Super jack for a walk -behind tractor with your own hands. Optional equipment

DIY motor

In this topic I propose to post videos, photos, descriptions of devices helping to raise one.axle tractor for any operations. How much such descriptions are scattered on topics and it is difficult to find them, we will collect everything here. My jack for lifting a motor block beam (MB1). One of the conditions of creation was compactness in storing and transporting a jack. As well as the possibility of using a jack without support to the feet. My thoughts are digging only in my head. Eh will take a swarm to the cottage, yes for the weekend.

I made such a stand, although the Volgovsky jack lies. But for me it seems to me to raise for too long, to get it. And then he lifted the horns, pushed the stand with his foot, changed the wheels, and in the reverse order

The same thoughts. There are no photos nearby, then I will repeat, but I have long followed a similar path. On the hitch, the nest for attaching the guns is the same, and the racks of the guns are the same, and this should be used. I posted somewhere, I will not find it quickly, in a nutshell like this. On the front beak MB-1 puts on an adaptation with a nest for the gun. Then I look around and any of the free guns I attach there. Here is a stand.

I have a front of me as a support.

By the way, in addition to the stand, I adapted a magnetic bowl on the wing. It is very convenient to fold your fingers, stoppers and other small things there.

Yard. Well, if anyone needs a wheel, then okay. I just do not need. Yes, to be honest, then the stand is useless or what, so, the sample was. In general, I slowly come to work on the same pair of wheels, for all operations, only occasionally I remember when they ask to put cutters. And this is very rare.

I use such a poker. The idea from the forum.

You live well with you to move out from the plowed milling. I have a jack for the Neva. Nothing is welded to him. Just he is inserted into the pipe on the beak in the front or in the back is inserted. But I take off the wheels even more or less solid, and put on the milling (we don’t have any left.handed people), so I tilt the Neva to the side, I hold my left foot so that I do not fall and take off the cutters and dress the wheels in this position. Photo to show the wheel. Cutters long capture of the Neva 1.2 meters. Even with a plank under the jack is inconvenient to work with it. Just do not perceive this as criticism of your devices. It’s just like a small story about changing mills to wheels in conditions when there is no hard soil nearby. I will be alive, I will make a photo of a standing non.cancer. And there will be an operator and with him too.

The yard wrote: by the way, in addition to the stand, adapted a magnetic bowl on the wing. It is very convenient to fold your fingers, stoppers and other small things there.

Cool. I just stuck a magnet. It is necessary to stick a bowl on top.

My thoughts are digging only in my head. Eh will take a swarm to the cottage, yes for the weekend.

The same.based tractor shoots into the silencer

One of the frequent sinking breakdowns. Most often associated with the problem with candles or poor.quality fuel. When the unoic tractor starts to shoot, sneeze and make other strange sounds during operation. first of all you need to check the candles and replace the fuel, re.regulate the carburetor. If the problem is not eliminated, remove the air filter, when the engine is running, close the air with your palm and wait until the engine stalls. Repeat the procedure several times. If the above manipulations did not help, it will best contact the service center.

Next, you will find out which one.based tractor is better to choose.To make it clearer what the principle of home.made manufacturing of the walk.behind tract and its additional components consists in, it is necessary to examine in detail the device of the walk.behind tractor as a means of small mechanization. So, this unit includes several main working nodes:

Engine

As the main driving force, the standard internal combustion engine is used in the design of motoblocks. Depending on the type and brand of the walk.behind tractor, such as Caiman Vario, Patriot Ural, Texas, Prost, Crosser, Viking, Forza, the engine used can be different:

• Basin 4-stroke engine. This engine is used for units related to light and middle class devices.
• Diesel 4-stroke engine. This kind of motors are used on heavy and powerful motoblocks designed to work on the most complex parts of the surface.

In more detail about the work of a diesel walk.behind tractor, see

Of course, 2-stroke engines are also found in configuration, but they are used in rather old motoblock models, significantly yielding to 4-stroke in force thrust. However, most consumers get exactly 4-stroke engines operating on gasoline. Their device includes the following systems:

• System responsible for feeding fuel. Consists of a tank with fuel, carburetor, air filter and fuel hose.
• A lubricant system that makes the process of lubricating those parts that rub together.
• Starter providing crankshaft promotion.
• Cooling system that leads heat from the cylinder block of the motor using air flow.
• Ignition system that produces a spark on the spark plug.
• The gas distribution system that provides the flow of the fuel mixture in the motor cylinder, and is also responsible for the output of the exhaust gases.

