Oil For Tillers. The Key To Proper And Safe Operation.

Tiller, surely is one of the most widely used types of equipment to care for your site.
With this unit you can perform a huge number of different types of work, because this technique can be easily used for plowing, weeding and watering, and for movement around the site, gathering vegetables and fruits.
In short, the technique is really great and simply indispensable for everyone who wants everything on its site to be just perfect.

Special care.

There are a large number of very different tillers, each of which has its characteristics specific characteristics and other differences, so you can choose exactly this type of equipment to care for your site, which will seem to you the most attractive.
However, it should be borne in mind that, like any other equipment, tiller Sadko, Don, Hutter, Profi, Plowman, Champion, Carver, Husqvarna, Lifan 6.5 and others need constant care, proper use and right attitude. After all, this unit is very reminiscent of a car, so care must follow.

Oil application.

For the tiller gearbox, engine, and the entire “body” to work properly and safely, it is necessary to ensure that these vital “organs” of this technology were provided with butter. Indeed, without it, the operation of such a unit is simply impossible, because oil is vital.
It is necessary for the lubrication of all moving parts of the engine and gearbox. Without it, these parts of the tiller will constantly overheat and, of course, fail, and if the driver is broken, then, of course, it will be impossible to continue working with this technique.
Also, the oil protects the engine and gearbox from dirt, debris and corrosion.
Thanks to the lubrication, the heat is evenly distributed around the engine, and is also directed downward, and not tiller in this part.
Therefore, you must take care to your machine was getting butter exactly as he needs.


Automotive oil versus special.

Oil in itself. it is a natural material, which is enriched with the necessary additives to add the required properties: viscosity, high degree of protection. Therefore, the brand of oil for tiller matters.
But, over time, various oils began to be used for multiple purposes and machine parts, which differ in their characteristics and have their characteristics. For example, the question of whether it is possible to pour automobile oil in a tiller is acutely discussed.
Now a large amount of work is performed by various agricultural units, which bring considerable relief to any farmer. Here you will learn how to make a tiller plow with your own hands.
Snowmobiles are a necessary form of personal transport in the northern regions. Yamaha snowmobiles are a real Japanese quality for the harsh Russian winter.
Acquisition of a garden sprayer will be a suitable unit for supplying plants with water. Sprayer Maroleks will be the perfect solution for your garden.
Some believe that it is better to use the recommended products for this type of technology, and some argue that automotive oils are suitable if they correspond in viscosity. You decide, but we recommend you to choose, nevertheless, specialized oils. It is our answer to the question, what kind of oil can be poured into the tiller.

Sae 10w30.

Sae 10w30 considered an excellent modern oil, which is ideal for tiller engine. In itself, the oil is universal; that is, it is suitable for all types of engines operating on absolutely any fuel.
But in the case of the tiller, this is not relevant, since the motors of these units, as a rule, run on gasoline and are not distinguished by high performance.
This oil belongs to the category of semi-synthetic and is distinguished by an excellent range of various additives that make this lubricant more than famous and popular for tillers.
Thanks to this oil, you can be sure that the engine will work for a long time and reliably, because it has antioxidant properties that protect the motor from decomposition products and stop corrosion.
Another advantage of this oil is that it allows you to work without preheating the engine. Oil for tiller sae 30 is just the perfect solution because it has a whole set of real properties.
If you do not know what kind of oil to pour into the diesel tiller, then just Sae 30 would be an ideal option. It is also well suited for gasoline.
As for the characteristics, the product different average viscosity index 152, at a temperature of 40 degrees, it is 78 ml / s, and if you increase the heating to 100 degrees, then it will be a little more than 11. For tiller, sae 10w30 oil is exposed to a good density of –872.
The minimum air temperature at which the engine starts due to this gorgeous oil is –33 degrees. It is an excellent indicator of this type of technology. This product is a rich oil for the tiller, the price of which is around 500 rubles per litre.
Given the relatively small consumption, this is enough for a long time. Of course, Sae 30 oil for tiller is an excellent solution.


Tiller gear oil is used to the gearbox worked fine. It is poured into the gearbox. There are several options for transmission oils for vehicles of this type, but it is recommended to use SAE 85w90.
This oil has a proper viscosity, which is 16.5 ml / c. This product allows you to work even at low temperatures because it freezes at.25 degrees. It is an excellent indicator, especially if one considers that tiller is practically not used in winter. Therefore, this stock you just enough.
If you still have not decided what kind of oil to pour in the tiller box, Choose exactly SAE 85w90.

