Power take-off shaft of the brait 135 walk-behind tractor

Tillers

Gasoline uniaxial tractor BRAIT BR-135 GES 17 HP

Characteristics and parameters
Engine Power petrol, BR192F17.0 hp
Cylinder volume 620 cm cube
Type Number of cylinders four-stroke. 1 one
Cooling Starter air
Oil sump capacity Fuel type 1.3 l petrol. AI-92
Ignition Gas / RPM control electronic on the steering wheel
Plowing width 600/1200 mm
Complete set Number of cutters with cutters / wheels 3 pairs
Milling cutter diameter Working depth 36 cm 30 cm
Rotational speeds Differential 4 forward / 1 reverse no.
Gearbox Gearbox housing gear cast iron
Clutch Power take-off disc, wet, 18 mm.
Milling cutter shaft Fuel tank hexagon S326.5 l
Steering wheel adjustment in height / angle of rotation
Wheel size 612 “
Assembly Weight PRC. 136 kg

Description

With a powerful engine, the BRAIT BR-135 GES single-axle gasoline tractor with a take-off shaft allows you to work the soil on large areas, as well as perform other work. The four-stroke engine has a maximum power of 17.0 hp, which allows you to work the soil in large areas, to carry out a large amount of work. single-axle tractor BRAIT BR-135 GES with a powerful engine has a reliable transmission, gear reducer, extended speed range 4 forward, which allows the equipment to cope with heavy loads when plowing the soil.

Tractor-type multi-disc clutch in an oil bath, all transmission elements are made in a single strong cast-iron case, power take-off shaft 18 mm.

Gasoline uniaxial tractor BRAIT BR-135 GES with a power take-off shaft to install a rotary mower, etc. output shafts for cutters and wheels in the form of an S32 hexagon. Filling volumes of the engine 1.1 l, gearbox 2.0 l of transmission oil. The width of plowing with milling cutters is adjustable to a maximum of 90-120 cm, which ensures a high speed of soil cultivation. A single-axle gasoline tractor has cutters with a diameter of 36 cm, providing a plowing depth of up to 30 cm, a set for assembling 8 cutters is included. Pneumatic wheels with a chevron protector with a diameter of 60 cm and a width of 12 cm. For more convenient control, the steering wheel can be adjusted vertically and horizontally in the angle of rotation up to 180 degrees when installing an active attachment. Universal type hitch, compatible with all carts and attachments for motoblocks from other manufacturers.

  • single-axle heavy-duty gasoline tractor.
  • Gasoline engine 4-stroke.
  • Equipment power 17.0 hp
  • Wet disc clutch in oil.
  • Transmission gear reducer.
  • Number of speeds 4 forward / 1 reverse.
  • Mechanical gearbox.
  • Power take-off from the shaft 18 mm.
  • Soil tillage with milling cutters to a depth of 30 cm.
  • Comfortable work with plows, mowers.
  • Work with active attachments through the shaft, also with carts, and other modules.
  • The complete set includes enlarged pneumatic wheels measuring 612 “, chevron protector.
  • Equipment for soil cultivation, plows, milling cutters, mainly transporting goods on carts, mowing grass.
  • Classic type hitch.

Features of the device of the Brait-135 walk-behind tractors

Brait-135 differs from its “younger brothers” in the firm in that it is heavier; equipped with efficient engines with a capacity of 9 horsepower, as well as a fuel tank with an increased (in some modifications. up to 6.5 liters) capacity.

power, take-off, shaft, brait

The wheels are installed with a large diameter, with a powerful tread of 5×12 tires. When used with a cart, the Brait-135 single-axle tractor can carry loads weighing up to six hundred kilograms. The power take-off shaft allows you to use the motor-block engine as a drive for a great variety of attachments. Hexagon. S31.

the uniaxial tractor Brait-135 is equipped with a universal hitch and is easily compatible with all types of attachments, including other brands of motoblocks (in particular, Cascade, Neva, etc.) With its increased capabilities, Brait-135, at the same time, remains a very compact and maneuverable model. Additional rubberized spacers are provided on the steering rod for improved control of the device.

Traction characteristics of the walk-behind tractor increase significantly with the use of special lugs. Overall dimensions of the Brait-135 walk-behind tractor: 1010 × 570 × 775 mm.

The 135th is the flagship among Brait motoblocks, and people recommend

The model range of Chinese motor-blocks of the Brait trademark is represented on the Russian market by a fairly wide range of compact agricultural machines. They differ in engine power and, accordingly, in their capabilities. One of the powerful and productive models in this line, designed for work in areas of medium and large areas. the single-axle tractor “Brait-135”. There are several options for the execution of such motoblocks.

The Brait trademark was registered in Russia in 2012, and since that time the company has been supplying from China and wholesale distribution of compact equipment under this brand on the territory of the Russian Federation and neighboring states. Chainsaws, lawn mowers, walk-behind tractors, cultivators, engines, generators, lawn mowers, motor pumps, high-pressure washers, snowblowers, motor-drills, as well as accessories and spare parts for them. this is the basis of the assortment. The office of the firm, which carries out wholesale sales in Russia and the CIS, is located in the city of Perm. They are also engaged in the SKD assembly of motoblocks that come from China in disassembled form, in the form of packaged moto kits.

Modifications in the Brait-135 line

The catalog of the official website of the Brait company currently offers 11 modifications of the Brait-135 walk-behind tractors, two of them are diesel. First about them.

