How to mark a 45 degree angle?
How to mark an angle of 45 degrees, ask you and you will answer. with a protractor, or some other special tool. There are many of them now.
That’s right, but imagine that you don’t have any tools at hand with which you could measure an angle of 45 degrees. Everything, work has stopped?
No, of course, it’s not for nothing that they say. the need for invention is cunning!
It’s simple. You just need one sheet of paper, at least a newspaper or anything else that looks like a sheet. One thing is important. this sheet must have at least one right angle.
Suppose you have an ordinary A4 sheet at hand. It remains, bending it diagonally, to combine the two sides outgoing from the same corner (point). Thus, our right angle (90 degrees) is exactly halved and will correspond to 45 degrees.
Now attach it to the desired place and mark!
Saw Angle 45 Degree Angle
Authorization
- TIPS CATALOG
- VIDEO TIPS
- OUR AUTHORS
- SELECTED TIPS
- Jokes (54)
- Armenian radio (2)
- About women (16)
- About men (16)
- Diets (70)
- Home Pharmacy (49)
- Health (286)
- Medicine (59)
- Traditional medicine (122)
- Physical Education (47)
- Fashion (24)
- Clothing & Accessories (59)
- Haircuts and hairstyles (5)
- Kids (18)
- Women (95)
- Men (94)
- Psychology (147)
leave a comment
You must be logged in to leave a comment.
Using templates
If there is no protractor, miter box or ready-made corner pieces available, you will have to look for a suitable template. Of course, the template must have the correct angle. It is applied to the workpiece and the workpiece is marked with a pencil. This is one of the easiest ways to achieve the desired result.
Trimming parts at an angle using a protractor
You can trim the part at an angle using a protractor. This is a measuring tool that is easy to use, and which is designed specifically to measure angles or make the necessary markings on certain parts. The protractor is applied to the part, the angle is marked and the markings are made with a pencil. Using this marking, it will not be difficult to cut the workpiece at the desired angle.
Ways to cut the platband at 45 degrees without using a miter box
The easiest way is to use an ordinary protractor, which is in every house where a school-age child lives. It is not so difficult to make markup with its help.
Important:
The cut itself is also important. To avoid the formation of cracks, it is recommended to use a hacksaw not for wood, but for metal. Yes, this method takes more time, but for that the cut will be much more accurate and smoother.
When the markings are made using the protractor, you need to position the platband on a horizontal surface so that the front side is up. It is recommended to make a cut over the whole plane.
If there are no stationery nearby, you can use a regular tile with which you can draw a 90-degree angle. By dividing it into 2 halves, we get a 45-degree angle template that can be used for marking in place of a miter box.
If there is a ruler, the task is simplified several times at once. You just need to take a leaflet A-4 and draw a square, then draw the bisectors of the corners. To make it more convenient, you can take a small board and attach it to one of the corners, which will allow you to fix the structure. Well, then you need to attach the platband and start sawing.
Method of joining platbands without trimming
Platbands today are often not cut at an angle in order to then join together, but make a joint at right angles. This method of joining platbands does not require any special trimming, which is very convenient. In addition, this method looks more modern and attractive.
Angle trimming with a miter box
If, nevertheless, it is necessary to cut this or that part at an angle, then you should stock up on a miter box. the simplest device that looks like a small box. The miter box has slots that are designed for a saw or a long sharp knife. Of course, these slots are made to form an even and precise 45 degree angle.
However, a miter box can have many slots at once, at different angles. This is convenient, because with the help of one device, you can cut any parts at different angles.
There are adjustable miter boxes on sale. The slots in such a miter box can be adjusted, which allows the master to set exactly the angle that is required at the moment. In particular, it is quite easy to transfer the slots of such a miter box to a position of 45 degrees.
Now the workpiece can be cut easily. A baguette, platband or plinth is placed in the miter box, after which a saw is inserted into the slots and the excess is simply cut off. The angle ends up being perfect, exactly 45 degrees.
What if there is no miter box? Very simple. You need to make a template according to which it will not be difficult to transfer the necessary markup to the blanks. As a template, you can choose thick cardboard or something else that will be appropriate in this case.
In-place pruning
The walls, floor and ceiling will not always be perfectly flat in practice. Most often they have irregularities. For this reason, there is no need to cut the workpieces at clear and precise angles, because they will not fit perfectly anyway.
