What gasoline to refuel a Patriot chainsaw. What gasoline to fill in the chausopila Husqvarna

What gasoline to pour in a chainsaw

Chainsaw is a convenient unit that can solve a lot of household problems. Works on fuel, which must be prepared independently immediately before pouring it into the tank. Those who have acquired a functional device for the first time are interested in the question of which gasoline to fill in a chainsaw. It is possible to avoid breakdowns and extend the life of the device only if the manufacturer’s recommendations specified in the instructions are followed.

Modern brands of chainsaws (Husqvarna, Partner) from foreign manufacturers in uninterrupted mode will work on AI-92 gasoline-it will be ideal for the engine

Mark 95 may also be indicated in the user manual, but it must be poured with caution. The quality of this gasoline is currently questioned, its octane number increases using various additives

This is detrimental to the chainsaw engine, which can lead to the overhaul of the unit. And its cost will be at least half of the cost of the new model, not counting the spare parts to be replaced.

For devices from domestic manufacturers (Ural, STIHL, friendship), AI-80 gasoline is recommended

For the user, it is important that his consumption is minimal

Gas and oil proportions

In view of the two.stroke type of engine, fuel is purchased separately in its pure form, after which it is mixed with oil intended for this engine option. Most experienced users mix substances in 1:50 proportions. In the photo you can see the popular high.quality products used to prepare the fuel mixture.

Important points that need to be observed:

• Domestic chainsaws (Ural, STIHL, Friendship) work with a component of oils of brands M8-V, M-12TPU, M8-V, TP, MGD-14M, sometimes foreign options can be used-100 g of oil per 2.5 liters of gasoline AI-80 brands
• Foreign models (Husqvarna, Partner) work on foreign oil oils (1:50 or 1: 40), differ in a minimum of consumption.

How to prepare a fuel mixture correctly

When purchasing gasoline for chainsaws and oil, you should think about additional accessories. The following tools are used to measure the mixture in the chainsaw: the following tools are used:

• Breeding capacity (plastic or metal),
• syringe,
• A measured bottle (suitable to measure gasoline),
• dispenser,
• watering can (pour into a chainsaw).

A very convenient thing is a special bottle with a dispenser from the STIHL brand (in the photo), which allows you to perform all actions neatly and quickly, accurately measuring the right amount of each substance

Choosing gasoline for the Stihl chainsaw (friendship, Husqvarna, Partner), pay special attention to the second component

Oils from different manufacturers have variations of shades. The products of the manufacturer HP. red, the premium segment “synthetics” is mainly represented by green. If you take gasoline for the Husqvarna chainsaw, then the oil should be the corresponding brand, not cheap (green or blue in color). In the video you can watch the process of mixing fuel.

Useful tips

Experts and manufacturers do not recommend harvesting a large amount of fuel and store it for a long time. Oil and gasoline can “behave” in a mixture in different ways, it all depends on the brand, quality, degree of additives and additives. Oxidation and crystallization processes occur. The result can be deplorable and carry additional financial costs for the user: incorrect work or engine failure.

The fuel is prepared for a maximum for three gas stations, mixing in metal containers or durable plastic. Normal plastic is destroyed, reaction with gasoline, spoils the composition of the fuel and creates the danger of sudden ignition.

Gasoline consumption and working hours

An important question is the consumption of gasoline gasoline, because the user must understand what to count on.

The volume of fuel tanks is approximately 0.5 liters. When the power of the device is 2 kW, gasoline with oil will be about 1.2 l/hour. Translating a language into an understandable user. about 30 minutes of a chainsaw can work in uninterrupted mode at maximum speeds. Less powerful devices have a smaller tank volume, gasoline consumption is controlled by the owner independently.

Over time, you will learn how to independently provide service for this economic unit. The main thing is to maintain its performance and use only high.quality fuel. You need to mix in compliance with safety rules so as not to cause damage to your health or environment.

