Diamond band saws for cutting stone
granite wire saw has high cutting efficiency and long service life. The wire saw can cut a maximum of 25 m2 / m on some average hard granite quarry.
5 additional marble frankfurt abrasive stones for marble polishing used for fine grinding on marble travertine or artificial stone surface. There are 5 additional marble abrasives in the dialog as well as 10 additional marble abrasives
Diamond polishing floor can be used for polishing the surface of marble granite concrete floor to get high gloss grade. Dialead can supply 10000 sets of polishing floor every month in america
Magnesite fixture abrasive for granite polishing is widely used in automatic polishing machine. Child sold 3 to 5 containers of granite fickert magnesite abrasive material each month Iran-Esfahan, Tehran, etc. д.
Magnesite frankfurt abrasive stone For marble polishing can use rough grinding on marble or travertine or auxiliary slab or tile. Dialead can produce 4000 boxes of Frankfort marble abrasive stone a day.
It has two different formulas of 2000mm marble diamond segments for. dialead now supplies more than 300 sets of marble diamond segments to saudi arabia
diamond diamond segments d3000mm for block cutting can be used for cutting granite block in single block cutter and multi block cutting. We have sold many 3mtr granite diamond cutting segments to ukraine and russian market.
granite circular saw is used for plate cutting machine with high sharpness and long life.diamond saw disks range in size from 12″ to 140.
As for the segments, after years of testing and applications again and again in domestic and foreign markets, we now get our hot seller in many countries, such as 2000mm granite segments and multi-knife segments in Indian market, 400mm and 1200mm and more; 1600mm marble and granite segments in Iran market, 1200mm multi-knife segments, 2000mm and 3000mm granite segments in Ukraine and Russia market. in addition, 350 mm saw blades and 3000 mm granite segments are gaining high recognition in the North American market.
Dialead T Turbo Segmented granite blade patented new saw blade. it is designed to bend a variety of stone materials.
The dialead soldered faora j-groove blade features high sharpness, smooth and flat cuts, no chipping and a long service life. It can be used for other cutting5
The dialead hot dog glass blade is extremely sharp and long lasting. hot dog shape provides a clean cut
The ultra-thin turbo blade is designed for fast and smooth cutting. It can be used for a variety of materials such as marble, granite, tile, ceramic, etc. д.
Fast and smooth cutting Dialead blade with continuous clean turbo tile. Clean turbo design provides good cutting action.
Dialead Continuous Hook Tile Blade is highly sharp, and a formula with good segments is applied to tiles Dialead Continuous Hook Tile is highly valued in many markets such as Europe and North America market5
The Dialead blade can be used for a variety of materials such as stone, brick, concrete, masonry, etc. д. We supply a lot to Europe and North America.
Dialead Gangsaw segments can cut marble of different hardness. Thanks to 100%.On a cobalt basis, our band saw segments retain their high and consistent performance when cutting marble.5
The d-shaped marble cutting segments are specially designed for hard marble in Pakistan, Karachi, Mardan etc. д. Dialead cutting segments are good for solar gray, apple gray, black, gold, etc. д.5
1200/1600 mm multi-blade block cutting segments with high sharpness and good service life. Suitable for Italian Simec multi-blade block cutter and Chinese curb cutter5
dILEAD 1600mm block cutting segments warmly welcome in mid asia market and russian market.Dialide cuts granite even in hardness grade 5
The 900mm diamond cutter is one of the best selling products of our factory. We are now supplying diamond segments to various areas of pakistan like Peshwar,Lahore,Mardan,Karachi etc. д.5
Equipment
Automatic carriage feed in X axis with variable speed from 0 to 7m/min (both forward and backward). Automatic raising/lowering of disc in Z axis. Main motor 5 kW, 2800 rpm.min, disc diameter 250-300-350 mm. Bridge tilt 0-45° (manual).
Galaxy. stone cutting machine with 4 functions: 1. Stone cutting in all directions with straight disc with lateral segments; 2. Cutting holes in stone with a minimum radius of 15 cm with a cup-shaped disc with lateral segments; 3. Cutting grooves with 6 or 8 mm radius with edging discs; 4. Cutting a 5-point parallel groove in the stairs with a special router.