Instead, it is sometimes convenient to trim the same skirting board in place. That is, first, one plinth plinth is glued, cut it in the corner, and the second plank is cut under it.
Of course, it is hardly possible to cut off the workpiece perfectly. However, if a small gap appears in the corner, it can always be covered with putty or gypsum plaster. Nothing special.
How to cut the corner of a skirting board or baguette without a miter box
Platband is an overhead frame inherent in the opening of a door or window. This is a decorative piece made in the form of curly strips. There are also carved platbands, their difference is that they are made of wood and are often decorated with abundant carvings. The role of the frame is not only decorative, it allows you to slightly eliminate such unwanted blowing in the area of the gap between the wall and the window or door frame, by overlapping.
How to cut a 45 degree angle
Sometimes you need to trim a particular part or product at a certain angle. As a rule, you need to trim baguettes, fillets, platbands, baseboards and other similar interior elements at an angle of 45 degrees. Anyone can cope with this task. The main thing is not to rush, not to be nervous and everything will work out.
Buy ready-made corner pieces
For example, with regard to baguettes or fillets, special corner elements are sold for them, which fit perfectly into the corner and do not need to be trimmed. You just need to glue them in place and press them well.
How to make a miter box at home?
If the above methods are not to your liking, you can make a miter box at home on your own. A miter box is a device that resembles a tray in its shape, which has a U-shape.
It is equipped with saw slots for cutting material at a certain angle. The dimensions of the parts are not very important, but the wider our homemade device is, the wider and more accurate we can cut wide slats.
Important:
Everything needs to be done wisely, you should not overdo it either, because if the width of the miter box exceeds half the width of the hacksaw, it will be inconvenient to saw.
You can do the markup using the methods described above, then use small pieces of plywood and a hacksaw. And in order to hold everything together, you can use self-tapping screws or even super glue. However, all this is more complicated and will take much more time, although it will provide the most accurate result (of course, if you do everything right).
However, if for some reason a situation arises that it is impossible to get the tool in the shortest possible time, you can use the tools at hand, such as a ruler, protractor or even tiles, with which it is easy to create a template with the necessary markings or even completely recreate a miter box at home.
You will need a piece of paper. On it you need to draw a large square, where the diagonals will also be drawn. It should look like this:
Imagine that the square is your ceiling, the corners of the square are the joint of the plinth.
Next, take a block and attach it to the wall (that is, to the bottom side of the square. Attach a plinth to the block. Saw off the plinth along a diagonal mowing line. That is, it should look like this:
With the skirting board on the side wall, do the same using the side of the square. If you do everything correctly, then everything should turn out clearly and smoothly.
To cut the skirting board at an angle of 45 degrees, you need to measure its width and set this value along the length at one of the ends of the skirting board. It will turn out to be a square. Now draw a diagonal in this square in the desired direction and saw off.
The fastest option is this:
- Find the longest point of the skirting board, mark it out with a pencil or anything at right angles on the flat side of the skirting board.
- Next, with any suitable object, preferably flat (even a piece of paper is suitable) for a more accurate result, measure the width of the plinth and mark it on this object.
- The next step is to transfer this length to the plinth along its length from the marked point towards the working surface.
- Move the point at a right angle to the opposite side and mark it.
- We check the lengths of the sides. they must be equal, i.e. it should be a square.
- Now you need to draw a diagonal in a square from the far point of the baseboard to the nearest.
- We visually check if you have marked the line correctly.
- It remains only to cut the skirting board, but it’s not so simple, because they are made with different profile patterns and the cut line may go in the wrong direction and there will be a gap in the joint, or two skirting boards may not be compatible with each other, so you need to find a surface where fix the plinth parallel to the horizon, and the direction of the saw should be strictly perpendicular.
- Now you can cut the skirting board, if all the conditions are met, then the skirting board will be cut strictly at an angle of 45 degrees.
Method of joining platbands without trimming
Platbands today are often not cut at an angle in order to then join together, but make a joint at right angles. This method of joining platbands does not require any special trimming, which is very convenient. In addition, this method looks more modern and attractive.
Angle trimming with a miter box
If, nevertheless, it is necessary to cut this or that part at an angle, then you should stock up on a miter box. the simplest device that looks like a small box. The miter box has slots that are designed for a saw or a long sharp knife. Of course, these slots are made to form an even and precise 45 degree angle.