STIHL 180 chainsaw. malfunctions and repair

There are a number of typical breakdowns, which are most often faced with owners of the STIHL MS 180 model. Having studied the reasons for their appearance, the roller will be easier to eliminate breakdowns with your own hands.

Why not start a chainsaw STIHL 180?

The main reason for this malfunction is the poor state of the spark plug Stihl MS 180. If it is dry, then the fuel does not fall into the cylinder. If the candle is wet, then you need to find the place of the fuel pipe.

In any case, for further work with the STIHL MS 180 saw, you need to unscrew the candle, clean it from soot and dry it. The same must be done with the details located under the candles. At the end, the candle will need to be screwed into place and continue to work with a saw.

Why flies a candle on the chainsaw of Stihl 180?

The essence of this breakdown is the problems with the carburetor. For repair, you will need to remove this element, as well as check its membrane. In working condition, the detail should be not only whole, but also elastic. If the membrane was boiled, then it will need to be replaced.

Before the reverse assembly of the STIHL MS 180 carburetor, it needs to be cleaned of dust and soot. To do this, use compressed air in the cylinder. After the node completely dries, it can be assembled and installed back on the chainsaw.

What to do if the oil does not enter the chain of the chain of the Stihl 180 chain?

If the chain is not lubricated on the German saw of the Stihl MS 180, then this indicates the blockage or malfunction of the highway through which the oil circulates. To solve the problem, you need to remove the tool handle, pull out the hose and clean it. After that, the hose must be installed back on the saw, and grease the installation site with a sealant.

Another reason due to which the oil is not supplied is the blocking of the STIHL MS 180 pump. To correct the situation, you will need to remove the pump and rinse it in pure gasoline. If this did not help, the detail will need to be replaced.

Stihl 180 chainsaw is stalling when pressing gas. how to solve the problem?

If the model stalls when typing a speed engine, then this indicates a clogging of the fuel filter. Because of this, the element is not able to pass the fuel that is necessary to increase the speed of the ICE STIHL MS 180.

In this case, it is necessary to remove the fuel filter and rinse it with clean gasoline. If this did not help, then you need to carefully check the factory air filter. If a large amount of garbage has accumulated in it, then it will need to be replaced with a new element.

What to do if the saw stalls at idle?

If the Stihl MS 180 chainsaw stalls some time after launch in idle mode, then this indicates a breakdown of the fuel pump. To make sure of this, you need to use the vacuummeter. If the device has shown the pump malfunction, then the mechanism will need to be replaced.

Another cause of the malfunction is the wear of the Stihl MS 180 seals. After a long use of a saw, they lose their shape and elasticity, missing a large amount of fuel. In case of wear of the oil seals, they will need to be replaced.

The chainsaws are poorly started on the cold. elimination of the breakdown

Most often, the cause of this malfunction is the initially incorrectly established gap between the ignition coil and the flywheel of the Stihl MS 180 chainsaw. In this case, you need to disassemble the tool and make measurements between contacts and flywheel.

If the gap is more than 0.2 mm, then it must be reduced using a pair of side screws. To do this, between the flywheel and the standard ignition coil, you need to insert a paper business card or calendar. After that, by turning the screws, the flywheel must be brought closer to the ignition coil so that they hold the business card. At the end, it remains to gently extract the paper and collect the saw.

What gasoline to fill in a chainsaw?

The main component of the fuel mixture for modern chainsaws is gasoline with an octane number of at least 92.

Materials are unsuitable for use:

The possibility of using gasoline A-95 as a fuel for a chainsaw is doubtful due to the high content of anti-depth additives in it. This fuel can only be applied with complete confidence in its quality.

Old models of domestic chainsaws can work normally on A-76 gasoline, while modern foreign models will not “appreciate” it.

Gasoline for a chainsaw should be fresh, since with long.term storage it loses its characteristics. in particular, the octane number of fuel decreases, which negatively affects the engine power.