For a walk.behind engineer device: a driver, a mulch and a do.it.yourself counterweight, wheels for a cultivator. dimensions and drawings

If earlier it was necessary to harmonize and plow almost manually, using the minimum number of auxiliary tools, now this could be done using special equipment. In this case, we are talking about motoblocks. units who are full.fledged assistants in the conditions of the garden and garden. However, the cost of all these equipment is quite high, given the cost of the walk.behind tractor itself, so many masters have adapted to produce new homemade techniques of a particular technical means.

It is not surprising that the growth of such an interest in this technique was associated with the use of various additional equipment of the trailed and hinged type (kun), which significantly expand the functionality of the walk.behind tractor.

About the device of the walk.behind tractor

Next, you will find out which one.based tractor is better to choose.To make it clearer what the principle of home.made manufacturing of the walk.behind tract and its additional components consists in, it is necessary to examine in detail the device of the walk.behind tractor as a means of small mechanization. So, this unit includes several main working nodes:

Engine

As the main driving force, the standard internal combustion engine is used in the design of motoblocks. Depending on the type and brand of the walk.behind tractor, such as Caiman Vario, Patriot Ural, Texas, Prost, Crosser, Viking, Forza, the engine used can be different:

• Basin 4-stroke engine. This engine is used for units related to light and middle class devices.
• Diesel 4-stroke engine. This kind of motors are used on heavy and powerful motoblocks designed to work on the most complex parts of the surface.

In more detail about the work of a diesel walk.behind tractor, see

Of course, 2-stroke engines are also found in configuration, but they are used in rather old motoblock models, significantly yielding to 4-stroke in force thrust. However, most consumers get exactly 4-stroke engines operating on gasoline. Their device includes the following systems:

• System responsible for feeding fuel. Consists of a tank with fuel, carburetor, air filter and fuel hose.
• A lubricant system that makes the process of lubricating those parts that rub together.
• Starter providing crankshaft promotion.
• Cooling system that leads heat from the cylinder block of the motor using air flow.
• Ignition system that produces a spark on the spark plug.
• The gas distribution system that provides the flow of the fuel mixture in the motor cylinder, and is also responsible for the output of the exhaust gases.

It is important that the engine is already sold with all basic working systems, which significantly facilitates the process of home.made manufacturing of a motor block.

Transmission

The main function of the transmission is the transfer of torque from the engine to the wheelbase, as well as the regulation of speeds and the change of movement of the unit. Its design includes several working nodes: gearbox, clutch, gearboxes and differential (not in all models).

The transmission can be several types:

Basically, the classic type of gear transmission is used on heavy motoblocks, and it consists of conical and cylindrical gears.

The remaining types of transmission are used in light and medium types of motoblocks. At the same time, regardless of the type of transmission, the design is located in the design of the power selection, which transmits torque to the working nodes of the unit.

As for the clutch, it can be different:

• In the form of a cuneiform transmission. The essence of the process is in the clutch lever that pulls or weakens the belt, which transfers, or stops the transmission of torque from the motor to the gearbox.
• Single.disc or multi.disc clutch of dry or wet type.
• Conquered coupling.

In most high.quality motoblocks of Sadko, Don, Huter, Profi, Lander, Champion, Carver, the second type of adhesion is used, which is most reliable.

Chassis

The chassis includes not only directly the wheelbase itself, but also the frame structure to which these wheels are attached, and where the main working nodes of the motor unit are located.

In more modern motoblock models, a change in the distance between a pair of wheels is provided, which allows you to adjust the size of the rut of the motor block.

To date, two types of wheels are distinguished. pneumatic and metal with primers.

Basic management elements

The control of the motor block is on the unit handle, responsible for changing the speed and direction of the device. Among the management elements are:

There is no seat for a person in the design of the walk.behind tractor (as in the salute motorcycle unit), so the management itself is carried out by a person with his own hand.

DIRE TRACHENT DIY jack

Stand for a walk.behind tractor, changing the wheels without straining the back, it’s so beautiful))) Made from the simplest and most affordable things. Friends, if you think that the author is worthy of your attention, you can support the channel with a ruble, for this the author will thank you in the next video: Donationalerts.COM/R/RUKASTIYKOLHOZNIK #Unoa Tractor #with his own

Hello.When replacing the wheels with Zhigulevsky, she did not have to remove the shelters?I got the same.based tractor from Dyatka, he only used it with cutters, he never put the wheels.I set the regular wheels, but I had to remove the shelters.It shouldn’t be the same?I don’t understand how it happened, maybe in the store when they bought it, the wheels were given from another equipment, although the new one.based tractor, as far as I know on wheels from the store, is sold.In short, a riddle!