However, a miter box can have many slots at once, at different angles. This is convenient, because with the help of one device, you can cut any parts at different angles.
There are adjustable miter boxes on sale. The slots in such a miter box can be adjusted, which allows the master to set exactly the angle that is required at the moment. In particular, it is quite easy to transfer the slots of such a miter box to a position of 45 degrees.
Now the workpiece can be cut easily. A baguette, platband or plinth is placed in the miter box, after which a saw is inserted into the slots and the excess is simply cut off. The angle ends up being perfect, exactly 45 degrees.
What if there is no miter box? Very simple. You need to make a template according to which it will not be difficult to transfer the necessary markup to the blanks. As a template, you can choose thick cardboard or something else that will be appropriate in this case.
Ways to cut the platband at 45 degrees without using a miter box
The easiest way is to use an ordinary protractor, which is in every house where a school-age child lives. It is not so difficult to make markup with its help.
Important:
The cut itself is also important. To avoid the formation of cracks, it is recommended to use a hacksaw not for wood, but for metal. Yes, this method takes more time, but for that the cut will be much more accurate and smoother.
If there are no stationery nearby, you can use a regular tile with which you can draw a 90-degree angle. By dividing it into 2 halves, we get a 45-degree angle template that can be used for marking in place of a miter box.
If there is a ruler, the task is simplified several times at once. You just need to take a leaflet A-4 and draw a square, then draw the bisectors of the corners. To make it more convenient, you can take a small board and attach it to one of the corners, which will allow you to fix the structure. Well, then you need to attach the platband and start sawing.
Trimming parts at an angle using a protractor
You can trim the part at an angle using a protractor. This is a measuring tool that is easy to use, and which is designed specifically to measure angles or make the necessary markings on certain parts. The protractor is applied to the part, the angle is marked and the markings are made with a pencil. Using this marking, it will not be difficult to cut the workpiece at the desired angle.
Using templates
If there is no protractor, miter box or ready-made corner pieces available, you will have to look for a suitable template. Of course, the template must have the correct angle. It is applied to the workpiece and the workpiece is marked with a pencil. This is one of the easiest ways to achieve the desired result.
How to cut a 45 degree angle
Sometimes you need to trim a particular part or product at a certain angle. As a rule, you need to trim baguettes, fillets, platbands, baseboards and other similar interior elements at an angle of 45 degrees. Anyone can cope with this task. The main thing is not to rush, not to be nervous and everything will work out.
Buy ready-made corner pieces
For example, with regard to baguettes or fillets, special corner elements are sold for them, which fit perfectly into the corner and do not need to be trimmed. You just need to glue them in place and press them well.
In-place pruning
The walls, floor and ceiling will not always be perfectly flat in practice. Most often they have irregularities. For this reason, there is no need to cut the workpieces at clear and precise angles, because they will not fit perfectly anyway.
Instead, it is sometimes convenient to trim the same skirting board in place. That is, first, one plinth plinth is glued, cut it in the corner, and the second plank is cut under it.
Of course, it is hardly possible to cut off the workpiece perfectly. However, if a small gap appears in the corner, it can always be covered with putty or gypsum plaster. Nothing special.
How to cut the corner of a skirting board or baguette without a miter box
Platband is an overhead frame inherent in the opening of a door or window. This is a decorative piece made in the form of curly strips. There are also carved platbands, their difference is that they are made of wood and are often decorated with abundant carvings. The role of the frame is not only decorative, it allows you to slightly eliminate such unwanted blowing in the area of the gap between the wall and the window or door frame, by overlapping.
How to make a miter box at home?
If the above methods are not to your liking, you can make a miter box at home on your own. A miter box is a device that resembles a tray in its shape, which has a U-shape.
It is equipped with saw slots for cutting material at a certain angle. The dimensions of the parts are not very important, but the wider our homemade device is, the wider and more accurate we can cut wide slats.
Important:
Everything needs to be done wisely, you should not overdo it either, because if the width of the miter box exceeds half the width of the hacksaw, it will be inconvenient to saw.
You can do the markup using the methods described above, then use small pieces of plywood and a hacksaw. And in order to hold everything together, you can use self-tapping screws or even super glue. However, all this is more complicated and will take much more time, although it will provide the most accurate result (of course, if you do everything right).
However, if for some reason a situation arises that it is impossible to get the tool in the shortest possible time, you can use the tools at hand, such as a ruler, protractor or even tiles, with which it is easy to create a template with the necessary markings or even completely recreate a miter box at home.