It is worth noting that the failure of the saw due to poor.quality gasoline is not a warranty case. That is why the elimination of this problem will cost an expensive.

What oils are used for benzo tools?

Manufacturers produce two types of chainsaw oils. motor and chain. The latter are poured into a separate tank and are spent to lubricate the chain during the operation of the tool. For the manufacture of the fuel mixture, they cannot be used.

The most popular motor oils for chainsaws are materials that, according to the classification of American Petroleum Institute (API), belong to the category of TB. API TC oils are used somewhat less often. in cases where they are recommended by the tool manufacturer.

To prepare a full.fledged fuel mixture, it is advisable to choose branded oils (STIHL, Husqvarna, etc.D.) or their branded analogues (Sadko, Kraissmann, Oleo-Mac Prosint, etc.). Experts extremely do not recommend pouring materials for two.stroke moped engines, boats and other mechanized equipment into chainsaws.

It is important that the lubricants are fully burned, so it is better to use products on a synthetic basis, which produce less smoke and other combustion products. In addition, they contain anti.oxidative, detergents, cannibal and other additives useful for the work of the power unit.

Option of alternative fuel

For refueling household and professional chainsaws, it is recommended to use non-alcohol components and additional additives-car gasoline type AI-92.

The question of whether it is possible to pour 95 gasoline into a chainsaw to date remains controversial. Theoretically, the AI-95 gasoline is higher than that of the standard AI-92 fuel, but in practice it is better to give preference to the second option.

The problem is that in order to increase anti-depth characteristics, additives and sales are introduced by manufacturers and sales, the quality and efficiency of which in specialists causes reasonable doubts.

Such fuel does not fully meet the required characteristics, does not have proper stability during long.term storage. After 3-4 months of exposure, its working properties worsen by 25-30%.

Criteria for choosing motor oil

For independent preparation of the combustible mixture, in a dosed amount, the heat.resistant branded engine oil recommended by the manufacturer.

• The specifics of this lubricant is the use of air cooling in high.speed ICE, which are equipped with a chainsaw of a household and professional class.
• Depending on the season, for the preparation of the combustible mixture, motor oil of different densities is used, which retains the working properties in the temperature range indicated on the label.
• For use, proprietary oils are recommended, providing a full lubrication of the piston group and a connecting rod-crown mechanism at all operating modes of the power unit.
• Brand products are colorful. In particular, Shtlevsky mineral oils are red, synthetic is painted green. Husqvarna branded motor oils. blue or green.

Even taking into account the lower cost of mineral oils, it is recommended to use the advantages of synthetic analogues for the preparation of high.quality fuel mixture.

Criteria for choosing motor oil

For independent preparation of the combustible mixture, in a dosed amount, the heat.resistant branded engine oil recommended by the manufacturer.

• The specifics of this lubricant is the use of air cooling in high.speed ICE, which are equipped with a chainsaw of a household and professional class.
• Depending on the season, for the preparation of the combustible mixture, motor oil of different densities is used, which retains the working properties in the temperature range indicated on the label.
• For use, proprietary oils are recommended, providing a full lubrication of the piston group and a connecting rod-crown mechanism at all operating modes of the power unit.
• Brand products are colorful. In particular, Shtlevsky mineral oils are red, synthetic is painted green. Husqvarna branded motor oils. blue or green.

Even taking into account the lower cost of mineral oils, it is recommended to use the advantages of synthetic analogues for the preparation of high.quality fuel mixture.

The risks of the use of fuel and oil surrogates

The structural features of the ICE of the chainsaws of the domestic and imported assortment exclude the use of more affordable biofuel and gas condensate gasoline substitutes. The working characteristics of such fuel at the moment are far from perfection.

In the total volume of sales of motor oils, falsified lubricants according to various information are from 8 to 15%. Only an experienced specialist can distinguish original products from a fake.

To exclude possible risks of early failure of the saw, it is recommended to purchase expenditure materials at company retail outlets and representatives of dealerships.

