

If during operation the one.axic tractor Kutaisi vibrates too much:

• Check the aggregation of attaching equipment;
• Make sure of the protracted of the bolt compounds on all nodes;
• Check the quality of the fuel, and whether there is water in it;
• Clean air and fuel filters.

Reviews of the owners

Here’s what they say on thematic forums regarding the experience of using the Kutaisi motornote:

Boris:

“Kutaisi attracted me with its reliability, simplicity and performance. Its design has already withstood many years, which means that nothing new in it will break, and the solution to any problems can be found on the forums. I immediately took two, so that one was under spare parts. There are quite a lot of work on it: sow, plow, water, etc.D. And the potato.captable and potato.resident is generally invented by a genius! The engine left his native, it seems to me more reliable than Chinese consumer goods.

Pros: penny price, high performance, maintainability.

Cons: A lot of time needs to be given repairs “

Overview of the work of the Kutaisi motornote with a Schnek snowman

Overview of the work of the Kutaisi motornote with a rotary lawn mower

Vasily, 33 years:

“I found“ miracle technology ”in the barn with his grandfather, as I understand it, after the examination, the same tractor has not been used for more than 10 years. Nearby lay soil.spaces, mills, coupling and even trailer. Curiosity and excitement took their own and after a month and a half of recovery work, the same.based tractor earned. I, of course, replaced the engine, put Honda. I went through, cleaned where I needed to grind, wrapped it. no one in the district has such an assistant, so that, that he went the thirtieth dozen!?””

Peter, 41 years old:

“I deliberately searched precisely Kutaisi Super 610. I remember him since childhood. my father went like that. Reliable, unpretentious, productive, withstanding both snow and rain and snowstorm. I bought two at once, in order to restore one. There was a lot of work, but the result was satisfied. And plows and sow, waters, with potatoes generally helps out. they forgot about “related” diseases. The engine also changed. so there will be fewer problems in maintenance, Honda is easier to maintain, there are spare parts, there is fuel, all oils “

Alexander, 39 years:

“My father has such a single tractor in the village for the 20th year, probably. His father periodically repairs him, but the breakdowns are frivolous (pulley, candle, carburetor bulkhead). A very strong one.axle tractor, takes any soil, moves forward confidently. Father is advised to change the engine, but while he is resisting, he rides to Aln30. There are almost all the canopies-both a mower, and a pump, a snowman (manually made), all diggers-sagging. A plot of 32 acres is served without problems. Great unoic tractor, if you get. take it, you will not regret.””

All about the motoblocks “Kutaisi

Kutaisi’s uno.ears tractor has been present in the domestic market of agricultural machinery for 30 years. The unquenchable popularity and stable demand for the unit is due to its high operational characteristics and wide consumer availability.

Instruction manual of the motor unit Kutaisi Super 610

Many farmers and gardeners are interested in the Unoa tractor Kutaisi Super 610, the instructions for the operation of this unit. Kutaisi motor cultivator began to be released in the 80s of the last century. They were acquired by the owners of small summer cottages. Now the release of Kutaisi cultivators is carried out under a license of the Italian campaign and is called Kutaisi Super 610.

The instruction manual of the motor unit Kutaisi Super 610: We disassemble thoroughly

Kutaisi’s uno.ears tractor has been present in the domestic market of agricultural machinery for 30 years. The unquenchable popularity and stable demand for the unit is due to its high operational characteristics and wide consumer availability.

Automation of work with potatoes occurs using potato.coats and potatoes. They allow you to sow and collect cultures.

The hip is used to care for potatoes during its maturation.

Kutaisi Unoa Tractor 610 Super

This machine was successfully used in all the open spaces of the USSR to automate agrarian work using special attachments. This is not just a cultivator for plowing and cultivating the garden. This is a full.fledged assistant in agricultural affairs, who is able to take care of agricultural crops, produce herbal bevel, snow removal and transportation of goods.

Kutaisi’s unoic tractor 610 Super is capable of processing any type of soil, including virgin. It supports work in all climatic zones at ambient temperatures from minus 20 ° C to plus 35 ° C.

Engine

Kutaisi Unoa Tractor 610 Super is equipped with a gasoline engine Aln 330. Its power reaches 5.4 liters.With. (or 4.8 kW). The engine temperature is maintained in the working range using air cooling. However, it does not always cope with the loads, and it is recommended to make stops in work in a couple of hours in order to let the motor cool down.

Motor starting is carried out using a hand starter.

Transmission

Kutaisi’s uno.ears 610 Super is equipped with a four steps (three forward and one reversal). The largest transportation speed is 10 km/h.

VOM allows you to control the speed of attachment equipment using lever control.

Design features

The height of the handle can be adjusted not only in an upright position, but also turned left or right by 180 °.

The fuel tank is made of steel and allows you to protect it from mechanical influences or random breakdown.

High broad.profile tires of 4 × 10 will provide perfect patency of the device for any soil. The manufacturer also thought out a special steel rim with inserted plates, which are hung on top of the wheels and are soil.bearing.

The equipment of the walk.behind tractor includes the machine itself, mills, soil.bearing and wheels.

Specifications

Review of attached equipment

Cutters

Kutaisi’s uno.based tractor comes complete with 4 cutters of saber.shaped, which are able to process the soil in a width of 1 m and at a depth of 12 cm.

The cultivation of soil is carried out with the aim of enriching it with oxygen, giving uniformity and loosening.