  • Brait-135DEA (diesel). this option is equipped with a 4-stroke, single-cylinder BR-178FE diesel engine. vertical air cooled, direct injection, electrically started (battery included). The power of this motor is 7 horsepower, its working volume is 296 cm3. Cylinder diameter x stroke. 78 x 62. Output shaft: 25 (for splines). Milling cutter shaft: hexagon D = 32. Engine oil capacity. 1.1 l. Reducer oil volume: 2.3L. Fuel tank capacity. 3.5 liters. Walk-behind tractor weight: 138 kilograms.
  • Brait-135DEB (diesel). equipped with a 4-stroke, single-cylinder BR-186FAE diesel engine, with vertical air cooling, with direct injection, with electric start (battery included). The power of this motor is 10 horsepower, its working volume is 418 cm3. Bore x stroke. 86 x 72. Output shaft: 25 (for splines). Milling cutter shaft: hexagon D = 32. The capacity of the fuel tank is 5.5 liters. The volume of engine oil is 1.65 liters. Reducer oil volume: 2 l. Walk-behind tractor weight: 148 kilograms.
  • Brait-135GA. 4-stroke, single-cylinder BR-170F engine. The working volume of this motor is 212 cm3, its power is 7 horsepower. Manual starter. Output shaft: 20 (keyed). Milling cutter shaft: S32 hex. Oil capacity 1.1 l. The volume of the gearbox oil is 2.0 l. The volume of the fuel tank is 3.6 liters. Walk-behind tractor weight: 136 kilograms.

“Behind the wheel” of a light gasoline walk-behind tractor Brait-135GA.

  • Brait-135GB. equipped with a 4-stroke, single-cylinder BR-177F engine with a displacement of 270 cm3, 9 horsepower, with a manual starter. The weight of the walk-behind tractor in this modification is 143 kilograms. The volume of the fuel tank is 6 liters. Oil capacity: 1.1 l. The volume of the gearbox oil is 2.3 liters. Milling cutter shaft. hexagon D = 32.
  • Brait-135GBD is a single-axle tractor with the technical characteristics of the Brait-135GB model, but also equipped with a differential. The weight of this walk-behind tractor is 150 kilograms.
  • Brait-135GBE. Powered by 4-stroke, single-cylinder BR-177FD engine. Its working volume is 270 cm3, power. 9 horsepower. Starter with electric start (battery included). Output shaft: 25 (keyed). Milling cutter shaft: S32 hex. The volume of the fuel tank is 6 liters. Engine oil volume: 1.1 l. Gearbox oil volume: exactly 2 liters. The weight of such a walk-behind tractor is 156 kg.
  • Brait-135GC. with a 4-stroke, single-cylinder engine with a capacity of 13 horsepower and a displacement of 389 cm3. The starter in this modification is manual. The volume of the fuel tank is 6.5 liters. The weight of the walk-behind tractor is 150 kilograms. Milling cutter shaft: S32 hex.
  • Brait-135GCE. also with a 4-stroke, single-cylinder 13 horsepower engine and a displacement of 389 cc. But in electric start (battery included). The volume of the fuel tank is 6.5 liters. The weight of the equipment in this modification is 163 kilograms.
  • Brait-135GD. equipped with a 15-horsepower 4-stroke, single-cylinder engine with a displacement of 420 cm3. The starter is manual. The volume of the fuel tank is 6.5 liters. The mass of the walk-behind tractor is 148 kilograms.
  • Brait-135GDE. also with a 4-stroke, single-cylinder petrol engine with a displacement of 420 cm3 and a capacity of 15 horsepower. But equipped with an electric start (battery included). The weight of the walk-behind tractor in this modification is 163 kilograms.
  • Brait-135GDD is a single-axle tractor similar in technical characteristics to the Brait-135GD modification, but equipped with a differential. The mass of the walk-behind tractor in this version is 153 kilograms.

Engine and transmission

Motoblocks “Brait-135” are equipped with the already mentioned four-stroke air-cooled engines, which were made by Chinese developers in the image and likeness of the popular Japanese small-sized single-cylinder engine Honda GX 390. The working volume is from 0.212 to 0.42 liters, the power is from 7 to 15- ti horsepower.

At a more affordable cost, the Chinese engine is endowed with a number of advantages of the Japanese original engine. It is economical, has high torque and good elasticity. The engine has liner cylinders, significantly extended service life, improved heat dissipation, decent power and performance capabilities. The fuel consumption of the “Brait-135” engine is 1-2 liters of gasoline per hour, depending on the load in operation.

Two modifications are equipped with single-cylinder diesel engines of a simple and reliable design, also copied from the Japanese.

The clutch mechanism is of the gear type. Reducer. gear, designed for significant loads. The number of gears is 2 forward and 1 reverse. Supported engine oil type. 5W-30, 10W-30, SAE-30.

Consumers do not have any significant complaints about the operation of Brait-135 walk-behind tractors. The owners refer to the positive aspects of this technique as its affordable cost (motor-blocks of domestic production differ significantly in price, upwards); endurance and unpretentiousness; lack of strong vibration during operation; excellent off-road performance on such large tires with “herringbone” tread.

They praise the comfortable, ergonomic design of the handle, with a comfortable grip and rubberized pads. The Brait-135 walk-behind tractors have a multifunctional rotary control handle for the operator. The ability to change positions both horizontally and vertically greatly simplifies work in hard-to-reach places.

A drawback that often manifests itself during long-term operation is engine overheating. Because of this, you have to stop it for a while to cool down. Also, at increased workloads, large vibration begins and extraneous noise occurs.

As a rule, the owners do not have any complaints about the build quality of motoblocks. Although it is recommended to always check that the single axle tractor is fully and correctly assembled before starting to use it. Make sure that all elements of the tool are installed correctly and securely, if necessary, tighten the bolts and nuts. There is an instruction in Russian, it is not difficult even for a beginner to understand the device and the features of operation.