For all external similarities, it is forbidden to use for the preparation of the working fuel mixture of oil for two.stroke internal combustion engines of mopeds and light motorcycles. The application of unnecessary lubricants may initiate the refusal of service services from warranty obligations.

How to mix

In order not to spend a lot of time on preparatory operations and not store a large amount of fuel mixture, it is usually prepared in an amount equivalent to 3-4 gas station gas stations. It is possible to make a mixture correctly only if there are measuring dishes.

Some tool manufacturers include special containers with clean gasoline levels and its mixture with oil.

In general, you need to take a clean and dry bottle or canister and pour the required amount of gasoline into it with a funnel. After that, dilute gasoline by adding oil to it. It is convenient to measure it with a syringe of the desired volume without a needle. Close the capacity with a lid and achieve uniform mixing with oscillatory movements. The oils used are painted in bright colors, so the finished mixture will have a shade by which it can be easily distinguished from pure gasoline and confidently tucked into the tank.

Fuel consumption

One of the most important issues that arises from the owners of the saw.tool, because everyone wants to know what to count on.

The volume of almost all tanks is approximately 500 ml. If the power of the chainsaw is 2 kW, then the fuel mixture consumption will be approximately 1.2 liters per hour of operation. If you simply say, such a tool will be able to work for half an hour without a break at maximum speeds. If the chainsaw is not so powerful, then the volume of the tank will have less. So the user can independently control the fuel consumption.

Over time, the user will learn without any help to serve his tool. The main task is to preserve the economic unit in good, working, using high.quality fuel mixtures. Observe the safety rules when preparing combustible fluid. This will help save the tool, and also not harm yourself and the environment.

Useful tips:

The correct operation of your technique is fully dependent on you. First, do not disdain manufacturers with indicators or, in extreme cases, with indications on the oil packaging. This will help to avoid unpleasant situations. The neighbor does not always know how best to do. Cheapness of oil and gasoline is not an indicator of high quality, because a tool breakdown can do much more expensive (about 80 % of the cost of a chainsaw) than the agricultural mixture saved on the fuel mixture.

The Patriot model range, overview of the most popular chainsaws

The Patriot lineup consists of domestic chainsaws. They are not intended for daily, many hours of operation. Patriot positions some tools in the line as professional and semi.professional, and so, remember, in the lineup there are neither those nor others. None of them can withstand a large load, t.to. They simply are not designed for this. If you need a professional tool, it is better to pay your attention to saws such as Stihl 880 or Husqvarna 365.

Based on the review of customers and sales statistics, the best.selling Patriot chainsaws are: PT 3816, PT 4518, PT 5220.

Consider each of them in more detail.

Patriot Pt 4518 chainsaw

I drank a household segment. On sale is found under two names: Patriot Pt 4518, Patriot Pt 4518 Imperial. These are exactly the same chainsaws, they have no differences in them. The appearance of several names is associated with the marketing moves of the company.

Of the advantages, it is worth noting a powerful 2.1 kW engine. The working volume of which is 45 cubic meters. cm. To launch a volumetric engine, engineers provided an easy launch system. Easystart. It significantly reduces the effort during starting, thanks to an additional spring in the starter.

Of the shortcomings. weight. Without refueling and sawing headset, the weight of the tool is 6.5 kg. This is a lot for the domestic class.

According to numerous reviews of real owners, the chainsaw calmly copes with the cut of wood of large diameters.

You can read more about the tool in a detailed review on the Patriot 4518 chainsaw, published on our website.

For visual operation of the chainsaw, we recommend that you look at the interesting

Patriot PT 5220 semi.professional chainsaw

The word semi.professional. does not mean that it can be used for 8 hours a day and 7 days a week. This only means that powerful chainsaws and from time to time can calmly saw trees of large diameters. than 40-45 cm.