You will need a piece of paper. On it you need to draw a large square, where the diagonals will also be drawn. It should look like this:
Imagine that the square is your ceiling, the corners of the square are the joint of the plinth.
Next, take a block and attach it to the wall (that is, to the bottom side of the square. Attach a plinth to the block. Saw off the plinth along a diagonal mowing line. That is, it should look like this:
With the skirting board on the side wall, do the same using the side of the square. If you do everything correctly, then everything should turn out clearly and smoothly.
To cut the skirting board at an angle of 45 degrees, you need to measure its width and set this value along the length at one of the ends of the skirting board. It will turn out to be a square. Now draw a diagonal in this square in the desired direction and saw off.
The fastest option is this:
- Find the longest point of the skirting board, mark it out with a pencil or anything at right angles on the flat side of the skirting board.
- Next, with any suitable object, preferably flat (even a piece of paper is suitable) for a more accurate result, measure the width of the plinth and mark it on this object.
- The next step is to transfer this length to the plinth along its length from the marked point towards the working surface.
- Move the point at a right angle to the opposite side and mark it.
- We check the lengths of the sides. they must be equal, i.e. it should turn out to be a square.
- Now you need to draw a diagonal in a square from the farthest point of the plinth to the nearest.
- We visually check if you have marked the line correctly.
- It remains only to cut the skirting board, but it’s not so simple, because they are made with different profile patterns and the cut line may go in the wrong direction and there will be a gap in the joint, or two skirting boards may not be compatible with each other, so you need to find a surface where fix the plinth parallel to the horizon, and the direction of the saw should be strictly perpendicular.
- Now you can cut the skirting board, if all the conditions are met, the skirting board will be cut strictly at an angle of 45 degrees.
In-place pruning
The walls, floor and ceiling will not always be perfectly flat in practice. Most often they have irregularities. For this reason, there is no need to cut the workpieces at clear and precise angles, because they will not fit perfectly anyway.
Instead, it is sometimes convenient to trim the same skirting board in place. That is, first, one plinth plinth is glued, cut it in the corner, and the second plank is cut under it.
Of course, it is hardly possible to cut off the workpiece perfectly. However, if a small gap appears in the corner, it can always be covered with putty or gypsum plaster. Nothing special.
How to cut the corner of a skirting board or baguette without a miter box
When installing skirting boards, it is important to arrange the corners correctly. It is they who often spoil the overall picture. How to make a corner on the plinth. external and internal, how and with what to cut. We will discuss all this further.
How to file a 45 degree angle
Platband is an overhead frame inherent in the opening of a door or window. This is a decorative piece made in the form of curly strips. There are also carved platbands, their difference is that they are made of wood and are often decorated with abundant carvings. The role of the frame is not only decorative, it allows you to slightly eliminate such unwanted blowing in the area of the gap between the wall and the window or door frame, by overlapping.
How and what to cut a plastic skirting board
All of the above applies to MDF and wood skirting boards. Cutting them with an ordinary hacksaw is not a problem. It is advisable to take a blade for metal, since it has a smaller tooth and the saw cut is smoother, you will have to work less with sandpaper. With plastic, the situation is different. when you try to cut a piece, some thin-walled skirting boards crumble and break.
Cutting plastic is not very convenient because of the thin walls
To cut normal quality plastic skirting boards you can use:
- Hacksaw for metal.
- angle grinder (angle grinder) with diamond disc.
- A revolving miter saw. Before cutting, speed up the disc and only then start cutting.
- A jigsaw and a file with a fine tooth. Here you have to try. select the speed and file.
- Sharp knife.
- Metal scissors. In any case, it is not difficult to make straight cuts with them.
Only personal experience will help you decide what is more convenient for you to cut a plastic floor plinth. If you have a miter saw, try using it. It is not a problem to try your angle grinder with a diamond disc a couple of times. If all this does not work well, try a hacksaw, jigsaw, or knife. There are, of course, special scissors for plastic, but they are too expensive to buy for a single use.
Accessories for the design of corners and joints of PVC skirting boards
In plastic skirting boards, you can design corners and joints using special fittings. There are external and internal corners, plugs and connectors. Basically, they allow you to assemble the desired configuration. Each manufacturer makes its own accessories. for its own profile, colors. But the principle of their use is the same.
