The main differences between the counterfeit and the original Makita
Makita has gone to great lengths to protect their power tools. Therefore, even by visual inspection, fake products are easy to distinguish. However, this must be done with utmost care.
The case in which the Makita power tool is supplied;
First of all, you should take a closer look at the container. The original and the fake are almost identical in color, but in the latter, it may be too bright. In addition, you need to carefully consider the brand lettering. in the original, the name “Makita”. embossed and letters are embossed.
On a fake case, the brand name appears as a low-grade sticker or in hand-pasted letters. It is easy to check it. they are simply torn off with a knife, a fingernail. Therefore, when purchasing any Makita tool, inspect the suitcase with the device with extreme caution.
Further, the case latches can give out a fake. On the original containers, they have the brand name. “Makita”, and are made of gloss. The rivets on the fake suitcase are nameless and matte.
The gaps that are located on the lid of the suitcase are also different in the original and the fake. In the first, they may be completely absent or have the same shape. In the second case, gaps of different shapes are made absolutely not of high quality.
IMPORTANT! The backlash of the original is very high quality, without dirt. A fake cannot boast of this.
Close attention should be paid to the back cover of the case. The original ones have the “Makita” brand inscription in embossed white letters. The fake suitcase does not contain this.
IMPORTANT ! Opening the original, you will see that each part has its own production number.
Taking the tool out of the case, you need to look at the device’s nameplate. This is a small table showing device markings, Makita country of origin and other additional information. In fake ones, it literally “eats out” the eyes, which gives out a fake instrument.
The original has a duller Makita lettering. While a fake is straightforward, it cuts your eyes with a bright red. Now regarding the markings:
- On real nameplates, the serial number of the unit is located next to the model brand. In counterfeit ones, the location of the production number is below the table;
- In genuine Makita devices, the table contains the markings for use;
- The Japanese manufacturer on the original tools is indicated as Makita Corporation Anji, Aichi, Made in P.R.C. In fakes, the last inscription is missing, or has different letters. China, Malaysia.
IMPORTANT ! Makita does not manufacture tools in the CIS. Original markings and countries where Makita factories actually exist:
- A. USA (USA).
- D. Germany (Deutschland).
- E. Japan (Japan).
- G. Great Britain (GB).
- R. Romania.
- Y / K. China (China).
As you can see from the list, the original China is designated differently.
INTERESTING: Now on the market you can find “gray” models of electrical appliances. They are original, but not all markings are present on them. The main difference is that such Makita tools were imported into the country illegally. Even in spite of their authenticity, these models are not supported by the manufacturer. Therefore, there will be no warranty repair.
Now you need to take a closer look at the inscription not in the table, but on the instrument itself. Like the case, the original appliance bears the Makita brand name in embossed raised letters.
The color of the body of the device is greener than the original, and blue for the counterfeit. over, the latter does not have the manufacturer’s inscription on a black base, the original has it.
Also, you should pay attention to the quality of the plastic parts of the device. In the original, they are made with high quality, even shape, the casting of fake components immediately catches the eye. traces of burst, poor-quality edges.
For example, in original Makita rotary hammers, there are several inscriptions on the additional handles of the devices. One is made by indentation, and the other is white. Fake ones do not contain letters at all.
IMPORTANT ! There are such models “Makita”, which have a sticker on the body with the name. However, if you tear it off, then under it there will be an indentation Makita lettering.
Makita tools: distinguishing the original from the fake
Makita Japanese electrical appliances are one of the most popular brands on the market. This is definitely a good thing, as the leadership shows the high quality of the instruments. However, there is a downside to the coin. with the growing popularity of “Makita”, the number of cheap Chinese counterfeits increases sharply. Therefore, today we will talk about how to distinguish the original of the Japanese manufacturer Makita Corporation from a fake tool.
Why Makita’s fakes are dangerous?
By saving on the purchase of a building device, you are putting yourself in great danger. Fake products do not follow the production technology, so the devices may fall apart during operation and cause harm.
Buy only original Makita appliances, and you will forget about problems forever.
First glance
High-quality screwdrivers from well-known brands can be distinguished immediately, at first sight and by touch.
It has a balanced weight, fits perfectly and comfortably in the hand, and the material of the case is of high quality and reliable. Every part of a good electric screwdriver fits tightly and precisely to its neighbors. There are no backlashes and uneven gaps between them. Fakes are usually painted immediately assembled, while quality models are assembled from already painted parts. That is, paint sags and unevenness of its application should immediately raise suspicions.