A 2.5 kW engine is installed on the chainsaw (3.4 liters.With.), 52 cubic meters. cm. As well as 4518, it has an EASYSTART system for lightweight launch. The manufacturer claims that this system reduces the load during launch by 60%. Time showed, with all its power, the engine has a reduced resource and high fuel consumption.

In standard configuration of chainsaws, 20 inch sets are equipped with a 20.inch. The chain is high.quality, for a long time holds sharpening.

Weight. Weight. 9 kg without fuel, oil and headset! For a long time you will not work with such a weight, your hands will get tired quickly.

Earlier on our website, a detailed review on the Patriot Pt 5220 chainsaw was already published.

Patriot Pt 3816 chainsaw

Patriot 3816 is considered a chain of domestic class, which is great for performing simple tasks:

The tool is not suitable for firing trees of large volumes, but if you want, it is quite possible to tie a tree with a diameter of up to 1 meter.

Patriot 3816 chainsaw has gained popularity thanks to a good price ratio for quality. It is not whimsical, fuel consumption is low, consumables are not expensive and available in any spare parts store.

Their important characteristics should be noted a 38 cubic engine engine. cm., 2 l.With. (1500 watts.) and tire 40 cm long. The tire and chain of Oregon are immediately supplied with a chainsaw.

Earlier on our website, a detailed review on the Patriot Pt 3816 chainsaw was already published.

In addition to these three whales, there are even less popular Patriot chainsaws that require attention.

Patriot Pt 554 Pro

A 50 cm long tire and a 2.5 kW motor power, allow you to effectively use it for home needs. Suitable for the harvesting of firewood, cuts of branches, not large trees and other small works. One of the serious minuses is heavy, weighs 5.1 kg. Appetite moderate for such engine power.

Patriot Pt 555

Of the pluses. engine power 3 horsepower. Weight. 7 kg. The chainsaws are really powerful, it can be sawed by large trees, positioned by the manufacturer as professional, although it is not such. The engine parts are not designed for permanent operation, the chainsaws are suitable for those who need to cut something massive from time to time.

For easy work, Patriot PT 555 is not suitable due to its large weight.

Patriot PT 2512

Basil for tourists. The case is made in such a way that it can be kept even with one hand. Tire length is only 30 cm. Engine power. 1.3 liters.With. And weight. 2.9 kg. For adjustment of the chain tension, no additional tools are required.

Frequent malfunctions of the Patriot Pt 3816 chainsaw and do.it.yourself repair

As mentioned earlier, shock absorbers often break off on the Patriot 3816. Replacing them is easy. It is enough to promote two screws holding the shock absorber, remove the defective part and install a new one instead.

Another frequent Patriot 3816 malfunction is a cliff of the clutch spring. Diagnosing this malfunction is easy, t. to. The chain of the chainsaw will spin constantly, and the saw will stall, if you idle to put the tire on the chock, trying to stop the rotation of the chain.

To replace the clutch, it is necessary to remove the top cover of the engine and unscrew the candle, then, through the candle hole, with the help of the lace, the piston stroke. Next, you need to remove the side cover, chain and tire from the chainsaw, thereby providing access to clutch. After that, with the help of a special key (you can use the key to the angular grinder), spin the clutch.

The clutch has a reverse thread, so it spins clockwise.

The collection of the saw is carried out in the reverse order.

Fuel mixture preparation rules

The mixture for the chainsaw is recommended to be prepared immediately before starting work. Its storage for more than 10 days can lead to chemical reactions between additives that are part of the oil and components of gasoline. This will negatively affect the operation of the engine and the composition of exhaust gases.

If the use of the tool stops for a long time, the contents of the tank are drained or stable at idle until a spontaneous stop of the motor.

Dilute oil in gasoline in the proportion recommended by the manufacturer of the tool. For different models, the ratio may change from 1:20 to 1: 100. For the chainsaw of Stihl 180 it is 1:50. This means that for 1 liter of AI-92 gasoline you need to take 20 ml of oil. Deviation from these numbers can affect the operation of the motor:

• a decrease in the fraction of the oil will lead to mechanical wear of the cylinder and piston;
• Excessive amount of oil will cause incomplete combustion of the mixture.