Galaxy. Stone cutting machine with 4 functions: 1. Cutting of stone in all directions with straight disc with lateral segments; 2. Cutting out apertures in stone with a minimum radius of 15 cm with a cup-shaped disc with lateral segments; 3. Cutting a groove with a 6 or 8 mm radius with cannelure discs; 4. Cutting of 5 parallel slots in steps with a special cutter.
Powerful 1600 Watt. Speed of rotation 2000. 7000 rpm./min. Weight 5 kg. Flange 22.2 mm. Cutting depth up to 52 mm. disc diameter 180 mm.
The CS 60 Wet from Flex is suitable for many different types of materials and conditions, such as façade tiles, flooring, stone for landscaping, building materials, etc.
Angle grinder in a compact 1200 W machine has adjustable speed from 2800 to 12000 rpm, the possibility to install a wheel with a maximum diameter of 125 mm, double insulation, soft start possibility, protection against backfire (clutch with Super-Joint-System technology), speed stabilization system, complete with additional side two position handle, socket wrench and protective hood. The machine is designed for dry cutting and dry grinding of materials.
The Bosch GCT 115 Professional 0601391001 is widely used on construction sites. Low weight and dimensions make it easy to carry the device to the place of work. Saw blade is easy to replace, resulting in short set-up times. Vacuum hose included, which effectively removes dust from the work area. Equipped with a 720 W motor, the machine is characterized by high performance. Without water cooling.
For ceramic tiles and natural stone.
BED 69. Diamond core drilling machine for holes Ø 4-14 mm at the face of façade tiles. Designed for drilling the ends of facade slabs for anchoring. Specially designed lever mechanism allows precise, right-angle drilling without mitre cuts.
Productive and functional stone cutter for regular and continuous use.
Hydraulic milling machine. With the ANTAREX, it is possible to mill slabs of marble and granite. Plunge depth of cutter 0-40 mm so it is possible to cut tiles with complex shapes.
The SCS7 is the ideal solution for fast, precise cutting of all masonry and other materials up to 55 mm thick.
Safe hydraulic drive, easy working thanks to perfect balancing of the machine, spindle speed adjustable 0. 7000 rpm, perfect aqua-planing system, water cooling of the tool inside and outside. Works with a hydraulic power unit.
Safe hydraulic drive, comfortable working thanks to excellent machine balance, spindle speed adjustment 0. 7000 rpm, excellent aqua-planing system, water cooling inside and outside. Works with a hydraulic power unit.
Two suction pads hold the bar securely on the polished stone surface. Integrated ruler makes it possible to precisely locate drill holes. Tool mount hole 43 mm.
Three suction cups for a firm grip on the surface of the stone and reduction of vibration during drilling. Housing is made of aluminum to reduce weight. Precise and sturdy carriage mechanism. Tool mount hole 43 mm and 59 mm.
Concrete saw: purpose, specifications, types
Cutting reinforced concrete with diamond wheels, which uses an electric circular saw, is the most effective way of such treatment of concrete structures, but it is not always available and applicable. In conditions of difficult access or lack of power to cut stone a chainsaw for concrete can be used, and we want to talk about it in more detail.
Concrete chain saw makes it possible to cut reinforced concrete and monolithic structures.
Concrete saw
Design and function
Gasoline cutters are used for demolition work.
Hand saw for cutting concrete allows you to greatly facilitate the processing of reinforced concrete, stone, composite, brick and monolithic structures during all kinds of construction work. Wall saws with diamond blades are traditionally used for cutting reinforced concrete, but are not always available.
The fact is that the weight and dimensions of such machines are quite large, and therefore they can not be used in hard-to-reach places, confined spaces, during high-altitude work in industrial climbing and other similar areas. Handheld circular saws are not deep enough to make the cut.
Wall saws are often too cumbersome and heavy.
Therefore, hand-held chain saws are always used when carrying out work using wall saws and other heavy equipment. The saber design of the cutting headset allows you to work to a sufficient depth of cut. 30. 40 cm, in addition, it allows end entry of the saw and cutting with a turn of 90 degrees, which is important for the construction of openings and niches.
Band saw for foam concrete allows you to make cuts at a sufficient depth.
