Lubrication of a trimmer for grass for grass forester. Review

TOP-3 best trimmers for grass forester in characteristics: review, price, video life hacks

A flood for a trimmer for grass is a coil, inside which a fishing line is placed for a trimmer. Two or more of its ends are located outside, and it is they who cut the grass.

The length of the fishing line is usually 8. 15 m. As it is worn out or when cutting off when colliding with a hard object, a fishing line for a trimmer is again stretched out the necessary length.

By the method of supplying the cord, trimmer heads can be manual, semi.automatic and automatic. Using the first, you will have to “lengthen” the fishing line for the trimmer with your own hand. For the second there will be a fairly light blow of a trimmer head on the ground. So you will click on a special button that is responsible for feeding cutting equipment. Automatic devices lengthen the “antennae” themselves, as soon as they become too short.

Some trimmered bobbins have ball bearings that help increase their service life. There are also heads with plastic knives. This allows you to cope even with hard weeds.

The coils differ both along the fastening axis, and in the diameter of the cord used, and according to the type of thread. Accordingly, the bobin of one manufacturer is not suitable for equipment another brand. Therefore, when choosing, it is important to know exactly the model of your trimmer for grass. Typically, manufacturers indicate for which KOS this or that equipment is suitable, thereby facilitating your searches.

How to disassemble a trimmer for grass forester p 108

Category

This characteristic indicates what is the thickness of this cutting element used in one or another trimmer head. Effectively cut the grass with an inappropriate fishing line will not work. A smaller way to wear out and demand frequent replacement faster. Large “increase” the load on the engine, which can lead to its breakdown. In addition, such a fishing line for a trimmer will not be able to properly serve from the trimmer head-due to its constant stuck, the operator will have to very often be distracted from work.

I served little

The gasoline trimmer for the grass “Forester 304” was used for two years in the spring, summer and a little a little autumn. At first, a trimmer for grass worked perfectly at once, he needs to pull the cord there to drive a motor, a trimmer for the grass “Forester 304″.

We have been using the Lesnik gasoline trimmer for the third season, during which time there were no failures in work and complaints. This mitch is light and convenient to use, the kit includes a shoulder belt. Like what is in it.

Budget trimmer for grass

I bought it in 2015 in my opinion, there was a promotion in Leroy Merlin, it cost 2000r., At first I thought that the bullshit, while I was walking around the store left very few, were disassembled like hot pies, well, I, too.

Best BRUSH CUTTER Blade for a Weed Wacker! Chainsaw Blade. Chainblade

We bought in the summer of 2016, since it was necessary to raise the plot (a lot, virgin lands), respectively, free it from the grass. For two seasons, I dragged a total of 10 acres per season, after which the carburetor was dead. However.

The clogged exhaust motorcycles

Since oil is present in gasoline, it burns and releases a lot of burning, which is postponed in the muffler and graduation window. On some trimmers, a mesh is installed. a flame arrester, it also needs to be cleaned. Muffler either change or try to burn.

If everything is in order with the motor and spark, let’s try to start. We recommend that you sprinkle the carburetor cleaner into the combustion chamber, under a candle or in the carburetor window. The motor will start and most likely stall, repeat the operation several times. If nothing helps, you need to try to clean the carburetor.

User manual

Before starting work with the device, you need to familiarize yourself with the instruction manual. This document is attached to all products. The main provisions of the leadership are:

  • User security.
  • Assembly and the first launch of a trimmer for grass.
  • Maintenance rules and its frequency.
  • Features of working with the product.

Before starting work, you need to make sure that all the details of the tool are intact and work properly. Next, the operator should wear protective clothes, glasses and headphones. this will do work with a trimmer secure.

During operation, it is recommended to monitor the quality of the mowing and the degree of engine heating. After completion of work, it is recommended to conduct an inspection of the equipment and replace the failed parts (if necessary).

As an oil, the manufacturer recommends using oil for two.stroke engines. If it is necessary to replace the failed parts, go to the Gardentraiding service center. The list of service centers are indicated on the official website of the company.