The electric screwdriver should lie comfortably in your hand, not creak or hang on one side. And in general, high-quality models use plastic, which has a matte coating on the outside, but fakes and copies are almost always smooth, as if glossy.
Details and functionality of the screwdriver
It is difficult to identify poor-quality parts inside the screwdriver. The only thing you can focus on when buying is weight. An electric screwdriver that is too light should raise questions. This is due to the fact that quality products usually use metal components. While the fakes are plastic. And naturally, various gears and moving mechanisms fail faster.
Reverse functions, gear shifting, automatic head locking and power regulator. a standard set of functionality of a good tool
It is also worth noting that cheap fakes have a small number of different functional features. For example, rotation speed, power, reverse, head auto-lock, etc. The fact is that the implementation of such functionality requires the introduction of additional parts into the screwdriver and the use of special technologies. And this is already costly for factories engaged in counterfeiting.
Which cordless screwdriver is better: an overview of popular manufacturers and models (professional, semi-professional and household), average prices, the device of an electric screwdriver, selection criteria. read the publication.
Battery charge and type
In fact, when buying a screwdriver, the user pays most of the cost not for the device itself, but for the battery and charger.
The more batteries, the more charge and, accordingly, the weight
That is, the most expensive thing in a screwdriver is the battery. And you can save money on this in the production of fakes. What, in fact, is being done. It is rather difficult to distinguish a high-quality battery “by eye”. In order for the battery to have a good capacity, several cans with batteries are used in it. The more there are, the more charge the battery can take. This means that a good battery with a declared high charge should weigh decently.
But here, too, there is a problem: very often there are batteries that are approximately equal in weight to the originals, the charge of which holds very poorly. Autopsy revealed that several cans were simply filled with sand for weight. By the way, this is very common in Chinese power banks. It is extremely difficult to recognize such a battery, since it will show itself only in operation: after charging, it will most likely be able to work 2 or even 3 times less than the original. If the price of a high-capacity battery is too low, then with a probability of 99% we can say that it will not hold a charge.
Well, it’s worth saying a few words about the charger. This is the part of the screwdriver components that you shouldn’t save on at all. The fact is that cheap chargers often do not have mechanisms to protect the battery from overheating and overcharging. And this can further result in high costs for new batteries, since they will very soon fail with such operation.
Electric screwdriver warranty
Naturally, reputable brands are responsible for the quality of their products, therefore they give a guarantee and have a network of service centers around the world. The user, faced with a malfunction, can always count on a service center that will help to quickly fix the breakdown. But buying a fake is almost always a pig in a poke. It is not known what and when will break down and how to repair it later. You will have to use third-party services or try to fix the situation on your own.
A list of service centers is usually supplied with the warranty card.
In general, the guarantee not only gives the user confidence that nothing will happen to his tool, but also makes it possible to repair it in the event of a breakdown.
Housing
External differences in the case are not obvious, you should take a closer look. It is possible to unmistakably identify a fake by the two sleeve chuck and the gray color of the tool power adjustment scale. On the original, the scale is drawn on a black background.
The tag on the Makita branded electric screwdriver is metal, contains information about the manufacturer, and the serial number and production date are stamped on the metal. On the replica you will find an ordinary sticker.
It is worth paying attention to the hook for attaching the tool to the belt. On a fake electric screwdriver, it can be hung and fixed in a certain place, and on the original. on both sides.
Packaging
It is also worth paying attention to the instructions and the passport of the device. The original tool is accompanied by passports for the electric screwdriver itself, a charger, as well as an instruction manual in English and Russian from the Makita brand, and a quality certificate.
The complete set of a fake, at best, will be limited to instructions in a foreign language without specifying the brand of the instrument.
Accumulator battery
The fake battery has striking differences from the original, so it is quite easy to determine the replica for this part.
The Makita proprietary electric screwdriver is supplied with a 10.8 volt lithium-ion battery. A fake, with a similar capacity of 1.5 A per hour, is 18 volt and has the appropriate marking.
The battery from a fake electric screwdriver will definitely not fit on the original, since the battery of the latter has a seal on one of the screws and differs in the location of the sockets.
The branded battery is supplied only with the control unit, if we talk about the filling. In the replica, you will find the control board and the charging unit right in the battery itself.
Capacitive elements on Makita are supplied by Sony or LG, as evidenced by the marking. Similar elements of the replica indicate the identification that corresponds to the batteries in household flashlights.
Filling
If the instrument was purchased from an authorized representative, it is not recommended to disassemble it, as there is a risk of losing the possibility of warranty service.