Diesel walk-behind tractors Brait-135 are suitable for processing large areas. Their high tractive effort allows them to operate successfully at low revs. The motor heats up less than gasoline counterparts. This makes them perfect for hilling, plowing, cultivation and similar agricultural operations.

Description

the single-axle tractor BRAIT 135 GD NMB belongs to the heavy class, it differs from its younger brothers with a capacity of 15 hp. The set includes huge in size pneumatic wheels 5 x 12. Due to its weight of 130 kg and large wheels, a single-axle tractor will be an ideal option for transporting goods using a trolley! Unlike the standard model, the single-axle tractor BRAIT 135 GD NMB has impressive dimensions due to a reinforced frame structure, an enlarged power take-off shaft, as well as a large fuel tank capacity of 6.5 liters.

POWER TAKE-OFF SHAFT. allows you to install a limitless variety of attachments. In this model, the controls are not on the steering wheel, you need to switch speeds here with a special lever. The weight of the walk-behind tractor has increased significantly, because a gearbox with a gear drive is installed here, and the type of clutch is disc. the single-axle tractor still has a large working width (up to 120 cm), equipped with hardened milling cutters, which makes it possible to use it on heavy soils and for processing virgin lands. The presence in the set of pneumatic wheels, huge in diameter, with an aggressive tread 5×12 in size, will allow the walk-behind tractor to work on any kind of soil, and also allows it to be used in conjunction with a cart for transporting goods up to 800 kg. Time-tested quality, more than 5 years on the motoblock market and thousands of satisfied customers speak about it!

single-axle tractor BR-135GD (15hp)

power 15 hp; weight 130 kg; oil level sensor, prevents the engine from starting with a low oil level; reinforced wheel mounting structure; large wheels 5.0012, increasing the cross-country ability! telescopic footboard; powerful, heavy uniaxial tractor; PTO; distance between wheels 60 cm; new handles and throttle grip in SACON style.

the single-axle tractor BRAIT 135 GD NMB is compatible with all types of attachments of the Cascade / Neva type, as well as with all equipment where a power take-off shaft is required.

I would like to note the quality of the engine performance, due to the fact that all engines are made according to Honda specifications and have liner cylinders, the service life is significantly increased, heat transfer is improved, as well as power and performance are increased.

Powerful machine! Everything works fine, everything is in perfect order. high-quality assembly and parts, simple operation, low maintenance, it will get bogged down without problems, the handles are comfortable, impressive wheels due to them are large cross-country ability, plows everything, it’s a pleasure to work with.

uniaxial tractor is a beast. I wanted a powerful multifunctional device, thanks to your specialist, the guy understands great, he picked it up just right!

Description

The powerful single-axle tractor BRAIT 105 differs from its younger brothers in that it has a POWER TAKE-OFF SHAFT. this allows you to install an unlimited number of types of attachments. It also has controls on the steering wheel, it is much more convenient to switch speeds on this model. The weight of the walk-behind tractor has increased significantly, because a gearbox with a gear drive is installed here, and the type of clutch is disc. the single-axle tractor still has a large working width (up to 120 cm), equipped with hardened milling cutters, which makes it possible to use it on heavy soils and for processing virgin lands. The presence in the set of pneumatic wheels with an aggressive tread of 4×10 size will allow the walk-behind tractor to work on any kind of soil, and also allows it to be used in conjunction with a cart for the transport of goods up to 500 kg.

the single-axle tractor BRAIT 105 is compatible with all types of attachments of the Cascade / Neva type, as well as with all equipment where a power take-off shaft is required.

I would like to note the quality of the engine, due to the fact that all engines are made using Honda technology and have liner cylinders, the service life is significantly increased, heat transfer is improved, as well as power and performance are increased.

single-axle tractor BRAIT 105 with PTO (7 HP)

Engine: 170L (similar to Honda GX210) Power: 7.0 hp / 5.2 kW Starter: Manual

Power take-off shaft: yes Gearbox: Gear clutch Type of clutch: Disc Packing dimensions (LxWxH): 1010x570x775 mm Processing width 720-1200 / depth 300 mm (cutters included) Tank capacity: 3.6 l Weight: 110 kg Number of speeds: 2 forward, 1 back

Pneumatic wheel size 4×10 Milling cutter shaft: Hexagon S23

Power Take Off (PTO) Shaft Basics

Buy single axle tractor BRAIT 105 on motobloki66.ru

uniaxial tractor. fire, I really like it. Powerful, functional, reliable. It works great with the trailer. there were no difficulties or complaints during the work. In the garden, he also plows like a horse. everything is fine!

the uniaxial tractor is really good, it mills the cart very well, rushing like a beast, but for other works its speed for 1 gear is great. And the VOM goes straight from the internal combustion engine. For a roaring digger, I lowered the speed with pulleys, and reduced the speed I made a chain creeper. Now I plant it, huddle, dig. In the winter I push the snow with a blade. During the year of exploitation, the candlestick failed, the spark disappeared. It was cured by removing the tin sheath from it. I’m happy with the purchase, I’m not sorry. what did you buy.

single-axle tractor BRAIT 135 GE (17 HP)

Engine: 192L Power: 17.0 hp Starter: Manual Gearbox: Gear type Clutch type: Disc Package dimensions (LxWxH): 1010x570x775 mm Width / working depth: 700-1500 / 150-300 mm (Mills included) Tank capacity: 6.0 L Weight: 160 kg Number of speeds: 2 forward, 1 back

Pneumatic wheel size 6×12 Milling cutter shaft: Hexagon S31

Description

the single-axle tractor BRAIT 135 GE 17 hp belongs to the heavy class, it differs from its younger brothers with a capacity of 17 hp. The set includes huge pneumatic wheels 6 x 12. Due to its weight of 160 kg and large wheels, a single-axle tractor will be an ideal option for transporting goods using a trolley! Unlike the standard model, the BRAIT 135G single-axle tractor has impressive dimensions due to a reinforced frame structure, an enlarged power take-off shaft in diameter, as well as a large fuel tank capacity of 6 liters.