How to shape the corners of a plastic skirting board
The first rule is that all cuts are made straight. Strictly perpendicular. Marks in the corners are set at a distance of 1-1.5 mm from the corner. The fact is that the rigidity fittings have their own jumpers. For them, it is necessary to retreat a couple of millimeters, but no more. Otherwise, a gap will appear or the skirting boards will pop out of these corners.
This is the result of the assembly
I must say that not everyone likes the look of plastic corners. You can make a corner on a PVC skirting board in the same way as described for wood or MDF. The only difficulty is that you have to be careful with plastic. it breaks down from excessive efforts. There is one trick. before cutting the plastic skirting board, add a little polyurethane foam on the back side and wait for the polymerization to begin. It will be tougher, easier to cut, less deformation. If the foam subsequently interferes, it is not a problem to remove it, but to cut it is, indeed, easier.
Ways to cut the platband at 45 degrees without using a miter box
The easiest way is to use an ordinary protractor, which is in every house where a school-age child lives. It is not so difficult to make markup with its help.
Important:
The cut itself is also important. To avoid the formation of cracks, it is recommended to use a hacksaw not for wood, but for metal. Yes, this method takes more time, but for that the cut will be much more accurate and smoother.
When the markings are made using the protractor, you need to position the platband on a horizontal surface so that the front side is up. It is recommended to make a cut over the whole plane.
If there are no stationery nearby, you can use a regular tile with which you can draw a 90-degree angle. By dividing it into 2 halves, we get a 45-degree angle template that can be used for marking in place of a miter box.
If there is a ruler, the task is simplified several times at once. You just need to take a leaflet A-4 and draw a square, then draw the bisectors of the corners. To make it more convenient, you can take a small board and attach it to one of the corners, which will allow you to fix the structure. Well, then you need to attach the platband and start sawing.
How to make a miter box at home?
If the above methods are not to your liking, you can make a miter box at home on your own. A miter box is a device that resembles a tray in its shape, which has a U-shape.
It is equipped with saw slots for cutting material at a certain angle. The dimensions of the parts are not very important, but the wider our homemade device is, the wider and more accurate we can cut wide slats.
Important:
Everything needs to be done wisely, you should not overdo it either, because if the width of the miter box exceeds half the width of the hacksaw, it will be inconvenient to saw.
You can do the markup using the methods described above, then use small pieces of plywood and a hacksaw. And in order to hold everything together, you can use self-tapping screws or even super glue. However, all this is more complicated and will take much more time, although it will provide the most accurate result (of course, if you do everything right).
However, if for some reason a situation arises that it is impossible to get the tool in the shortest possible time, you can use the tools at hand, such as a ruler, protractor or even tiles, with which it is easy to create a template with the necessary markings or even completely recreate a miter box at home.
Sometimes you need to trim a particular part or product at a certain angle. As a rule, you need to trim baguettes, fillets, platbands, baseboards and other similar interior elements at an angle of 45 degrees. Anyone can cope with this task. The main thing is not to rush, not to be nervous and everything will work out.
Buy ready-made corner pieces
For example, with regard to baguettes or fillets, special corner elements are sold for them, which fit perfectly into the corner and do not need to be trimmed. You just need to glue them in place and press them well.
Method of joining platbands without trimming
Platbands today are often not cut at an angle in order to then join together, but make a joint at right angles. This method of joining platbands does not require any special trimming, which is very convenient. In addition, this method looks more modern and attractive.
Angle trimming with a miter box
If, nevertheless, it is necessary to cut this or that part at an angle, then you should stock up on a miter box. the simplest device that looks like a small box. The miter box has slots that are designed for a saw or a long sharp knife. Of course, these slots are made to form an even and precise 45 degree angle.
However, a miter box can have many slots at once, at different angles. This is convenient, because with the help of one device, you can cut any parts at different angles.
There are adjustable miter boxes on sale. The slots in such a miter box can be adjusted, which allows the master to set exactly the angle that is required at the moment. In particular, it is quite easy to transfer the slots of such a miter box to a position of 45 degrees.
Now the workpiece can be cut easily. A baguette, platband or plinth is placed in the miter box, after which a saw is inserted into the slots and the excess is simply cut off. The angle ends up being perfect, exactly 45 degrees.
What if there is no miter box? Very simple. You need to make a template according to which it will not be difficult to transfer the necessary markup to the blanks. As a template, you can choose thick cardboard or something else that will be appropriate in this case.