And from below under the handle, a corner for a more stable corner so that they are not afraid that they will fall asleep or be done on you

There is one inconsistency in the jack: try to twist the milling mills by weight. Knives. who are bent to the gearbox will cling to the vertical pipes of the jack. And this will make it difficult to lower the walk.behind tractor. A transition to one reinforced vertical pipe is needed to avoid contact with knives.

Damn turned over all in-no while finding a normal video with a jack. Thanks to the collective farmers :).

Brilliant. I already wanted to raise a talley in the garage))))

Pipets Pryon ((, did 22cm. Dick crawl under a gearbox ((and this is only on a flat surface, not to mention the gardens where you have to changeback Not jealousies,

That he did not really do this to me, and I will tell them one thing on the asphalt only to raise the full

Thank you very much for the dimensions, the uniform tractor Ural raises with a bang. Good and good luck

DIRE TRACHENT DIY jack

Stand for a walk.behind tractor, changing the wheels without straining the back, it’s so beautiful))) Made from the simplest and most affordable things. Friends, if you think that the author is worthy of your attention, you can support the channel with a ruble, for this the author will thank you in the next video: Donationalerts.COM/R/RUKASTIYKOLHOZNIK #Unoa Tractor #with his own

Hello.When replacing the wheels with Zhigulevsky, she did not have to remove the shelters?I got the same.based tractor from Dyatka, he only used it with cutters, he never put the wheels.I set the regular wheels, but I had to remove the shelters.It shouldn’t be the same?I don’t understand how it happened, maybe in the store when they bought it, the wheels were given from another equipment, although the new one.based tractor, as far as I know on wheels from the store, is sold.In short, a riddle!

And from below under the handle, a corner for a more stable corner so that they are not afraid that they will fall asleep or be done on you

There is one inconsistency in the jack: try to twist the milling mills by weight. Knives. who are bent to the gearbox will cling to the vertical pipes of the jack. And this will make it difficult to lower the walk.behind tractor. A transition to one reinforced vertical pipe is needed to avoid contact with knives.

Damn turned over all in-no while finding a normal video with a jack. Thanks to the collective farmers :).

Brilliant. I already wanted to raise a talley in the garage))))

Pipets Pryon ((, did 22cm. Dick crawl under a gearbox ((and this is only on a flat surface, not to mention the gardens where you have to changeback Not jealousies,

That he did not really do this to me, and I will tell them one thing on the asphalt only to raise the full

Thank you very much for the dimensions, the uniform tractor Ural raises with a bang. Good and good luck

Necessary materials

For the manufacture of a walk.behind tractor, the engine from an old moped or motorcycle is best suited, in addition to this basic element, a whole series of different materials will be needed:

• Steel pipe with a diameter of at least 20 mm. It is better to use the most massive base for the supporting frame, which can be processed manually;
• sheet iron for the formation of parts of the case and lining;
• thick steel bar for a supporting axis;
• rotation axis bearing;
• gearbox;
• transmission elements for suspension;
• soil processing system;
• wheels, steel rims or chamber tires with a deep tread.

The list is certainly far from complete, all the elements for creating a mobile unit can be selected only after designing the structure.

Do not forget about the corresponding material for collecting a walk.behind tractor

Typically, with self.assembly of equipment, the factor of saving resources comes to the forefront, and therefore in the walk.behind engines those details that remained from the machines and motorcycles that have become unusable and after a short revision will still be able to serve the owner. An additional source of the base of parts may be the garage of neighbors in the site or automobile disassembly. There is also an option to use the help of numerous blogs, community repair communities with your own hands, widespread on the network.

Also, the master himself will require at least initial knowledge of the installation of an internal combustion engine, gearbox, move gearbox and the basics of metalworking. If a gap is felt in knowledge, it can be replenished using special literature or Internet resources. Take on such a difficult work without any experience a reckless step.