Review: gasoline trimmer for the grass “Forester 304”. Good, reliable, time.tested.

The fight against grass on the garden plot is one of the main problems, there is one that can be pulled out or reassured, but there is grass for which it is necessary, something serious At present, a wide selection of lawn mowers (trimmers) is presented, both electric and gasoline. Electric electrical in circulation, but their radius of their actions is limited by the length of the cable and if there is a need to “fight” the grass away from the outlet, it is better to use a gasoline trimmer. When buying a summer assistant, his choice was made in favor of a gasoline trimmer for the Forester 304 grass, the production of the assembly of Chinese comrades, by the way, was made, does not cause any complaints. The choice in favor of a portable trimmer for grass was also made due to the need to mow not only lawn grass, but also a large weed (wormwood, burdock) on a relief area where the mobile apparatus was. would not be in place.

“Forester” successfully copes with its task, for industrial purposes it is of course weak, but for the home just right. In addition, its cost is 3.5 thousand not much reflected on the family budget. Technical characteristics of a gasoline trimmer for the grass “Forester 304”:. power 1.3 l/s;. Weight 5.5 kg. rotation frequency 8000 rpm. Moving diameter 38 cm. Handle j. figurative,

lubrication, trimmer, grass, forester, review

The principle of operation is simple, first we prepare the fuel mixture, dilute the special oil,

intended for two.stroke engines, with AI gasoline. 92 in a ratio of 1:50, refill and go.

It is necessary to use a protective mask, since stones and pieces of grass can injure to a face. It is best to use closed shoes and trousers. For all the time of operation (3 years), the Forester 304 showed itself on the good side, the only one had to replace the coil, which contains a fishing line for a trimmer, there are no other complaints to the work of a trimmer for the grass.

During work, the fishing line for the trimmer will also be spent in order for it to advance, it is necessary, while working, slightly press the trimmer with a trimmer for grass on the ground. In addition to the fishing line, a knife is included, but I did not use it. A big plus of a trimmer for grass is that it is versed in two parts, it is convenient to transport a car in the trunk.

The gas is placed on the bar, which at first glance may seem uncomfortable, but you quickly get used to this position.

A more comfortable location of the gas on the remote handle costs 2 thousand. expensive. A trimmer for the grass starts quickly, not whimsical in maintenance. If you still have a choice dilemma, then consider this budget option. a gasoline trimmer for the grass “Forester.304 “, reliability tested by time.

Review: Electric trimmer for grass Forester P108. Convenient, budget option.

Etletric trimmer for the grass “Forester” P108 was bought by me at the end of August 2015, in the Leroy Merlin store. Choosing a trimmer for grass for grass through the Internet, I had a theoretical representation about these devices, so the opportunity to hold them in my hands, inspect and evaluate them. I twisted in my hands products of different companies and Flymo, Sun Garden, MTD, Makita and others. All of them are made, as under a carbon copy, differed only in valuable and appearance. The for some products were quite high. Comparing the technical characteristics and the appearance of this “forester” with other units. to be honest, then nothing special, the same Chinese, only I decided to purchase a cheap apparatus and, in case of failure, simply replace it with another.

Specifications. declared by the manufacturer of an electric trimmer for the grass “Forester” P 108: engine power: 1200 Watt.grown rotation, rpm.: 12,000 in the drive: flexibleDiameter of cutting fishing line, mm: 2.0. Noise level, db (a): 96, diameter of the cutting knife, see: 23. The weight of the box along with all components is about 8 kg.

There was a set of simple tools for the trimmer: the end keys of the hexagons, a universal combined key-wrench, a plastic key for removing a trimmer head, a pair of track keys and instructions in Russian.The first trimmer test for the grass was successful! When you mow a trimmer with a knife, from right to left, the grass is cut off and in an even layer lies on the ground.

For soft, low grass, use a fishing line for a trimmer (buy separately).For the elderly, this trimmer for the grass will be heavy, I do not recommend. The unit is not very strong, tolerant. You have to rest often, because the finger is tired all the time to press on the button.