For crankcase.

For tiller crankcase Caiman Vario, Patriot, Texas, Foreman, Crosser, Viking, Forza and other models, it is desirable to use those oils that are recommended by the manufacturer. As a rule, this is due to how many cylinders in the engine and what level of fuel consumption. Therefore, it is impossible to unequivocally answer the question of what kind of oil is needed for a tiller, more precisely, for its engine.
Attention should be paid to the manufacturer’s instructions so that the oil is guaranteed to fit. Sure to pay attention to viscosity and additives. Also, different types of fuel need their lubricating fluid. Sometimes it happens that oils for different types of fuel are not interchangeable.
What oil you need for tiller is for you to decide, so be careful and attentive to your technique.

How to determine the oil level?

Naturally, you do not have to change the oil in your daily tiller or top up it. But you should know about how to measure its level, to be able to correctly determine the moment when the oil level should be increased.

This procedure is performed as follows:

  • First you need to unscrew the filler cap crankcase motor tiller.
  • After that, the dipstick must be inserted into the crankcase, then examine the level at which the oil is located.
  • It should be no lower than the minimum and no higher than the maximum. To measure correctly, insert the probe as shown in the figure. Sometimes it happens that there are no marks on the dipstick.
  • In this case, make sure that the oil level reaches approximately the middle of the measuring tool. Otherwise, it is necessary to add lubricant to the crankcase.
  • It often happens that the probe is not at hand. In this case oil level can be determined by eye. Normally, the lubricant fluid in the tiller crankcase should be poured almost under the neck, that is, it should be visible. If the oil is less, then it needs to be added.
  • Screw in the filler plug of the crankcase as tightly as possible so that the oil will not in any way pour out.

How to change?

Naturally, if you see that there is not enough oil, then you need to add it. It can be done either through a funnel, or through a hose, or directly from the bottleneck into the crankcase mouth. Oil in tiller crankcase poured smoothly, without haste.

After topping, you need to measure the oil level again to make sure that it is normal. After that, the oil change in the tiller can be considered complete.

To add oil to the engine, it is necessary to tilt forward a little. To replace the lubricant in the gearbox has a special tube. Note that you do not need to turn or tilt the tiller, as this can lead to oil leakage, which can cause it to get into the engine cylinders.
The owners of tillers usually change the oil for the first time after 5 hours of work on their unit, and then they replace them every 25 hours. But desirable Change the lubricant every spring before first use.
In any case, check that the oil level is sufficient before each use of the tiller.
It is worth thinking before you turn off the oil sensor on the tiller because thanks to it, you can also monitor the level of lubricant without different tools.
As we have said, the oil level must meet two criteria: if you measured the level without a dipstick, then top up to the extent that the oil is not visible through the opening of the neck. But, in any case, it is desirable to check the level of the probe.
To do this, lower it into the crankcase and make sure it is normal. This way you can make sure that oils as much as required for normal operation unit.

Tiller faults.

Like any other product that is used for normal maintenance of equipment, oil can lead to malfunctions. Consider the most common problems that occur with engine and transmission lubricant.

Oil inside cylinder.

It often happens that during operation, tiller leans to its side. Usually, the owner does not attach much importance to this. However, it is in vain. After all, it often happens that the valve stems the oil enters the engine cylinder. Because of this, the equipment may start to smoke, which is not to please the tiller owner.
To get rid of this problem, it is necessary to clean the cylinder and candles. This problem can also be caused by the fact that the tiller was piled on its side, especially when changing the oil. Do not do this!
Oil in the cylinder tiller is an unpleasant, but easily enough fixable problem.

High oil consumption.

But what to do if a tiller eats butter in litres? Some try in this case to use a more viscous oil, but this is guaranteed not to help solve the problem. Most likely, it lies in worn piston rings. To solve it, it is enough to change the rings.
If, however, after replacing the problem has not been eliminated, you should give the unit a diagnosis because the increase in oil consumption indicates a malfunction in the work of this part of the tiller. If you do not take any measures, then soon the technician will begin to smoke, which is not good. Therefore, fix any problem on time.
If you can not do it yourself, then turn to professionals. A timely solution to any technical problem will help you save on a new tiller or engine.
And so, you decide what kind of oil you need for the tiller. It is advisable to follow the instructions if they indicate the brand of lubricant.
If not, it is better to consult with professionals. They are guaranteed to help determine which oil is better to fill in the tiller, to guarantee the protection of moving parts of the engine and transmission. Also, always make sure that how much oil is in tiller.