Types of wheels

First you should figure out what types of wheels for a walk.behind tractor generally exist. Since the technique is used in many farm processes, the equipment is different. This also applies to pneumatic sea, because the good result and ease of use depends on the correct components

It is important to note that you cannot put ordinary road wheels from the Oka, VAZ 2121 or “all the options presented below, more and harder on the one.axle tractor

It will be more correct to compare them with kits from ATV, although they do not always have a suitable size.

Pneumatic. This option can be put for arable work and to remove roots from the soil. In appearance, these are large wheels, with a diameter of 40 cm and a width of 20 cm. The drawing on the tread should be rude so that the one.based tractor works well on the basis. Often this option is in standard configuration and is famous for its wear resistance. Nevertheless, if they became unusable, then you should immediately look for a replacement.

Traction. The folk name of these wheels is a Christmas tree. All because of a pronounced pattern on their rubber. This type is also universal and suitable for a ceremonial or standard transport solutions. For example, they are often used by snowball players. Traction tires for a walk.behind tractor are also distinguished by reliability in everyday life.

• Solid (most often made of rubber). All.lit configurations are ideal for rocky soil. They allow the walk.behind tractor to move faster at such a relief and do not deteriorate after the first use. Of the minuses. they are really very heavy, so to endure them is not so easy. Similar tires are suitable for motoblocks of the MTZ series and diesel technology.
• Metal. The last variation is suitable for clay soil. The thing is that, unlike previous wheels, these have steel teeth. This, of course, weights equipment, but in soft ground they do their job perfectly. In another way, metal teeth are also called soil.

As for the general recommendations, when choosing what to put on your uno.based tractor, pay attention to the front wheel. It is supportive and in the process of use amortizes the entire mechanism

This helps to extend the life and improve the quality of work.

In general, such a classification of pneumatic ground is used not only for the walk.behind tract, but also for trailers or other tools from the same category. So she can be safely used, because to maintain the wear resistance of all the equipment in the assortment of the farmer, there should be both a trailer and a single tractor.

Stages of manufacture

The whole process of manufacturing units for a walk.behind tractor with your own hands can conditionally be divided into several stages. First you need to decide which equipment is necessary and what functions it will perform. For example, if we are talking about a trailer, then the structure may change depending on the work performed. Homemade trolley for a walk.behind tractor can have the ability to unload goods on its own. This is very convenient when it comes to the transportation of fertilizers, soils, cleaned vegetables by embankment. In such cases, lifting the body and pouring everything is much easier than unloading it manually.

The next stage is the calculation and manufacture of the drawing

At this stage, it is important that the one.axic tractor and the equipment obtained can work “in pair”. This applies to power, size, fastening method and many other factors

After preparing the drawing, when the necessary materials and tools are known, you can proceed to their preparation. Work will be done faster if everything is prepared in advance. In this case, it will not be necessary to quit work and go to the store for missing details.

And only when all the stages of preparation have been completed, you can proceed with the manufacture. The construction can take a lot of time and effort. But the result is worth it.

Best home.made equipment

Humanizers with a engine from a walk.behind tractor (read a harrow for a walk.behind tractor) are also of a certain interest. Among them, the greatest interest is the manufacture of a snowmobile. As a chassis, you can use a transport tape on which you need to attach snowballs.

In addition, interesting options for the manufacture of other different types of technology from the walk.behind tractor:

• All.terrain vehicles. By the type of design, they resemble a mini.tractor, but have wheels of higher diameter. This is necessary so that the unit can pass through the most and difficult places.
• Minitors. We have already considered this design, which includes an additional part of the frame for the second pair of wheels, as well as the steering wheel and the driver’s place.

Dimensions and features of the manufacture of hedgehogs

The uniform tractor with a nozzle for growing potatoes will save time and effort when caring for this culture. Hedgehogs for weeding are a functional prefix that allows you to win weeds efficiently and quickly and quickly. During the weeding process, the plants are not just cut off, but break out with the root. The earth around the plant rummages well and envelops. Thanks to this, the plant is not only freed from weeds, but also receives enough water and oxygen.

Hedgehogs can be purchased at almost any agricultural store, but at a fairly high price.

Based on diagrams and drawings, you can make them yourself.

It is preferable to use rings instead of disks that will facilitate the entire structure. The sizes of the rings for the manufacture of hedgehogs of the motor block are different. The most common are 240x170x100 mm or 300x200x100 mm. Rings are attached to the pipe through jumpers. Joining should be made at an angle of 45 degrees with a distance between elements no more than 15-18 cm.