Making an external joint
In apartments or houses, there are not only internal corners, but also external ones. In this case, the nearest inner corner is first trimmed and modified. When it’s ready, you can make an outside corner on the baseboard. We put the bar in the corner, as it should be. In the place of the outer corner with a pencil, we make a mark exactly at the place of rotation.
How to make the outer corner of the skirting board
Then we transfer the bar to the miter box, choose the appropriate position. In order not to be mistaken, all the time imagine how the plinth is against the wall and what you should get.
We cut the second segment at 45 degrees so that it joins the finished one. To do this, we change the position of the saw to the opposite and start the plinth on the other side.
How to use the miter box
A miter box will help you to cut the skirting board at an angle of 45 degrees. By the way, do you know how to use the miter box? The specialists of our portal have prepared for you a step-by-step.
Self-made miter box
- 1. First, you need to assemble the box of the future tool. To do this, it is necessary to drill holes in its side walls, for future fastening with screws and, having smeared the ends of the parts with glue, connect them in such a way that both walls are strictly perpendicular to the bottom and parallel to each other, after which we fix them with screws.
- 2. Using a protractor, mark an angle of 45 degrees with a pencil, if necessary, add additional mowing lines for the grooves. The most critical part is the cuts, it is best to make them with the same hacksaw blade as you will be cutting products. It is necessary to cut by holding the blade, avoiding strong pressure on the tool, first we cut one side, then the other.
- 3. We start processing the material. With a clamp or screws, we fix the miter box on the working surface. At the place of the future cut on the plinth or board, we make a mark. How to cut at an angle of 45 degrees becomes clear if you press it tightly against the side wall and align the mark with the slot on the template. We insert the hacksaw into the groove and cut the workpiece, while the work of the blade is limited to cuts, which allows you to make the cut as smoothly and accurately as possible.
- 4. Before sawing the skirting board, make sure that the corner of the room is really straight and, if it is not, you need to adjust the cutting angle of the workpiece. To do this, measure the inner corner of the junction of the walls, and divide the result by two. If you do not have a professional rotary miter box that can change the cutting angle by the required amount, then to achieve the result, you need to saw additional grooves at the desired angle in a homemade miter box. This way you can cut the skirting board for the most accurate alignment.
Now you know how you can cut a workpiece at a 45 degree angle. Perhaps the time has come to move from theory to practical action. The team of the mebeldok.com portal is sure that everything will definitely work out for you. stay with us!
How to cut at a 45 degree angle
Often, during repairs, you can face a situation when it is necessary to saw off a piece from a part, at an angle of strictly 45 degrees. Usually, this is needed to connect two parts at right angles, 90 degrees, such as: door trim, plinth, pieces of furniture and much more. An experienced craftsman, professionally engaged in repair work, can often do without special devices, and practically by eye is able to cut the necessary part smoothly and clearly. But if you are a novice repairman, and you have a desire to do the work as efficiently as possible, without damaging expensive parts, then you just need to purchase a miter box. a special device that allows you to saw off material at a given angle without any special tricks.
To work, you need to have: a miter box, a hacksaw, a protractor with a pencil, a workpiece made of wood, a screwdriver with screws or a clamp.
Using a ready-made miter box
How to cut the corners of a ceiling plinth
This is an instruction manual on how to cut the corners of a ceiling plinth. Considered options for solutions, such as.
Cutting the corner with a miter box
We take a polyurethane ceiling plinth. designed for the left or right side of the corner. We lean it against the future installation site so that the end of the segment opposite from the corner is in the edge of the already glued molding. In the place where the lower edge of the ceiling plinth touches the top of the wall corner, put a point with a pencil or stick a piece of electrical tape. We repeat these actions with the second segment.
How to cut the corner of the skirting board, external:
- We place the left blank in the miter box from left to right, pressing it to the edge closest to us. The corner vertex mark must match the leftmost slot in the same edge.
- We place the right blank from right to left, pressing it to the near edge. Corner Vertex Mark. To Far Right Slot.
How to cut a ceiling plinth to an inner corner? Everything is very simple, the actions will be exactly the same, only the location of the corner vertex mark changes. Here, on the contrary: for the left segment. the rightmost slot, and for the right. the leftmost slot. Finished ceiling fillets must be combined, and then look at the joints to the light. there should be no cracks. If they are very small, then editing is not needed, you can do with filling with putty after installation.