It is strictly forbidden for two.stroke engines to use oil intended for other types of engines, especially working out.

STIHL chainsaw What gasoline 92 or 95

What gasoline should be poured into a chainsaw

Hello! Glad to see you, dear readers and subscribers of the blog Andrei Noac. Everyone who has a chainsaw, he already knows exactly what gasoline is and how to fill it. But for someone who wants to purchase such an unit, the article will seem interesting.

Chainsaw. One of the most convenient and universal household appliances. Before use, you need to prepare the fuel mixture. But in order for the device to work correctly, it is necessary to follow all the recommendations of the manufacturer. Each model is individual, and what gasoline is poured into a chainsaw?

Under the stamps

For modern brands, for example, Husqvarna, Partner, Makita, Echo, Calm AI-92 gasoline are suitable. Today, a huge number of people complain about the premature refusal of a chainsaw due to poor gasoline. Therefore, some experts recommend that the AI-95 chainsaw join such chainsaws. At the same time, a good AI-95 can “burn the piston”, and again a number of people found a compromise and mixed AI-95 with AI-92. In general, it all depends on the quality of gasoline and, ultimately, you decide.

For domestic devices, the Urals, friendship, it is recommended to take gasoline AI-80. It is very important that fuel consumption is minimal.

Make a mixture: important proportions

When using a two.stroke engine, pure fuel is purchased separately and mixed with oil, often in 1:50 proportions. In such a engine, it is constructively impossible to install an oil pump, so it is strictly forbidden to fill gasoline into a chainsaw! Proportions, quantity and some brands indicated by the manufacturer in the operating instructions.

• Internal chainsaws work with M8-B, M-12 TPU, M8-B, TP, MHD-14M oil. In some cases, you can use external options;
• Proportions: 2.5 liters of FI-80 gasoline per 100 g of oil;
• Foreign models are characterized by a minimum fuel consumption. They work for other people’s oils, and their proportions become 1:40 or 1:50.

Read Basopile stalling when pressing the gas worked without a filter/Chainsaw Stalls When Pressing on Gas

Fuel mixture

To properly prepare fuel, you will need a list of additional tools:

• Plastic or metal container for breeding a substance;
• Measuring bottle for gasoline;
• Spray;
• Syringe;
• Watering for filling the chainsaw.

Some manufacturers, such as STIHL, immediately produce measuring containers for a more convenient measurement of the fuel mixture.

Various manufacturers produce oils of different shades. HP manufacturer produces red liquid. Green oil is a premium segment of “synthetic”. For a Husqvarna chainsaw, you need to take the appropriate oil. It differs in high cost, good quality and has green or blue.

Stihl, that gasoline is used 92 or 95?

What is better to fill.92 or AU95.

What gasoline should I fill in 92 or 95?

We will tell you everything about the fuel mixture for gasoline tools. We will spread popular myths and give answers to the largest.

The main thing. correctly calculate the proportions of the mixture. Excess oil can form carbon deposits on pistons and candles. Excess gasoline

can cause damage to the engine or piston clogging. Each manufacturer gives its proportions to models of various capacities.

For mixing components, additional accessories are needed. You will also find special canists with two openings for oil and gasoline on sale. Everything is very simple here, we pour the ingredients, tightly tighten the lid and mix, tilting the container. You can use glass and plastic bottles.

Read Oil in gasoline for Husqvarna chainsaw

Do not allow water or dust to get into the fuel mixture.

Good to know

Fuel should be prepared by counting on 3 gas stations. After storing a large amount of fuel, it can negatively affect the work of the chainsaw. The mixture can behave differently because it will influence many factors. As a result, your household can get a serious breakdown that will entail financial costs.

Sometimes even power can affect the quality of the liquid. Plastic and glass react with gasoline, which can create a risk of sudden ignition.