In the stuffing of the original Makita electric screwdriver and the fake one, you can find differences in the following details:
- switch. in a replica, it has the simplest design and sharp corners, similar to those that are installed on Chinese-made tools;
- motor. has some structural differences. The original can also be identified by the laser markings. In the replica, the engraving of the motor is made by the method of spraying and corresponds to the class of products installed on Chinese-made tools.
Counterfeit tools can last for quite a long time, provided they are used carefully. However, when buying an original Makita electric screwdriver, you can be confident in the reliability of the device, as well as get warranty repair if necessary.
Battery
Pay attention to the characteristics of the battery of the model you are going to purchase. Often, a fake can be identified by color and shape.
Housing
External differences in the case are not obvious, you should take a closer look. It is possible to unmistakably identify a fake by the two sleeve chuck and the gray color of the tool power adjustment scale. On the original, the scale is drawn on a black background.
The tag on the Makita branded electric screwdriver is metal, contains information about the manufacturer, and the serial number and production date are stamped on the metal. On the replica you will find an ordinary sticker.
It is worth paying attention to the hook for attaching the tool to the belt. On a fake electric screwdriver, it can be hung and fixed in a certain place, and on the original. on both sides.
Release Button Color
In the original, it is grayish in color. Red is fake.
Information sticker
The original case always has a sticker with the serial number and marking of the country of origin. The number on the case must match the number on the instrument.
Packaging
It is also worth paying attention to the instructions and the passport of the device. The original tool is accompanied by passports for the electric screwdriver itself, a charger, as well as an instruction manual in English and Russian from the Makita brand, and a quality certificate.
The complete set of a fake, at best, will be limited to instructions in a foreign language without specifying the brand of the instrument.
Latches
The original latches always have a logo, which cannot be said about a replica.
Battery
Pay attention to the characteristics of the battery of the model you are going to purchase. Often, a fake can be identified by color and shape.
Latches
The original latches always have a logo, which cannot be said about a replica.
Release Button Color
In the original, it is grayish in color. Red is fake.
Double sleeve chucks
Makita does not complete its drills with double-sleeve chucks.
Producing country
The original has Japan, USA, China or Romania. Fakes have Malaysia.
Voltage
Before purchasing, check the voltage of the selected model on the manufacturer’s official website. So, for example, the Makita 627 model has a voltage of 12 volts in all configurations. Fakes are often labeled 14 or 18 volts.
Barcode check
Makita. popular tools of excellent quality and impeccable functionality.
Especially on the eve of the holidays, the Internet begins to “dazzle” with advertisements for the sale of various models. How can you identify a fake?
First of all, we pay close attention to the case itself. In the original, it has a blue-green color with a three-dimensional logo. For fakes, the logo is either pasted or painted.
Promotion “All for 130 rubles
We took advantage of the generous action of a certain individual entrepreneur Verevka Evgeny Ivanovich “All for 130 rubles”, bought a batch of counterfeit goods and continue our journey along the warpath with counterfeits.
Manufacturer
I would like to touch upon one more question. These are manufacturers. Or rather, the countries where real electric tools are produced under the Makita brand.
Makita does not have a certified and official production in the CIS countries.
- USA;
- Germany;
- Japan;
- UK;
- Romania;
- China.
Pay attention to the markings of Chinese screwdrivers. It does not indicate made in China, but the characters Y / K.
In Russia, gray screwdrivers are common. These are the same originals, but not with full markings for the Russian market. This is due to their illegal import into the country.
Buying such devices is not scary. These are real screwdrivers, but they will not be covered under warranty. Repairs are entirely at your expense. If this does not bother you, you can save on the purchase.
Housing
If you put two electric screwdrivers side by side, it will not immediately be possible to easily tell the difference. Although one is fake and the other is original.
Scammers who actively disseminate parodies of real power tools from Makita use external similarities.
But there is still a difference. It is as follows:
- double-sleeve counterfeit cartridge;
- the adjustment scale for a real instrument has a gray background, and for a fake it is black;
- this device has a metal tag on the back;
- the fake has a sticker there;
- genuine instruments have a serial number stamped with the year and month;
- the model name and data on the manufacturing plant are additionally indicated;
- fakes will only have a sticker with information;
- the hook for wearing on the belt must be installed on both sides, and for fakes it only has one.
I see no point in dealing with the filling. No one wants to open a new tool and lose the guarantee.
Yes, and other differences are enough to identify a fake without the need to disassemble the power tool.