POWER TAKE-OFF SHAFT. allows you to install a limitless variety of attachments. In this model, the controls are not on the steering wheel, you need to switch speeds here with a special lever. The weight of the walk-behind tractor has increased significantly, because a gearbox with a gear drive is installed here, and the type of clutch is disc. the uniaxial tractor still has a large working width (up to 150 cm), equipped with hardened milling cutters, which makes it possible to use it on heavy soils and for processing virgin lands. The presence in the set of pneumatic wheels of huge diameter with an aggressive tread of 6×12 size will allow the walk-behind tractor to work on any kind of soil, and also allows it to be used in conjunction with a cart for transporting goods up to 700 kg. Time-tested quality, more than 5 years on the motoblock market and thousands of satisfied customers speak about it!

the single-axle tractor BRAIT 135 GE is compatible with all types of attachments of the Cascade / Neva type, as well as with all equipment where a power take-off shaft is required.

I would like to note the quality of the engine performance, due to the fact that all engines are made according to Honda specifications and have liner cylinders, the service life is significantly increased, heat transfer is improved, as well as power and performance are increased.

single-axle tractor BRAIT BR-135 GDS 15 l / with petrol PTO

the single-axle tractor BRAIT BR-135GDS with PTO, with a reduction gear (15 hp, 5×12 wheels) belongs to the heavy class, it differs from its younger brothers with a power of 15 hp. The set includes huge in size pneumatic wheels 5 x 12. Due to its weight of 150 kg and large wheels, a single-axle tractor will be an ideal option for transporting goods using a trolley! Unlike the standard model, the BRAIT 135 single-axle tractor has impressive dimensions due to a reinforced frame structure, an increased power take-off shaft in diameter, as well as a large fuel tank capacity of 6.5 liters.

POWER TAKE-OFF SHAFT. allows you to install a limitless variety of attachments. In this model, the controls are not on the steering wheel, you need to switch speeds here with a special lever. The weight of the walk-behind tractor has increased significantly, because a gearbox with a gear drive is installed here, and the type of clutch is disc. the single-axle tractor still has a large working width (up to 120 cm), equipped with hardened milling cutters, which makes it possible to use it on heavy soils and for processing virgin lands. The presence in the set of pneumatic wheels, huge in diameter, with an aggressive tread 5×12 in size, will allow the walk-behind tractor to work on any kind of soil, and also allows it to be used in conjunction with a cart for transporting goods up to 800 kg. Time-tested quality, more than 5 years on the motoblock market and thousands of satisfied customers speak about it!

the single-axle tractor BRAIT BR-135GDS with PTO, with a reduction gear (15 HP, 5×12 wheels) is compatible with all types of attachments of the Cascade / Neva type, as well as with all equipment where a power take-off shaft is required. I would like to note the quality of the engine performance, due to the fact that all engines are manufactured according to Honda specifications and have liner cylinders, the service life is significantly increased, heat transfer is improved, as well as power and performance are increased.

Has additional reduced forward speeds and reduced reverse speed!

Weight, kg. 153 Power, h.p. 15 Displacement, cm3 420 Engine type petrol Engine model 190 F (analogue of Honda) Cylinder engine yes Wheel size 5×12 Gearbox type reinforced Number of gears 4 forward, 1 back Power take-off shaft yes Oil volume in the engine, l 1.1 Oil volume in the gearbox, l 2.3 Fuel tank capacity, l. 6.5 Manual starter Depth of processing, mm. 150-350 Processing width, mm. 800-1500 Steering wheel adjustment vertically, horizontally Shaft of cutters hexagon S31 Output shaft 25 (for splines) Differential no Manufacturer’s warranty 1 year Complete set of cutter wheels Clutch type disc

uniaxial tractor BRAIT BR-135GA 7 hp with power take-off

Select the text with an error and press CtrlEnter or the “Report an error” button.

Features of the walk-behind tractor

Select the text with an error and press CtrlEnter or the “Report an error” button.

Stable BriggsStratton CR950 Engine The BriggsStratton CR950 petrol engine is a single-cylinder, four-stroke engine. The cast iron liner increases the reliability and durability of the motor, preventing wear and tear and compensating for the effects of improper handling, while ensuring reduced oil consumption. The Lo-Tone muffler guarantees low noise and good sound quality. Float carburetor provides optimal fuel delivery for increased reliability and performance.

Reducer in an aluminum casing The transmission of the Neva MB2-BS (CR950) walk-behind tractor is a gear-chain reducer in an aluminum casing. The advantage of this gearbox is its high efficiency and robustness. The gearbox provides the walk-behind tractor with high torque and sufficient traction. As a result, the machine perfectly processes any type of soil, and also transports goods in difficult travel conditions.

Additional set of gears Initially, in the “Neva” MB2-BS (CR950) walk-behind tractor, a set of low gears is installed, consisting of 2 forward and 1 reverse gears. However, in the case of rearranging the belt on the double-ribbed pulleys, a set of upshifts becomes available, which also includes 2 forward and 1 reverse gears. Thus, the operator has 4 forward and 2 reverse gears. The applicability of each of these gears is determined by the type of operation performed, as well as by the operating conditions. For example, plowing can be done in any of the forward gears. However, preference will be given to the gear that is more suitable for the specific soil type.