A grease for a trimmer for grass should be bought a high.temperature. The impressions of this unit are double. The trimmer for the grass completed the firm “fourth”: the plot was dragged, Buryan won, cut off the shoot. Personally, I have not regretted the purchase yet. I recommend.

Reviews and prices

The average cost of various modifications:

Forester-304 Forester-305 Forester-P108
5 700 5 600 4 800

Dmitry, 22 years old, “This is a compact, reliable and convenient motorcycle operation. I have been using model 304 on a small garden plot for the second year. Of the shortcomings, I can only note the poor.quality plastic from which the fishing line coil is made “.

Roman, 36 years old, Magnitogorsk: “A few months ago I bought a model 304 for 5,000 for a summer cottage at first the device started the first time, but after 2-3 weeks it was necessary to make a lot of effort to start this unit”.

Mikhail, 39 years old, Tver: “For several seasons in a row, I have been using a model of a trimmer for grass 305. Of the advantages, I can note a low noise level and a small gasoline consumption. Disadvantages: unreliable attachment of rods to each other, as well as a poorly made shoulder belt “.

Igor, 41 years old, Ryazan: “This is a simple and inexpensive trimmer for grass, which is suitable for processing small areas. I bought this equipment 3 months ago for 5,500 in order for the engine to start the first time, I recommend that you pump the system before each use ”.

Oleg, 43 years old, Saratov: “Equipment is suitable only for processing a small territory, t.to. A too weak engine is installed here. I bought a forester-P108 in 2014 for 4,000 for 4 seasons squinted about forty hundredths, after which the carburetor failed. From the minuses I can note a large fuel consumption for such low.power equipment “.

What tool for cutting grass do you use? What problems during work are most often encountered?

lubrication, trimmer, grass, forester, review

Electric trimmer for grass vibrates

Many mowing users noticed that some time after the start of the apparatus, it begins to vibrate very much. On some trimmers, mainly in models more expensive, an anti.vibration system was installed in the form of shock absorbers seized between the engine and the bar. But in some cases, even she does not save from strong vibration. The reason that strong vibration appears in the trimmer, there may be a small amount or complete absence of lubrication on a hard or flexible shaft located inside the rod of the apparatus.

Replacing the lubrication of the hard shaft is as follows:

  • Apply a small amount of lubrication to the shaft and evenly smear it along the entire length of the part, including the slots at the ends of the rod (if they worked, the shaft will have to be replaced);
  • After lubrication, insert the shaft back into the bar and put the gearbox in the same place.

The lubrication of the flexible shaft is as follows:

  • unscrew and remove the mowing head;
  • remove the bar from the electric motor by unscrewing a couple of bolts;
  • Pull out a flexible cable from the bar;
  • Lubricate the cable with grease along the entire length.

This is done like this: first you need to lubricate the end of the cable, and then insert it into the bar, after which, as it moves into the pipe, you should apply grease to the part and evenly distribute it on the surface. Then insert a bar with a flexible shaft into an electric engine and fix it.

In the event that the lubricant did not help, and the vibration continues to appear, you will need to change the flexible shaft.

Benzocosa management

The trimmers presented today on the market for ICE grass are equipped with a D-shaped, U-shaped or T-shaped handle, where the main controls of the unit are located. For example, in a spit with a U-shaped handle key and a “stop/start” toggle switch are located on the right handle. In the D-shaped version of the gas control key, the gas adjustment key is located directly on the bar.

Electric trimmer for grass vibrates

Many mowing users noticed that some time after the start of the apparatus, it begins to vibrate very much. On some trimmers, mainly in models more expensive, an anti.vibration system was installed in the form of shock absorbers seized between the engine and the bar. But in some cases, even she does not save from strong vibration. The reason that strong vibration appears in the trimmer, there may be a small amount or complete absence of lubrication on a hard or flexible shaft located inside the rod of the apparatus.