This attachment equipment is used in situations where soil milling does not help due to the hardness of the breed. The plow allows even the virgin lands to cultivate. Mills in such situations will simply jump the soil and will not be able to plunge into the ground.

If we compare the plow and mills, the former have much less capture width and they have to work longer, but the one.axic tractor Kutaisi 610 will behave much more stable.

Braids

Kutaisi motoblocks will help their owners in cleaning the territory and maintaining it in order with the help of mowers.

These devices support the work with both rotary and segmented options for this attachment equipment.

Rotary mowers allow cleaning rough grass and small shrubs. Segment options are used if necessary to cut medium.sized shrubs and young shoots of plants.

Potato.cutter, potato.aditch and cun

Automation of work with potatoes occurs using potato.coats and potatoes. They allow you to sow and collect cultures.

The hip is used to care for potatoes during its maturation.

Snowman and dumplings

Motoblocks of the Kutaisi brand will help in snow cleaning with snowpocking equipment: snowbrushes and dumps-lobes.

Wheels, soil.bearing and caterpillars

High.quality tires are installed on Kutaisi motor blocks that can provide patency during work.

If necessary, you can install soil.spaces on top of the tires, thereby providing additional adhesion to the surface.

When working or moving in a swampy area, the Kutaisi motornote can be installed, which improve adhesion by increasing the clutch area with the surface.

Tears

The mass of the Kutaisi motor unit super is 105 kg. If the weight of the device is not enough, then two weights of 15 kg are included in the delivery kit, and cast.iron engine protection from below 20 kg, which can easily be removed.

Trailer

Kutaisi brand motoblocks can transport goods using trailers. The choice of their configuration should depend on the cargo that will be transported:

• Self.sewing (used in the transportation of bulk cargo);
• With high sides (used for transportation of volumetric goods);
• Long trolleys (carry logs of trees and pipes).

Adapter

This trolley is a rigid frame with a seat that allows you to control a machine from a sedentary position.

This is interesting: how to make a minister from a walk.behind tractor with your own hands

Review of the lineup

The Georgian Machine.Building Plant produced a series of modifications of the Kutaisi motoblocks:

However, the most popular motoblock model is Kutaisi Super-610.

Kutaisi Super-610

This unit is intended for all types of agricultural work with the participation of various attachments. With it, you can not only plow and cultivate, but also plant, hill, harrow, dig, water, transport goods, mow grass, remove snow and much more.

The unit has proven itself perfectly on clay, loamy, sandy soils and chernozem.

It copes with the treatment of virgin lands. The same.based tractor is prepared for various climatic conditions, neither atmospheric precipitation nor temperature changes are terrible for it.

The gasoline four.stroke power plant Aln 330 with the lower valves has a capacity of 5.44 horsepower (4.8 kW). Forced air protection protects the motor from overheating, although the instruction recommends, after every 2-3 hours of operation on the walk-behind tractor, make short stops for 20-30 minutes, which will allow the engine to cool.

Kutaisi modern motoblocks are increasingly equipped with 6.5 liter Honda engines.With.

The engine is launched from a reverse hand starter.Ideal fuel for the ALN 330 engine-AI-92 gasoline. The operational mass of the walk.behind tractor is 105 kg, for the best submersible effect, there is ballast (additional load or weighting agents). two cast iron disks for 2 kg wheels and a powerful cast iron plate under the engine weighing 20 kg. All details are quickly removable.

The kit includes pneumatic wheels with a wide agricultural protector that increases the cross.scale of the walk.behind engineer.

The depth of cultivation with cutters (4 pcs in the set of saber.shaped) reaches about 12 cm. For ease of work, there is an additional transport wheel.

Four.speed transmission, there are three front speeds and the back gear. Control control is adjustable in two planes (vertical and horizontal up to 180 degrees). There is a shaft of selection on lever control, which allows to attach any attachments to the walk.behind tractor. The package includes universal hitch, milling cutters, soil.bearing, trailer and wheels.

Characteristics

Non.mounted equipment

Kutaisi units are multifunctional agricultural devices, with a huge spectrum of work performed. All additional options are possible with the participation of the following attachments developed by the Kutaisis machine.building plant:

Frases. A device designed for loosening the soil. Cutters are Sable.shaped and “goose legs”. The number of knives on one milling cutter can vary from 3 to 4. For Kutaisi, saber-shaped M-shaped mills 21m were originally used.

Cutters saber.shaped mills goose legs

Mowel segment mower rotary mower frontal terminator

Modern developments made it possible to attach the following awnings.

Brush Shovel-Ottal Snowman

Vibration-groof potato-cutter KM-1 potato trailer

The Unoa Tractor Kutaisi

Goldoni Jolly Junior 44, Meccanica Benassi, Goldoni, Lombardin of their domestic clones Kutaisi 610, Neva Super.

Dmitry Sedov recording is fixed

I am preparing for the snow winter! The same.based tractor has not yet been assembled and the dump is already ready. What do you think the mount will withstand on a walk.behind tractor?

Sergey Alekseev recording is fixed

Sergey Alekseev

Alexander Panshin recording is fixed

Hello. Selling an engine from Kutaisi is a worker, dear, spare parts for it. There is also a cultivator. The price is contractual.

Ruslan Minosyan Record is fixed

Selling everything in the photo.A braid for grass on the bolts, the corps Kozet Buck Goldonnikppe, the Corpolarb, assembled, the steering wheel with mounts in the kit is completely ordered. Shipwater checkpoint pair of wheels with hubs and diploma of the gearbox cover Turnpile forking the transmitter of the goldoniesheld on trifles.