Uncoupling the left wheel The single-axle tractor “Neva” MB2-BS (CR950) has the function of uncoupling the left wheel. This feature is especially useful when, during plowing or cultivation, you reach the end of the field and you need to rotate the single axle tractor 180 degrees to continue working. By pressing the wheel release lever, you can easily make a turn, even in a small area.

Mechanical gear shift The gear shift lever in the “Neva” MB2-BS (CR950) walk-behind tractor is located on the gearbox. The design is reliable and durable. Gears are easily and silently turned on, softly and smoothly turned off. The lever is at a comfortable distance from the steering wheel for quick gear changes.

Independent adjustment of the handlebars For the convenience of the user, the handlebars in the “Neva” MB2-BS (CR950) walk-behind tractor have independent adjustment, which is especially important when cutting furrows. a uniaxial tractor rolls on its side during this operation, since one of its wheels goes along the furrow, and the other on untreated soil. If the steering wheel is installed in the standard position, it is extremely inconvenient to work on the walk-behind tractor. Therefore, the appropriate height is selected for each handle, which is convenient for the user.

Cultivation on 4-8 cutters The single-axle tractor “Neva” MB2-BS (CR950) is capable of working with a different number of cutters. Usually, 4 or 6 cutters are installed on the machine, depending on the width of the area to be processed. In the case of processing light soil, it is possible to simultaneously install 8 milling cutters on a uniaxial tractor, which makes it possible to process the site faster. To ensure safety during cultivation, flaps must be installed on a uniaxial tractor.

WILL THE MOTOR BLOCKS PULL THE HORSE PLOW WITHOUT WEIGHTENERS??

A high-quality hitch is a guarantee of a good mood for the owner of the walk-behind tractor. The plow from the Belarus-09 MTZ walk-behind tractor, or as it is also called the HORSE PLOW, has won a good reputation. LET’S COMPARE motoblocks of different weight and power categories with it in a pair. Will they pull this plow at all? Everything in our new video

Engine and transmission

Motoblocks “Brait-135” are equipped with the already mentioned four-stroke air-cooled engines, which were made by Chinese developers in the image and likeness of the popular Japanese small-sized single-cylinder engine Honda GX 390. The working volume is from 0.212 to 0.42 liters, the power is from 7 to 15- ti horsepower.

At a more affordable cost, the Chinese engine is endowed with a number of advantages of the Japanese original engine. It is economical, has high torque and good elasticity. The engine has liner cylinders, significantly extended service life, improved heat dissipation, decent power and performance capabilities. The fuel consumption of the “Brait-135” engine is 1-2 liters of gasoline per hour, depending on the load in operation.

Two modifications are equipped with single-cylinder diesel engines of a simple and reliable design, also copied from the Japanese.

The clutch mechanism is of the gear type. Reducer. gear, designed for significant loads. The number of gears is 2 forward and 1 reverse. Supported engine oil type. 5W-30, 10W-30, SAE-30.

Consumers do not have any significant complaints about the operation of Brait-135 walk-behind tractors. The owners refer to the positive aspects of this technique as its affordable cost (motor-blocks of domestic production differ significantly in price, upwards); endurance and unpretentiousness; lack of strong vibration during operation; excellent off-road performance on such large tires with “herringbone” tread.

They praise the comfortable, ergonomic design of the handle, with a comfortable grip and rubberized pads. The Brait-135 walk-behind tractors have a multifunctional rotary control handle for the operator. The ability to change positions both horizontally and vertically greatly simplifies work in hard-to-reach places.

PTO engagement techniques on Walk behind tractors

A drawback that often manifests itself during long-term operation is engine overheating. Because of this, you have to stop it for a while to cool down. Also, at increased workloads, large vibration begins and extraneous noise occurs.

As a rule, the owners do not have any complaints about the build quality of motoblocks. Although it is recommended to always check that the single axle tractor is fully and correctly assembled before starting to use it. Make sure that all elements of the tool are installed correctly and securely, if necessary, tighten the bolts and nuts. There is an instruction in Russian, it is not difficult even for a beginner to understand the device and the features of operation.

Diesel walk-behind tractors Brait-135 are suitable for processing large areas. Their high tractive effort allows them to operate successfully at low revs. The motor heats up less than gasoline counterparts. This makes them perfect for hilling, plowing, cultivation and similar agricultural operations.

Brought an assistant to the farm.

Village life. With the money he received from the sale of calves, he bought a Brait single-axle tractor

General information and design

The Brait 135 is powered by a powerful 4-stroke engine that was developed in China and is an exact replica of the original Japanese Honda GX 390 engine. This means that the Chinese engine is endowed with the qualities of the original and at a very affordable price. The power plant is very economical, has high torque and good elasticity. Thanks to this, the walk-behind tractor has enough traction capabilities to work on any road surface, and at the same time handle different areas, including the hardest lands, including virgin soil. This is facilitated by the support of a large number of attachments. The robust and robust design is adapted to any option, and allows you to unleash their potential to 100%. The engineers were able to provide a special fastening technology for each equipment. Owners of the Brait 135 will appreciate this feature.

Among the agricultural work available for Brait 135 are cultivation, hilling, planting and planting of vegetable crops. In addition, when installing some types of options, other tasks are available, such as pumping water, transporting goods, mowing grass and other operations. Let’s pay attention to the carrying capacity during the transportation of goods, which is 500 kg. a very decent indicator in the class.

Also, the car is equipped with a manual gear shift. This mechanism is considered more reliable and time-tested than automatic switching. Plus, the engine can also be manually started, making it easy to start in harsh low-temperature environments.