It is important to remember that in the case of a faulty chain saw due to poor quality or improper mixing, it is impossible to restore the factory guarantee.

The finished liquid cannot be stored for more than a month, since the process of oxidation occurs. After working with a chainsaw, you need to use the remaining fuel, turn off the engine and remove the remaining fuel mixture.

Fuel consumption

One of the most important issues that arises for the owners of the tool, because everyone wants to know what to expect.

The volume of almost all containers is about 500 ml. If the power of the chainsaw is 2 kW, fuel consumption will be approximately 1.2 liters per hour of operation. If you speak simply, then such a tool will be able to work at maximum speed for half an hour without a break. If a chainsaw

not so strong, then the volume of the tank will be smaller. Thus, the user can independently control the fuel consumption.

Read how to work properly a chainsaw stihl

Over time, the user will study without any help to maintain his tool. The main task will be to maintain an economic unit in good working condition using high.quality fuel mixtures. Follow the safety rules for the preparation of combustible fluid. This will help save the tool, and also do not harm yourself and the environment.

Useful tips:

• Sometimes it is better to pour oil, not regret. If you give a little more oil than indicated in the instructions, then nothing terrible will happen. The formation of sediment is possible in the case of a large amount of oil, and if these proportions are not observed;
• Keep the finished mixture better for a month and no more, because for some reason it will lose its qualities;
• Correct completion of work. It is necessary to use or drain the contents of the tank so that you can extend the operation of rubber and plastic seals;
• There is no need to use the oil for the chainsaw designed for mopeds because it is designed for small speed.

How to refuel a chainsaw

Consider how to refuel a chainsaw. If the saw is seasoned incorrectly, this may threaten the life and health of the device operator.

There are rules that must be executed when refueling a saw:

• You can not pour oil and fuel mixture;
• the place where the sawing will be refueling should be even;
• The place should be removed from the zone where the device will be operated by more than 2 m;
• The site should be located far from the fire; You can’t smoke in this place;
• At a time when a fuel tank is filled, you need to fill the oil tank, which is designed for automatic lubrication of the chain; You can distinguish containers by special icons;
• Before pouring, it is necessary to wipe the neck of the capacities with a rag;
• During operation, lubrication and gasoline can not be allowed, so you need to be neat when the canister covers is unscrewed; When refueling, it is better to use a funnel;
• Caution should be observed when tightening the cover with the latch;
• Experts advise filling the container not completely, but leave a little free space.

During the operation of a properly refined chainsaw, it is necessary to regularly check the tightness of the containers and the operation of the motor. If the chain heats up greatly, or gasoline is consumed too quickly (faster than oil), this should cause alertness. Before starting work, the chainsaw is performed.

With proper operation of the 1 tank, the gasoline tank should be enough for 30 minutes of operation of the device with the maximum load. When gasoline ends, the lubricant in the second container still remains, but in a small amount.

Storage recommendations

The mixture must be prepared in the amount that is necessary for the implementation of a small volume of work, since with prolonged storage of the solution its qualitative characteristics worsen. The prepared mixture must be spent for several days.

The fuel mixture, which was stored for about a month, reduces the characteristics of the engine operation. Smolish substances are formed in nodes, and soot appears, piston rings lose mobility. The largest shelf life of the mixture is no more than 2 weeks. During this period, the solution will not lose its quality. If the air temperature is more than 25ºC, then the shelf life of the product is reduced to 10 days.

Some experts allow the use of overdue mixture to save. To do this, it can be spent gradually, gradually mixing in a fresh solution in a volume of not more than 10% of the total amount of the mixture. The finished gasoline mixture must be filtered.

If you follow all of the above recommendations, then you can ensure reliable operation of the chainsaw. Also, when performing work, it is necessary to observe safety precautions, since the chainsaw rotates with high speeds and, in case of violation of the operating rules, can be a danger to the worker himself and the people around him.