Spikes cut from a steel rod 10-15 cm long are welded to the rings and the axis itself. Depending on the size, they are attached to a large ring in an amount of 15 pieces, for small. 5. Also, several pieces can be welded to the axis.

To facilitate the work with the design, a single.based tractor with hedgehogs is equipped with additional wheels.

Potato.cutter for a walk.behind tractor

Potato.bocketing of various types are very popular among farmers. These devices save people from hard manual labor, accelerating the process of harvesting several times. Digging for a walk.behind tractor has a very simple design. You can make it from metal, which remains after the construction and repair of the house.

• corner grinder;
• welding machine;
• electric drill;
• heavy hammer;
• anvil;
• profile steel pipe 20×40 mm;
• reinforcement 12 mm;
• tin (better stainless);
• bayonet shovel.

The prefix to the walk.behind tractor is made in a suspended or trailed (modular) performance. The suspension tool only digs tubers, leaving them to lie on the surface for subsequent manual assembly. Modular type potato.cutter not only removes the crop from the ground, but also collects it in a mobile container on the chassis.

The manufacture of digging is carried out in the following sequence:

• Drawing a drawing. The width of the digger should be within 25-30 cm. The angle of attack of the spinning is taken perpendicular to the couch so that the tool does not bury in the ground.
• Reinforcement is cut into fragments of a given length. With the help of a hammer and an anvil, they are given the required bend.
• A container for tubers is assembled from a profile pipe and tin. A chassis or runner is welded to the container frame. Powders are made of pipes, and the chassis is taken from the old stroller, trolley or lawn mower.
• The holder and rods of reinforcement are welded to the shovel. The drawer is welded to the holder, which is fixed on the assembly container. Compounds are made mobile on bolts or hinges.
• Rusted rust and influx from welding. The finished product is processed by a means of corrosion and covered with paint.

The adjustment and tuning of the digging is carried out using racks and steel screeds.

In the kit, a disk perch can immediately be made to the digger. This tool will be needed when planting tubers after they are buried in a trench done by a plow. Claims of old covers from pots, profile pipe and bolts are made. A cart is assembled from pipes and small wheels, on which holders for the covers are welded under a certain inclination. After sharpening on the stone, discs are installed on holders.

The same.based tractor shoots into the silencer: what to do?

The owner of such a useful and multifunctional technique needs to know that the appearance of interruptions in the work of the muffler can happen due to:

• thin and low.quality metal;
• frequent bumps;
• excessive loads;
• complex work;
• fasteners of an ill.conceived plan.

Often the reason for the appearance of cotton in the muffler is passes in the process of supplying sparks and candles. To get rid of trouble, you need to turn out the candle, combine its body and mass, carrying out the scroll of the crankshaft through the existing starting handle.

In parallel, attention should be paid to whether the spark appeared. If even after these manipulations the situation does not change, it is advisable to carefully clean the candle.

Phased instruction

Karakat from a motor block is a rational investment of forces and finance. All.terrain vehicle from the walk.behind tractor is created according to the scheme. Design the base. You can take ready.made frames. For example, remove from used cars Ural or Izh. They are durable and with maneuverability. The bridge from the back includes both pendants that are made of: racks, mowing, bushings. For the wheelbase of an all.terrain vehicle. It is allowed to use used spare tire from a cargo machine. Transport for SNN LEGOK in riding, with maneuverability. Mount the national engine design so that the all.terrain vehicle performs the necessary functionality. If the installation of the motor is over, they put:

Details from old vehicles are suitable. ATV is distinguished by good patency, maneuverability, safety. It looks like a 4-wheel motorcycle transport. Usually ATV is constructed on a walk.behind tractor from the car Neva. The phased instruction is as follows:

After simple manipulations, the created ATV from the walk.behind tractor is used on off.road. In addition to transport, you can make a SND.

The same.based tractor on pneumatic wheels creates a minimum effect on the road. Home.made tires are used on the bridge from behind, which can be placed on:

You can buy store elements or purchase parts separately (auto.openings, cameras, discs). The assembly scheme is as follows:

By increasing the power of the standard wheels are equipped with a tread. For fastening cameras, chains, tracks made in the workshop are suitable.

popular home.made models with a motor block were described. However, this is the ingenuity of masters from the people, in relation to such an unit does not end. Residents of the North have long appreciated the advantages of aerosics, motorcycle, snowmobiles. A mini.tractor or tugboat on the motoblock motor is actively used by farmers.