Particularly noteworthy is the hitch, which is designed to securely fix large attachments such as plows, hillers and wagons. In addition, the hitch allows you to connect even incompatible equipment from other competing motoblocks.

The machine is equipped with impressive pneumatic wheels that provide acceptable geometric flotation results. The wheels have a special tread pattern, which, as conceived by the developers, has the effect of self-cleaning from dirt. Traction and stability on any surface are also provided by ground lugs, which are one of the most important options that allow you to unleash 100% of the performance of the Brait 135.

single-axle tractor brait 135 gd pro my opinion after a month of operation.

The 135th is the flagship among Brait motoblocks, and people recommend

The model range of Chinese motor-blocks of the Brait trademark is represented on the Russian market by a fairly wide range of compact agricultural machines. They differ in engine power and, accordingly, in their capabilities. One of the powerful and productive models in this line, designed for work in areas of medium and large areas. the single-axle tractor “Brait-135”. There are several options for the execution of such motoblocks.

The Brait trademark was registered in Russia in 2012, and since that time the company has been supplying from China and wholesale distribution of compact equipment under this brand on the territory of the Russian Federation and neighboring states. Chainsaws, lawn mowers, walk-behind tractors, cultivators, engines, generators, lawn mowers, motor pumps, high-pressure washers, snowblowers, motor-drills, as well as accessories and spare parts for them. this is the basis of the assortment. The office of the firm, which carries out wholesale sales in Russia and the CIS, is located in the city of Perm. They are also engaged in the SKD assembly of motoblocks that come from China in disassembled form, in the form of packaged moto kits.

single-axle tractor BRAIT 135 GD

Published Interest Yes 9 months ago Search Interest Yes

Engine and transmission

Motoblocks “Brait-135” are equipped with the already mentioned four-stroke air-cooled engines, which were made by Chinese developers in the image and likeness of the popular Japanese small-sized single-cylinder engine Honda GX 390. The working volume is from 0.212 to 0.42 liters, the power is from 7 to 15- ti horsepower.

At a more affordable cost, the Chinese engine is endowed with a number of advantages of the Japanese original engine. It is economical, has high torque and good elasticity. The engine has liner cylinders, significantly extended service life, improved heat dissipation, decent power and performance capabilities. The fuel consumption of the “Brait-135” engine is 1-2 liters of gasoline per hour, depending on the load in operation.

Two modifications are equipped with single-cylinder diesel engines of a simple and reliable design, also copied from the Japanese.

The clutch mechanism is of the gear type. Reducer. gear, designed for significant loads. The number of gears is 2 forward and 1 reverse. Supported engine oil type. 5W-30, 10W-30, SAE-30.

Consumers do not have any significant complaints about the operation of Brait-135 walk-behind tractors. The owners refer to the positive aspects of this technique as its affordable cost (motor-blocks of domestic production differ significantly in price, upwards); endurance and unpretentiousness; lack of strong vibration during operation; excellent off-road performance on such large tires with “herringbone” tread.

They praise the comfortable, ergonomic design of the handle, with a comfortable grip and rubberized pads. The Brait-135 walk-behind tractors have a multifunctional rotary control handle for the operator. The ability to change positions both horizontally and vertically greatly simplifies work in hard-to-reach places.

A drawback that often manifests itself during long-term operation is engine overheating. Because of this, you have to stop it for a while to cool down. Also, at increased workloads, large vibration begins and extraneous noise occurs.

As a rule, the owners do not have any complaints about the build quality of motoblocks. Although it is recommended to always check that the single axle tractor is fully and correctly assembled before starting to use it. Make sure that all elements of the tool are installed correctly and securely, if necessary, tighten the bolts and nuts. There is an instruction in Russian, it is not difficult even for a beginner to understand the device and the features of operation.

Diesel walk-behind tractors Brait-135 are suitable for processing large areas. Their high tractive effort allows them to operate successfully at low revs. The motor heats up less than gasoline counterparts. This makes them perfect for hilling, plowing, cultivation and similar agricultural operations.

Features of the device of the Brait-135 walk-behind tractors

Brait-135 differs from its “younger brothers” in the firm in that it is heavier; equipped with efficient engines with a capacity of 9 horsepower, as well as a fuel tank with an increased (in some modifications. up to 6.5 liters) capacity.

The wheels are installed with a large diameter, with a powerful tread of 5×12 tires. When used with a cart, the Brait-135 single-axle tractor can carry loads weighing up to six hundred kilograms. The power take-off shaft allows you to use the motor-block engine as a drive for a great variety of attachments. Hexagon. S31.

the uniaxial tractor Brait-135 is equipped with a universal hitch and is easily compatible with all types of attachments, including other brands of motoblocks (in particular, Cascade, Neva, etc.) With its increased capabilities, Brait-135, at the same time, remains a very compact and maneuverable model. Additional rubberized spacers are provided on the steering rod for improved control of the device.

Traction characteristics of the walk-behind tractor increase significantly with the use of special lugs. Overall dimensions of the Brait-135 walk-behind tractor: 1010 × 570 × 775 mm.

Modifications in the Brait-135 line

The catalog of the official website of the Brait company currently offers 11 modifications of the Brait-135 walk-behind tractors, two of them are diesel. First about them.