Examining the battery
Also, the quality identifier will be the battery.
Xiaomi Screwdriver Kit VS Other Teardown Tool Set?
It has its own distinctive features:
- the branded battery has an inscription that it is a 10.8 V lithium-ion battery with a capacity of 1.5 Ah;
- fakes go to 18 V, but the capacity is the same;
- in the original, the screw is always sealed, and there is a sticker on the case with the battery marking;
- the quality of plastic is much higher for real products;
- different seats for the battery.
Due to the difference in the seats, a non-original battery will not be able to connect to a real Makita screwdriver.
Take a separate look at chargers. The non-original has it installed in the battery.
Real chargers are different. They have a sticker with the model name, and below the detailed information with markings. Fakes do not have this.
Having disassembled the battery, you will see the charging unit and the board located in the battery at the fake. Real batteries only have a control box.
By the way, try punching the marking number on fake batteries. The search will show that such devices are used in flashlights.
Xiaomi MiJia Wiha Real VS Fake (UnboxOnly)
Makita uses high voltage components from Sony and less often from LG for its screwdrivers. This information is printed on the batteries themselves.
How to distinguish an original Makita electric screwdriver from a fake
Hello everyone! Almost every man in the house has a set of power tools. This includes a drill, an electric screwdriver, an angle grinder, etc. There are manufacturers whose products are trusted by most buyers. Makita is a prime example of such a brand. Many are thinking of purchasing their proprietary screwdriver replacements. The question is how to distinguish the Makita electric screwdriver original from a fake.
The brand’s prominence has led to the emergence of a large number of fakes. And many of them look identical. But this is only at first glance.
With a detailed study, you can understand how to distinguish a Makita electric screwdriver from a fake, and not fall for the tricks of scammers.
What makes a fake
There are several points to rely on to identify a fake Makita electric screwdriver.
You should start with the packaging. Yes, you can still study the insides of the tool, but for this you have to disassemble the electric screwdriver.
There are several ways to tell the difference between a fake Makita electric screwdriver and an original. From these characteristic features we will build on.
We start with packaging
If the price is in line with the mid-market price tag and the seller seems honest, do not rush to buy the instrument.
The appearance of the packaging is already capable of giving away a fake. You just need to know what a real packaging option for a screwdriver looks like. It will not be difficult to distinguish it on your own.
- The original is always placed in a special plastic case. There should be no other options;
- The name must be made by casting. A fake is given by an ordinary sticker;
- Look at the latches. In a genuine case, the brand name is embossed on these plastic elements. The fakes have no inscriptions here;
- Real cases bear a sticker with the marking of the purchased power tool;
- On the original, the case has a cardboard shirt. Here is applied information about the importer and other information about the device inside;
- Fakes are completed with instructions in English only. over, in different models of screwdrivers, it will be the same;
- The original has a full passport for the instrument itself, separately for charging. Additionally, there is a quality certificate, manuals in English and Russian. Unlike a fake, the instructions clearly state the Makita brand.
But not only the packaging can distinguish the Makita electric screwdriver original from a fake.
Top Tips
So that you don’t have a fake Makita screwdriver instead of the original at your disposal, rely on 2 main tips.
What is the danger
The consequences of using fakes are enough. Therefore, I do not advise them to buy and use for repairs.
Buying an original from Makita eliminates these problems. Plus you can count on repairs under warranty.
Have you come across Makita power tools? What is your impression? Once caught on fakes and how did you find out about it?
That’s all for me. Thanks for attention!
Subscribe, comment, ask questions and tell your friends about our project!
Latches
The original latches always have a logo, which cannot be said about a replica.
electric screwdriver Makita how to distinguish the original from a fake
Makita. popular tools of excellent quality and impeccable functionality.
Especially on the eve of the holidays, the Internet begins to “dazzle” with advertisements for the sale of various models. How can you identify a fake?
First of all, we pay close attention to the case itself. In the original, it has a blue-green color with a three-dimensional logo. For fakes, the logo is either pasted or painted.
Battery
Pay attention to the characteristics of the battery of the model you are going to purchase. Often, a fake can be identified by color and shape.
Voltage
Before purchasing, check the voltage of the selected model on the manufacturer’s official website. So, for example, the Makita 627 model has a voltage of 12 volts in all configurations. Fakes are often labeled 14 or 18 volts.
Release Button Color
In the original, it is grayish in color. Red is fake.
Producing country
The original has Japan, USA, China or Romania. Fakes have Malaysia.