Replacing the lubrication of the hard shaft is as follows:

  • unscrew the gearbox located at the bottom of the bar;
  • After removing the gearbox, you will see the end of the shaft, for which you need to pull to extract the part;
  • after extracting the shaft, it must be abundantly lubricated with a special lubricant “Shrus-4” or ordinary-“Litol-24”;
  • Apply a small amount of lubrication to the shaft and evenly smear it along the entire length of the part, including the slots at the ends of the rod (if they worked, the shaft will have to be replaced);
  • After lubrication, insert the shaft back into the bar and put the gearbox in the same place.

The lubrication of the flexible shaft is as follows:

  • unscrew and remove the mowing head;
  • remove the bar from the electric motor by unscrewing a couple of bolts;
  • Pull out a flexible cable from the bar;
  • Lubricate the cable with grease along the entire length.

This is done like this: first you need to lubricate the end of the cable, and then insert it into the bar, after which, as it moves into the pipe, you should apply grease to the part and evenly distribute it on the surface. Then insert a bar with a flexible shaft into an electric engine and fix it.

In the event that the lubricant did not help, and the vibration continues to appear, you will need to change the flexible shaft.

trimmer for grass gasoline forester 305

Range lawn mower is equipped with a powerful two.stroke engine. Installation generates 8000 rpm at high load. A plastic casing is installed to protect the engine.

The well.thought.out brake system promotes improved operation, and a special anti.vibration system significantly suppresses vibration, riding the transition of unpleasant sensations to the operator’s hands.

The equipment consists of a fishing line contributing to cutting fine grass, and a knife that allows you to get rid of rude weeds. Thanks to the shoulder belt, the load on the back decreases.

The high quality of the assembly is pleasing, because the owners who have been held for more than one year enjoy the operational characteristics of the device, and with the help of instructions they easily figured out all the few control features.

How to adjust a carburetor on a gas tank

Before adjustment, you need to painlessly clean the filters according to maintenance in the annotation.

The upcoming setting of the carburetor of the lawn mower with your own hands is made by adjusting screws. There are three of them:

Right (l). adjustment of the fuel consistency for low revolutions.

It is necessary to find the highest speed at idle. To do this, leisurely twist the screw (l) on the right and on the left.

For adjustment, the screw is rotated by a quarter of turnover by all means counterclockwise.

Lower (t). is responsible for adjusting the motor at idle.

For proper adjustment specifically, the idle move is typical:

  • sustainable work of a cool motor;
  • not high speeds of a hot motor;
  • for a trimmer head, there is a lot of revolutions;
  • Sustainable work of the motor when changing the position (sharp rise or descent of the knife).

Left (H). adjustment of consistency at high speeds. (The screw is set up last).

The overall adjustment of the highest revolutions, the power of the motor, temperature and gas consumption depends on the left screw (H).

Setting a carburetor of a lawn mower with the last screw is carried out as follows:

  • Open the throttle to the full, at the same time give out full gas. Turn the screw clock until the time until the speeds fall (in this case, they are oriented by ear).
  • Turn the screw as slowly as possible against the hourly to the uneven operation of the motor.
  • Then turn back at all a little, having heard a measured, even work a little.
  • For a more pleasant implementation of abilities, it is more convenient to discern the work of the most experienced user:

It is curious that based on the beliefs of the creator of the video, the configuration (its correctness) is determined by the color of the candle, and not just by the turnover and stability of the motor.

True tuning the carburetor with your own hands in this case-combustion of the fuel consistency without a residue, the color of the candle should be light brown.

Trimmer Etletric for grass Forester

Since before we did not hold trimmers for grass in our hands, we began to get acquainted with the “forester” by studying the instructions for operation. The lack of a “special key to work with a trimmer head” immediately caught my eye. Well, it is not in the kit, even though you crack, and that’s it. It’s good that the head has already been collected.

The device, of course, was half.wrapped: separately an electric motor with a part of the bar, and separately the second part of the bar with the head. Plus a pen for supporting a trimmer for grass in working condition, a shoulder belt and a protective casing.