  • Brait-135DEA (diesel). this option is equipped with a 4-stroke, single-cylinder BR-178FE diesel engine. vertical air cooled, direct injection, electrically started (battery included). The power of this motor is 7 horsepower, its working volume is 296 cm3. Cylinder diameter x stroke. 78 x 62. Output shaft: 25 (for splines). Milling cutter shaft: hexagon D = 32. Engine oil capacity. 1.1 l. Reducer oil volume: 2.3L. Fuel tank capacity. 3.5 liters. Walk-behind tractor weight: 138 kilograms.
  • Brait-135DEB (diesel). equipped with a 4-stroke, single-cylinder BR-186FAE diesel engine, with vertical air cooling, with direct injection, with electric start (battery included). The power of this motor is 10 horsepower, its working volume is 418 cm3. Bore x stroke. 86 x 72. Output shaft: 25 (for splines). Milling cutter shaft: hexagon D = 32. The capacity of the fuel tank is 5.5 liters. The volume of engine oil is 1.65 liters. Reducer oil volume: 2 l. Walk-behind tractor weight: 148 kilograms.
  • Brait-135GA. 4-stroke, single-cylinder BR-170F engine. The working volume of this motor is 212 cm3, its power is 7 horsepower. Manual starter. Output shaft: 20 (keyed). Milling cutter shaft: S32 hex. Oil capacity 1.1 l. The volume of the gearbox oil is 2.0 l. The volume of the fuel tank is 3.6 liters. Walk-behind tractor weight: 136 kilograms.

“Behind the wheel” of a light gasoline walk-behind tractor Brait-135GA.

  • Brait-135GB. equipped with a 4-stroke, single-cylinder BR-177F engine with a displacement of 270 cm3, 9 horsepower, with a manual starter. The weight of the walk-behind tractor in this modification is 143 kilograms. The volume of the fuel tank is 6 liters. Oil capacity: 1.1 l. The volume of the gearbox oil is 2.3 liters. Milling cutter shaft. hexagon D = 32.
  • Brait-135GBD is a single-axle tractor with the technical characteristics of the Brait-135GB model, but also equipped with a differential. The weight of this walk-behind tractor is 150 kilograms.
  • Brait-135GBE. Powered by 4-stroke, single-cylinder BR-177FD engine. Its working volume is 270 cm3, power. 9 horsepower. Starter with electric start (battery included). Output shaft: 25 (keyed). Milling cutter shaft: S32 hex. The volume of the fuel tank is 6 liters. Engine oil volume: 1.1 l. Gearbox oil volume: exactly 2 liters. The weight of such a walk-behind tractor is 156 kg.
  • Brait-135GC. with a 4-stroke, single-cylinder engine with a capacity of 13 horsepower and a displacement of 389 cm3. The starter in this modification is manual. The volume of the fuel tank is 6.5 liters. The weight of the walk-behind tractor is 150 kilograms. Milling cutter shaft: S32 hex.
  • Brait-135GCE. also with a 4-stroke, single-cylinder 13 horsepower engine and a displacement of 389 cc. But in electric start (battery included). The volume of the fuel tank is 6.5 liters. The weight of the equipment in this modification is 163 kilograms.
  • Brait-135GD. equipped with a 15-horsepower 4-stroke, single-cylinder engine with a displacement of 420 cm3. The starter is manual. The volume of the fuel tank is 6.5 liters. The mass of the walk-behind tractor is 148 kilograms.
  • Brait-135GDE. also with a 4-stroke, single-cylinder petrol engine with a displacement of 420 cm3 and a capacity of 15 horsepower. But equipped with an electric start (battery included). The weight of the walk-behind tractor in this modification is 163 kilograms.
  • Brait-135GDD is a single-axle tractor similar in technical characteristics to the Brait-135GD modification, but equipped with a differential. The mass of the walk-behind tractor in this version is 153 kilograms.

The 135th is the flagship among Brait motoblocks, and people recommend

The model range of Chinese motor-blocks of the Brait trademark is represented on the Russian market by a fairly wide range of compact agricultural machines. They differ in engine power and, accordingly, in their capabilities. One of the powerful and productive models in this line, designed for work in areas of medium and large areas. the single-axle tractor “Brait-135”. There are several options for the execution of such motoblocks.

The Brait trademark was registered in Russia in 2012, and since that time the company has been supplying from China and wholesale distribution of compact equipment under this brand on the territory of the Russian Federation and neighboring states. Chainsaws, lawn mowers, walk-behind tractors, cultivators, engines, generators, lawn mowers, motor pumps, high-pressure washers, snowblowers, motor-drills, as well as accessories and spare parts for them. this is the basis of the assortment. The office of the firm, which carries out wholesale sales in Russia and the CIS, is located in the city of Perm. They are also engaged in the SKD assembly of motoblocks that come from China in disassembled form, in the form of packaged moto kits.

Features of the device of the Brait-135 walk-behind tractors

Brait-135 differs from its “younger brothers” in the firm in that it is heavier; equipped with efficient engines with a capacity of 9 horsepower, as well as a fuel tank with an increased (in some modifications. up to 6.5 liters) capacity.

the single-axle tractor Brait-135 is equipped with a gear reducer, disc-type clutch. It has a significant working width and tillage (from 0.8 m to 1.20 m) and is equipped with hardened milling knives. It can be used not only on light soils, but also on all types of soils, including heavy and virgin soils. Working depth when using a milling cutter is from 150 mm to 350 mm.

The wheels are installed with a large diameter, with a powerful tread of 5×12 tires. When used with a cart, the Brait-135 single-axle tractor can carry loads weighing up to six hundred kilograms. The power take-off shaft allows you to use the motor-block engine as a drive for a great variety of attachments. Hexagon. S31.

the uniaxial tractor Brait-135 is equipped with a universal hitch and is easily compatible with all types of attachments, including other brands of motoblocks (in particular, Cascade, Neva, etc.) With its increased capabilities, Brait-135, at the same time, remains a very compact and maneuverable model. Additional rubberized spacers are provided on the steering rod for improved control of the device.