The main cutting tool of the device is the diamond chain, stretched on a special bar that drives and guides the chain. Chain for chainsaw for concrete has special tips in the form of diamond-coated segments, which makes it more durable and efficient.
The guide bar and the chain are detachable from the saw like a headset, which simplifies maintenance and repair work.
The machine has a power unit. gasoline or electric motor.
Gasoline-powered unit, as a rule, has a two-stroke principle of operation and protection against moisture and dust. Torque is transmitted to the chain by clutch or reducer, most often modern tools have automatic centrifugal clutch that allows to immobilize the chain at idle speed or stop it in case of jamming or other emergency conditions.
A chainsaw blade for stone is different from a traditional chainsaw for wood. It is made more complicated by channels that carry water to the chain. Water is needed to cool the cutter bar and to remove concrete and sand slurry, without which the chain can not operate for a long time.
If the tool is equipped with an electric motor, it is usually a brush single-phase AC 50 Hz and 230 V. The power of the electric motor can range from 1 to 3 kW, sometimes there are more powerful machines. Special attention in the design of electric saws is paid to the protection of the engine from water and dust.
Important! Handheld concrete sabre saws are used for cutting concrete, stone, brick or asphalt in hard-to-reach places during construction and demolition work. It is also advisable to use them for small volumes and sizes of constructions.
Area of application
Power saws and gasoline concrete cutters can be used for cutting such materials:
- Cellular concrete, including aerated concrete, aerated concrete, gas silicate, cellular concrete and similar materials;
- Lightweight concretes, including expanded clay concrete, pumice concrete, perlite concrete, polysterene concrete, arbolite, kostroconcrete and the like;
- Dense and heavy concretes with Portland cement, asphalt, slag cement, polymer binder and other kinds of binders. Heavy concretes can be cut with weak reinforcement;
- Silicate and ceramic bricks, clinker, building blocks of foamed concrete and other materials;
- Natural stone;
- Porcelain stoneware and other artificial stone;
- Gypsum, plasterboard, chalk, limestone;
- All kinds of composite and complex building materials made of solid substances.
As can be seen in the photo, it is possible to cut small holes in natural stone.
These saws are most commonly used in the following areas:
- Dismantling works on demolition of walls, partitions, slabs, columns, diaphragms, transoms and other elements of fencing and bearing building structures;
- Works on redevelopment of apartments;
- Construction of additional window or door openings in walls, as well as adjustments to existing ones during major renovations;
- Finishing corners after disc machines;
- Cutting recesses, apertures and openings;
- Creating chinks and cutting slots for electrical outlets, cutting various channels and ducts as well as air vents and ducts;
- Cutting of building materials such as concrete blocks, reinforced concrete and stone, bricks, foam concrete and others.
Circular saw MECATOME T202
Circle diameter: 200 mmCutting capacity: 40 mm
Precision handheld micro cutting machine. Metacome T202. Rugged and compact precision cut-off machine with the ability to gently chop off a wide range of. It is equipped with a powerful brushless motor, which enables it to work.
MECATOME T260 cutter saw
Diameter disc: 300 mmCutting capacity: circle: 95 mm
Handheld cutting machines with vertical and horizontal clamping system. MECATOME T260. is a powerful and precise cut-off machine, designed for cutting medium-sized samples from a wide range of materials of different hardness, from.
Diamond cutting of concrete: quality cutting methods
Diamond cutting is performed by different types of devices. The main condition. the use of a diamond disc, which allows you to perform all kinds of work of varying complexity.
Diamond cutting of concrete can be performed using the following tools:
- The use of an angle grinder. an angle grinder, which is better known as an angle grinder.
- Wall saw machine. the movement of the diamond disc is carried out along the guides. Such a machine for cutting natural stone is actively used in the process of construction and finishing works, when it is necessary to cut walls, flooring and all kinds of overlaps.
- Floor cutters. diamond cutting, which is suitable for horizontal cutting of flooring and different overlaps.
- Handheld stone cutter augmented with a special diamond-coated chain.
Diamond cutting of concrete allows you to perform all work as quickly as possible and with a minimum amount of dust. And the vibration level remains at a permissible level, which guarantees that the entire work process is performed in comfort.