How to make a corner of a ceiling plinth: positioning the workpiece in the miter box
Important: sometimes the angles deviate too much from the standard 45 degrees, and a simple miter box for the ceiling plinth becomes useless. you can cut the excess. The way out will be the acquisition of a rotary tool, but it is not cheap and this “one-time” purchase will be irrational
Simple 45 Degree Crosscut Sled
In this case, you can get by with the method of intersecting points.
In what cases it is impossible to use tiles with edges sharpened at 45 degrees
When cutting tiles at 45 degrees, it is important to remember that sharpened ends, due to their thinning, become rather fragile. For this reason, this technology should not be used when finishing steps. In places with high traffic, the processed ends will surely begin to collapse.
Steps should be finished by overlapping the ends of the tiles or using metal corners.
In any case, before finishing the outer corners of the walls using this technology, it is worthwhile to think carefully about everything. In the event that the outer corner of the wall is often touched, then the use of this technology is not allowed as the corner can collapse due to constant external physical impact. In this case, it is recommended to give preference to the use of metal or plastic decorative corners.
Some helpful tips
Before proceeding with the installation of ceiling moldings, it is advisable to familiarize yourself with a little secrets:
- To measure the plinth strip in the space between two corners, one should not forget about a simple rule: when measuring the size of the internal corners, the corner itself is the starting point. For the outer corners, you need to do this, starting from a point spaced from it in the depth of the room by the width of the baguette;
The plinth plank is attached to the ceiling surface only after the adjacent corner of the next plank has been adjusted. To try on cuts, do not use a stepladder. it is much more comfortable to do this right on the floor; Adjusting the cuts in this matter is an inevitable event. Sometimes this needs to be done more than once or twice, which is impossible without proper patience; If there are small gaps in the corners, they can be easily puttied, with the exception of wooden skirting boards.
Instructions
- If you have nothing at hand except a sheet of paper and a pencil, then you can even do with these accessories. To do this, very carefully fold a sheet of paper in four, while smoothing the folds well. As a result, at the place of the double fold, you will get a right angle that has 90 °. Fold the corner in half again to get the 45 ° angle you want. True, in this case, a small error will appear in the form of a loss of several degrees. For a more accurate drawing, circle a right angle with a pencil on a blank sheet of paper, carefully cut it out and fold it in half. this will give an angle of 45 °.
You can draw an angle using right-angled triangles, which can be different. with angles 90 °, 45 °, 45 ° and 90 °, 60 °, 30 °. Take a triangle (90 °, 45 °, 45 °) and circle a 45 ° sharp corner on a piece of paper. If there is only a triangle with angles 90 °, 60 °, 30 °, then on another sheet of paper, circle a right angle, cut it out, fold it in half and circle it on the desired drawing. This will be the 45 ° angle. The most accurate construction option will be using a protractor. Draw a fishing line on a piece of paper, mark a corner point on it, attach a protractor and mark with a 45 ° point. then connect them together. Interestingly, even with a compass, you can also draw an angle of 45 °. To do this, it is enough to have in front of you the depicted angle of 90 ° (for example, using a right-angled triangle or by folding the paper four times). Then draw a circle from the corner point with a compass. Mark the points at the intersection of the circle and the sides of the right angle. Now, from each of the two points, with the same compass solution, make two more circles. At the point of their intersection, you get a point, which you connect with the corner, as a result of which you get two angles of 45 °.
How to properly trim tiles at 45 degrees?
In order for the corner of two tiles to look beautiful, when trimming the tile, you need to slightly go to the glaze (0.5-1mm). That is, only clay is cut. If you walk over the glaze (the front of the tile), it will be “torn” and chipped. It will immediately catch your eye, it is not beautiful.
We faced such a problem about trimming corrugated tiles. But more on that later.
Surely many of you have seen such “art”, but more often than not everyone thinks that it should be so. And the tile-maker with twenty years of experience assures that it cannot be otherwise.
Even if there is a need to cut the corner of the tile not from the “factory” edge and you have to cut the glaze, there is still a way to do it beautifully.
First, to do this, you first need to cut the tile exactly (to the desired size), and then, again, before reaching the glaze, cut it at 45 °. This cut will be much cleaner and more beautiful.
You can also process the edge of the glaze with fine sandpaper, this will make it even smoother.