The engine of the Electrimmer Lesnik will consider all the positions that are visible in the photograph: the electric motor itself is quite heavy for the female, so we will not weed with a calm conscience that we ourselves will not rush with it on the lawns, but we will entrust this responsible operation for men. Convenient button for turning on “Protection from a fool”. There is a non.fixed button switch on top, and in order for the engine to work, you must first press and get this button, and then the main switch from below, so the unforeseen inclusions of the device are eliminated, that is, small kids will not be able to do anything with this, nor random pressing will not lead to inclusion.

The shoulder belt is frankly inconvenient. It is clearly designed for a body of a meter of two meters, and where do we need the shorties? With a minimum belt length and with a meter growth, seventy.five trimmers for the grass are still quite low for comfortable work, some of the belt has to hardly fix the wire.

lubrication, trimmer, grass, forester, review

The network cord is clearly short. The manufacturer saved on a cable meter, and now a fork with a socket should hang inconveniently with us somewhere in the armpit area.

The handle of a trimmer for grass, attached to the bar, is large and comfortable than compensates for some excessive belt length (the mitch can simply be held by the handle with your left hand). Only now to attach the pen itself to the bar, it was necessary to apply incredible efforts. The pen did not want to put on a bar. Too dense joint.

Handle and mount to the rod of the electrimmer forester

lubrication, trimmer, grass, forester, review

The joint of the transitional bar is also quite dense, the second part of the bar was inserted, also using a remarkable force, but everything has become for centuries. Just don’t forget to insert a protective casing first.

The casing should be attached to the bar next to the trimmer head using a bracket, which is already looked at the bar:

Fastening brackets to the rod and a trimmer head in the supply kit there is a hexagonal key for attaching a protective casing to the bracket. The bracket itself is made of rather soft metal, so tighten the screw carefully so as not to hush the bracket:

WOW! Hidden, Secret Greasing Spot On A Weedeater

Installation of the protective casing of the electrimmer forester my husband pulled my husband with a screw. See how the bracket bent? But we must add that even in this version everything holds very tightly.

The trimmer head and a casing assembly on the casing on the left side is visible a knife that cuts out an extra fishing line for a trimmer and leads it to the working length, so do not worry very much if you have put forward the fishing line for the trimmer with excess, the extra part will still be cut off.

That’s actually everything that was connected with the assembly of this subject. As soon as the first photos of the process of mowing the grass appear, we will immediately publish them (of course with our impressions of work).

Update: And this moment has come, so your attention is offered the first report compiled from my husband’s words (my photo):

“Since we have already experimented at home with the assembly of a trimmer for grass, it is enough to put it in the car and bring it to the cottage. It is quite placed in the car, between the seats, at least in Ford Focus 2 climbed normally. Upon arrival, we begin to prepare for mowing. Immediately use a long extension cord with a socket at the end. Having inserted the fork into the outlet, take both wires (from the trimmer for grass and from the outlet) and fasten them with electrical tape so that the fork does not jump out of the outlet.

Trimmer Etletric for the grass of a forester assembly and actually about the operation itself: the inclusion buttons are very stringent. Both the upper locking and lower engine inclusions. Fingers get tired quickly enough, therefore, as usual, Russian ingenuity went into operation: the lock button can be fixed with electrical tape, then the hands will not be tired, and the process will go much faster. The only thing. This must be constantly remembered that now the trimmer for the grass is launched by the only lower button, and act very carefully.

Fixation of the locking button of the Electrimmer forester

Well, a photo report on the work done (before mowing and after):

Country Luzhaika to mowing electrimmer

The country lawyer after mowing by the electrimmer will soon have the necessary operation: replacement of the fishing line in the trimmer

Addition from 15.05.2017 this year (and this is the third year of operation), the lower button for turning the trimmer for grass began to seize. It is necessary to press this button very much, after which a click is heard and the trimmer for the grass is turned on. over, you need to press really strongly, I could not do it at all, and my husband, while mowing, scolded everyone for a long time and masterfully. Said that it was necessary to remove the casing and look at the button, but so far there is no time for it.