The stone cutter: features of the motor location
Stonecutter differs in different operational features, which directly depend on the location of the engine in each model. According to this criterion, all tools are divided into two large groups:
- The downward-facing motor is the perfect solution for home use when a small amount of work needs to be done. The tile cutter is used for cutting medium-thickness tiles, where no particular effort is required. The main advantage of this device is its compact size. Such diamond cutting presupposes cooling of working disk by dipping it into special water tank.
- Stoning machines, whose motor is located on top. in this category there are professional tools that guarantee a high precision of cut. Designed with a water pump that turns on automatically after the machine has been started. The presented tile cutting machine is able to cool the diamond wheel and prevent dust from spreading.
As a result, to understand how to cut ceramic tiles, you need to consider the technical components of each chosen model.
Saws for cutting stone
Banso 200 meat cutting band saws.563 TPI. Blade. crosscut saws. Saw blades.
100%
Banso 160 meat cutting band saws.563 TPI. Band saw. Tile saws. Circular saw blades.
100%
99%
100%
100%
98%
99%
99%
99%
FABA PI-504 V wood saw, crosscut saw, Faba circular saw, circular saw
93%
Diamond grinding disc 230 mm for cutting and grinding under flange for stone, granite, marble, gabbro, concrete
95%
Makita DUC CS-4002 cordless chain saw (40V, 6Ah) AKB wood saw, makida wood cutting saw
Glass stone band saw blades with diamond coating for cutting cliff with ultra-thin coating
Leafun Segmented coated diamond band saws provide coating intervals that match the diamond particle size to the surface quality requirements of various materials.
Product Information
Leafun Gulleted coated diamond band saw blade uses laser welded high-strength, high-strength and thin steel workpiece.Resistant to metal fatigue that is not easy to break.Cutting part is electroplated with NI-CO coating and high quality composite coating with diamond particles.The solid coating and steel blank have a high strength joint, high sharpness and long life.
Diamond band saw with grooved coating, the coating of the working part is distributed along the workpiece in a segmented design.Segmented structure has more space for chip removal and heat dissipation.Product is suitable for a larger effective cutting range and the cutting effect is sharper.
Parameter
| Product code | Overall dimensions | Grit size | Scope | |||||||||||||||
| Width | Thickness | |||||||||||||||||
| mm | inch | mm | ||||||||||||||||
| BC-FC010 | 10 | 3/8″ | 0,5 / 0,65 | D126, D151, D181, D252, D301, D356, D426, D501, D601 | Composite floor cutting, Composite interior cutting, Carbon fiber composite material cutting, Fiberglass composite material cutting, Construction fireproofing insulation material cutting, Construction concrete material cutting, Stone cutting, Mineral cutting, Steel wire reinforced rubber cutting, Artificial organic composite material cutting, Industrial ceramic pipe cutting, Industrial ceramic block cutting, Fireproof cutting, Glass cutting, Graphite material cutting, Cr | |||||||||||||
| BC-FC013 | 13 | 1/2 in | 0,5 / 0,65 | |||||||||||||||
| BK-FC016 | 16 | 5/8 | 0,5 / 0,65 | |||||||||||||||
| BC-FC020 | 20 | 3/4″ | 0,5 / 0,8 | |||||||||||||||
| BK-FC027 | 27 | 1-1/16″ | 0,5 / 0,7 / 0,9 | |||||||||||||||
| BK-FC034 | 34 | 1-3/8″ | 1.1 | |||||||||||||||
| BC-FC041 | 41 | 1-5/8″ | 0,5 / 0,8 / 1,3 | |||||||||||||||
| BK-FC050 | 50 | 2″ | 0,9 | |||||||||||||||
| BK-FC054 | 54 | 2-1/8″ | 1.1 | |||||||||||||||
| BC-FC067 | 67 | 2-5/8″ | 0,7 | |||||||||||||||
| BC-FC080 | 80 | 3-1/8″ | 0,9/1,1 | |||||||||||||||
| BC-FC100 | 100 | 4″ | 0,9/1,1 | |||||||||||||||
Precautions when using
Before use, run it idle for one minute, check that the machine is running normally, and wear masks, gloves, goggles, and other protective equipment.