Secondly, you can still cut off the corner from the beautiful edge (factory end), and sand the trimmed opposite edge with sandpaper and hide it in the other direction. It will be less conspicuous.
So, for example, we once did when facing a toilet installation. Because the beautiful corner is more important than the bottom seam. over, it turned out to be very neat too, and if you do not know that it is cropped, you will never pay attention to it.
How to cut the corners of a ceiling plinth general rules
Trimming should be carried out along the outer edge of the skirting board, as well as from the inside (when forming an outside corner) or front (for internal joining). If everything is done correctly, the texture of the cornice will not be disturbed. At home, styrofoam finishing materials are most often used. The technology of joining elements is as follows.
- The angle between the walls is measured with a protractor. In the event that it is strictly equal to 90 °, the edges must be cut at 45 °. The action is performed on both elements.
- If the joints between the ceiling and walls are not even, the corner radius should be halved. In this case, the baguette, which will be attached on the left side, is cut off on the right, and the right element, respectively, on the left.
- The edges of the inner corner pieces are trimmed so that the top is shorter than the bottom. The edges of the outer corner are formed differently: the lower part is shorter than the upper.
- Unlike foam skirting boards, wooden parts need to be precisely adjusted to each other and to adjacent surfaces, applying and cutting abutments along the mowing line.
Ceiling plinth (corners): the photo shows techniques for trimming and joining elements:
Cutting with a miter box
What is a miter box? This is a special tray made of wood, aluminum or plastic with provided grooves to guide the saw at the desired angle.
Here is a quick guide to using such a carpentry tool:
- Training. We take the product and put it in the tray. Align in the position in which it will be installed on the ceiling.
- Cutting. With the other hand, insert the cutting tool into the groove. It can be a knife or a hacksaw. And we cut it boldly. The device will not let you miss the intended place.
You should know: a blade for metal is also suitable for cutting foam.
Treatment. Wood skirting boards may need to be filed to level the cut edges. Plastic or foam can be tweaked with a knife, the main thing is that it is sharp enough.
Tip: Do not press on the product when cutting. Styrofoam can crumble, and the tree can split altogether.
It’s so easy and simple to use the miter box
Angle 45 degrees
Angle 45 degrees in geometry is common.
Consider how easy it is to build a 45-degree angle without a protractor, using only a ruler, pencil and notebook cells.
The easiest way to build a right angle.
To do this, from one point in the cells
building horizontal and vertical
The degree measure of the right angle is 90 degrees. 45 degrees is half of 90 degrees. So, to build an angle of 45 degrees, you need to take half of the right angle.
This is very easy to do. Select the vertex of the corner at the intersection of the cells. Draw one side of the corner, for example, a horizontal beam, with a ruler along the cells. To construct the second side of the 45º angle, we divide each cell diagonally (mark several points):
Then, using a ruler and a pencil, draw a second ray through these points. We got an angle of 45 degrees:
How to mark a 45 degree angle?
How to mark an angle of 45 degrees, ask you and you will answer. with a protractor, or some other special tool. There are many of them now.
That’s right, but imagine that you don’t have any tools at hand with which you could measure an angle of 45 degrees. Everything, work has stopped?
No, of course, it’s not for nothing that they say. the need for invention is cunning!
It’s simple. You just need one sheet of paper, at least a newspaper or anything else that looks like a sheet. One thing is important. this sheet must have at least one right angle.
Suppose you have an ordinary A4 sheet at hand. It remains, bending it diagonally, to combine the two sides outgoing from the same corner (point). Thus, our right angle (90 degrees) is exactly halved and will correspond to 45 degrees.
Now attach it to the desired place and mark!
Knowledge is power. Cognitive information
45 degree angle drawing
How to get a 45 degree angle without tools
If you need to get an angle of 45 degrees, what should you do in this case? For this there is a protractor known to everyone, even from school, so you can measure any angle with it.
There are many different techniques or methods for this, here is the simplest and most effective:
An angle of 45 degrees can be obtained using a regular sheet of paper, you can use a regular notebook or landscape sheet.
As a last resort, you can get by with a newspaper.
Look closely at the drawing.
In order to get the desired angle, first we make a template out of paper, and with its help we easily measure the required value.
It remains only to attach a paper blank to the part being marked and draw the line with a pencil.
As you can see, such a simple technique can easily help out in the work if the necessary tools are not available.