Traction characteristics of the walk-behind tractor increase significantly with the use of special lugs. Overall dimensions of the Brait-135 walk-behind tractor: 1010 × 570 × 775 mm.

Service

Many owners of Perm Brait BR-68 motoblocks note their ease of maintenance.

  • It is necessary to fill in clean and high-quality AI-92 gasoline.
  • The engine oil should be changed after 50 operating hours. This unit must be filled with a lubricant with a classification of 10W-40.
  • For the transmission unit, the publicly available Tap-15V can be used.

Auxiliary elements

Attachments are not included in the basic delivery set. But it can be installed additionally, taking into account only your needs.

  • various plows;
  • devices for planting and collecting potatoes;
  • haymaking installations;
  • soil hooks;
  • trailers (light cargo carts);
  • hillers;
  • grass mowers;
  • pumps for water;
  • snow plows.

It is necessary to buy lugs without fail. Even the best wheels will slip without their support. The choice is extremely simple. you just need to tell the sellers which model of the walk-behind tractor you need hooks for. As for the cutters, the saber-shaped variety is most often found in the delivery set of motor vehicles. Then it will be possible to disassemble this cutter and sharpen or replace the problem part.

But saber-shaped structures are suitable only for work on soft ground. If the ground is solid, you need crow’s feet. Most often they are bought when potatoes are planted on the site.

A special type of cutters is designed for processing virgin lands. It is not difficult to find out such a tool: the main unit is supplemented with rounded knives.

Potato diggers can be used to harvest other root crops as well. A fan apparatus is usually cheap, but its effectiveness is low. Important: for processing small areas where you can harvest the crop with your own hands, such a device is optimal. Vibration mechanisms have a significant advantage. much less tubers are skipped. Such a potato digger lifts the entire layer and gently sifts it.

The role of motoblocks is also great when cleaning sites from snow and dirt. If the unit is equipped with a powerful motor, snow drifts can be removed using a shovel-blade. The snow plow is even more powerful. When driving, the auger captures the snow, directing it into the bell. If there is very little snow, you can use a sweeping brush, it also removes foliage, debris and various dirt.

Regardless of the size of the farm, a trolley (trailer) is useful, because everyone has to move various loads.

To clear the area of ​​grass, you must use a mower. The more expensive (knife) one is much better to use. It is safer, can be applied to any terrain.

Technical characteristics and advantages of Brait walk-behind tractors: what you need to know

Motoblocks are one of the most widely used types of gardening equipment. Today, many people prefer Brait BR-105 walk-behind tractors. To choose the right one among them, you need to take into account a variety of nuances, which we will consider below.

Parameters and motor range

A 7-horsepower gasoline engine is responsible for the performance of the Brait-80 walk-behind tractor. a single-cylinder, four-stroke type, with a belt drive, a gearbox and a single-plate clutch.

The gearbox is three-stage, with reverse and two forward speeds. A machine with such a motor is designed for a tillage width of 800-1200 mm, and the tillage depth can reach 150-300 mm.

General information and design

The Brait 135 is powered by a powerful 4-stroke engine that was developed in China and is an exact replica of the original Japanese Honda GX 390 engine. This means that the Chinese engine is endowed with the qualities of the original and at a very affordable price. The power plant is very economical, has high torque and good elasticity. Thanks to this, the walk-behind tractor has enough traction capabilities to work on any road surface, and at the same time handle different areas, including the hardest lands, including virgin soil. This is facilitated by the support of a large number of attachments. The robust and robust design is adapted to any option, and allows you to unleash their potential to 100%. The engineers were able to provide a special fastening technology for each equipment. Owners of the Brait 135 will appreciate this feature.

Among the agricultural work available for Brait 135 are cultivation, hilling, planting and planting of vegetable crops. In addition, when installing some types of options, other tasks are available, such as pumping water, transporting goods, mowing grass and other operations. Let’s pay attention to the carrying capacity during the transportation of goods, which is 500 kg. a very decent indicator in the class.

Also, the car is equipped with a manual gear shift. This mechanism is considered more reliable and time-tested than automatic switching. Plus, the engine can also be manually started, making it easy to start in harsh low-temperature environments.

Particularly noteworthy is the hitch, which is designed to securely fix large attachments such as plows, hillers and wagons. In addition, the hitch allows you to connect even incompatible equipment from other competing motoblocks.

The machine is equipped with impressive pneumatic wheels that provide acceptable geometric flotation results. The wheels have a special tread pattern, which, as conceived by the developers, has the effect of self-cleaning from dirt. Traction and stability on any surface are also provided by ground lugs, which are one of the most important options that allow you to unleash 100% of the performance of the Brait 135.

Engine and transmission

Motoblocks “Brait-135” are equipped with the already mentioned four-stroke air-cooled engines, which were made by Chinese developers in the image and likeness of the popular Japanese small-sized single-cylinder engine Honda GX 390. The working volume is from 0.212 to 0.42 liters, the power is from 7 to 15- ti horsepower.

At a more affordable cost, the Chinese engine is endowed with a number of advantages of the Japanese original engine. It is economical, has high torque and good elasticity. The engine has liner cylinders, significantly extended service life, improved heat dissipation, decent power and performance capabilities. The fuel consumption of the “Brait-135” engine is 1-2 liters of gasoline per hour, depending on the load in operation.

Two modifications are equipped with single-cylinder diesel engines of a simple and reliable design, also copied from the Japanese.

The clutch mechanism is of the gear type. Reducer. gear, designed for significant loads. The number of gears is 2 forward and 1 reverse. Supported engine oil type. 5W-30, 10W-30, SAE-30.